Ford F-150 (2004-2008) :: 2006 Model Receiver Hitch Will Fit On Truck?
Apr 4, 2013
I have a 2004 Ford F 150 and I was wondering if a receiver hitch off of a totaled 2006 would fit on my truck?
View 4 RepliesI have a 2004 Ford F 150 and I was wondering if a receiver hitch off of a totaled 2006 would fit on my truck?
View 4 RepliesFabricated own receiver hitch for the front? The ones available exit under the bumper and hang way to low, severely limiting approach angle.
I am planning on building one that exits through the large hole in the middle of the bumper, similar to the 99-07 style. I will use it for my custom generator mount and/or a small winch.
I've never used a rust converter, so I have no experience and wanted to hear from those who have. I've got some light rust on the frame rails and the hitch receiver. What product would you recommend, or do these products work well enough to consider? According to all of the websites, they all work miracles...
View 3 RepliesI am interested in a 2004 and wanted to know if I add the curt hitch .. Or maybe oem one Has the curves cover and not notched or flat does that mean it should be made after 5/2004 and could use the hitch that is tubular? Not sure if the curt version matter for any of these
Also I heard they may be prewired for towing, how to look for besides the trans cooler, if they don't have this then it seems too much work.. and I should stay away?
Also doesn't have nav, so I wanted to know if it is harder to add aftermarket screen to non nav than one with factory nav?
It seems like this is a base trim do you know in 2004 what feature might be missing from this base model That I am "missing out" on?
Found a pic of the actual car under bumper built 9/04 Does it look normal. I think I see the towing wiring box there.. was the hitch port installed option? But it looks like it's ready for one.
I currently have a S&B Intake on my 2006 f150, 5.4. I am selling my pickup and getting an 08 with the 5.4 and am in the fortunate situation to be able to have both vehicles with me currently. Question, would i be able to swap the intakes? Place the stock intake form the 08 on the 06 and the S&B fit the 08? I know the pickups are nearly identical, but just want a little clarification.
View 2 RepliesI have a 2" ball mount and a 2" ball from my previous vehicle. That vehicle was equipped with a 2" receiver as well.
Recently I had been pulling a few stumps in the front yard...nothing major, but this was the first time the ball mount has been used in my '06. So I noticed that there is some excessive (to me at least) space between the mount and the receiver on the truck. This causes some rattle between the two. I know there are collars out there that I can use to remove the rattle, but my question is...have others of you noticed the same? Do any of you have excessive play between the mount and receiver?
Will mirrors from a 2010 FX4 fit on a 2008 60th anniversary?
View 10 RepliesI've got an 06 F150, 5.4l crew cab lariat. So to start, I had a programmer screw up my ECU, so when I got it re programmed at ford, everything works except for the ABS sensors. I recently had someone break into my truck and broke my stereo when they couldn't get it out. So I was driving home from work the other day and lost my whole instrument cluster, windows wouldn't roll up or down, wipers worked very slowly until not at all. shut off the truck and wouldn't restart. I jumped it and started it. ran fine. with the exception of the previous problems. I noticed when it got dark out that my my taillights and head lights were on very dimly with the switch off. Also hearing a clicking sound coming from under the truck, at the back of the cab and front of the bed. the only thing electric that's back there is the fuel pump (i believe). I am at a complete loss.
View 5 RepliesI have a 2006 F150 5.4L 3V with 105,000 miles on it. Recently, it has developed a misfire that is progressively getting worse. It happens when the truck is in overdrive, with engine RPM between about 1200 to 1800. Cruising at this RPM the truck runs great. If I increase the throttle, I develop a pronounced misfire. Once the truck down shifts out of OD and engine RPM exceeds 2000 RPM the misfire goes away. I have never had the CEL light come on during any of these events. The truck has the original plugs in it AFIK. I have not changed them.
View 6 Repliesi need a serpentine diagram of my truck in order to place it back on.
View 4 RepliesI need to change my plugs in my 06 5.4 122,000 miles truck is bucking and not right under acceleration but its my only transportation to work and I am afraid of breaking a plug and then having no clue what to do after that. Need input on making the plugs come out easier ...
View 6 RepliesI just went out to move my truck to take out garbage and it cranks but doesn't start. It is 4.6L 4WD. I sprayed ether in intake no change. Checked all fuses all good. It has been raining pretty hard the last 3 days and it has been sitting in rain all 3 days. I checked for codes with a simple code scanner no codes. But the code scanner I used is not able to do KOEO or KOER tests. I know it needs new plugs but it has never sputtered or died on me. Has slight misfire but not engine stopping. I havnt had any check engine lights or problems before.
View 3 RepliesI remember reading that some common problems that plagued the 2006 Passat have been removed or rectified for 2008. what was improved or rectified in 2008 over '06 and '07?
I'm planning to trade-in my '06 Passat for '08 if I can find a good deal and would like to know the above.
Ok so I dropped off my 06 at the dealer for some warranty work and got an 08 for a loaner. They are both 2.0t tips. The 08 is a ton faster than my 06. It spins the tires all thru first gear if you turn off the esc and stand on it from a stop. I thought mine felt good but this one is better.
View 19 RepliesLong delay bringing new travel trailer home last week. Shift cable not placed properly in retainer during assembly (there is NO way it popped out) and it was resting on exhaust manifold. Evidently towing camper made enough heat to burn through the shielding and truck trans would not move out of drive.
The good news is that I could climb under (getting too old for that stuff!) and put it into gear/park by hand. But of course I didn't know that for the first 4 hours.
I drive a 2006 Lincoln Mark LT and recently had a new heater core installed, but now when I try to drive it, it cuts off on me once I get out of the driveway. It starts back up fine, but then cuts again seconds after I try to drive. When I start the car it idles fine. I could have it idling for 10 minutes plus and have no issues, but once I shift it into gear and begin to back out of the drive way it shuts down again.
View 6 RepliesWill an engine from a 2010 f250 5.4 work in my 2005 f150 5.4? f
View 7 RepliesI have a 2006 f150 fx4 4x4. I drove it home from work yesterday and it ran and drove just fine. I got up this morning to go to work and turn the key but the engine won't fire. I turns over just fine. I turn the key to release the trans to put it in neutral to see if it would start like that and the shifter is stuck. I button in the front will not go in. I tried lifting the rear tires off the ground to see if I could free the trans.
View 4 RepliesMy 2006 f150 was making a noise that's coming from the engine. It sound like rocks in the engine. When I'm going 50-60 MPH the engine starts to make a sounds like rocks in the engine. What's happening. When I go about 40 it stops.
View 12 RepliesI went for a tour with my truck and everything was fine, 5 minutes before getting home I heard a squealing coming from under the hood, I then lost all my gauges inside the truck. The truck didn't shut off so I drove it home. when I shut it off I tried restarting it and it wouldn't even roll over. I tried boosting it and it still won't even crank over.
View 1 Replies2006' screw, 5.4L, 116K miles ... The truck looses power at highway speeds to the point that I need to pull off of the road. When this happens the check engine light is on and the truck is still running but will not accelerate, is it possible the computer is going into limp mode and if so what would cause this?
View 1 Replies