Have a 2006 F150, head gasket leaking bad. It is the drivers side head. How many hours this job is? and does the engine have to come out or the cab have to come off? Has a 5.4L Engine.
View 3 RepliesA year ago (to the day), my car (2006 Hyundai Sonata) died on me while I was driving it. My boyfriend came and gave me a jump. The car got home fine. The next morning, we went out to the car, and the battery had died, so we jumped the car again, and got to the battery place and bought a new battery. I was worried there was another issue with the car- but my boyfriend was all like "You are feeble woman who knows nothing about cars" (kidding, kidding) so I listened to him and drove the car off that afternoon. On my way home, car died again. So, this time, we got the car towed to a dealership to get checked out. Well, turns out the head gasket was leaking and there was oil in the alternator. SOOOO. The dealer replaced the head gasket for free because the car had a warranty on the engine, but we were SOL with the alternator. So, we bought an alternator from a friend, and had another friend install it for us.
Yesterday, I got out of work, and car wouldn't start. When my DF came to jump the car, he and I could clearly see the head gasket is leaking again and there is oil in the alternator. I have a couple questions that I need answered...
1.) What causes a leaky head gasket? My boyfriend said that either the engine block was warped or that the replacement they put in last year was faulty. Are there other ways?
2.) How the beep do you replace the alternator in the 2006 Hyundai? It is in an odd location and we don't have access to the person who did it for us last time, so I need to see if this is a job my boyfriend can do. He does work on his car all the time (an 87 BMW), but he's never done anything on this car besides change oil, etc.
A little bit about this car: We bought the car from a Hyundai dealer in June 2010. It belonged to one of the dealer investors, so it was in great condition. However, we think the car was in a front-end accident. When my boyfriend waxed the car awhile back, it was pretty obvious that the front bumper was replaced as well. The dealer refuses to give us any mechanical records about the car (will only give us verbal summary) ...
My wife has a 2002 F-150 King Ranch 5.4l. Recently I noticed a oil smell and I had the mechanic take a look. He said the head gasket is leaking oil. Not a bad leak but it is leaking. The truck has 160k miles on it. I can't decide what to do...
What generally happens with a head oil leak? Will the engine crater or just keep leaking? My plan was to buy my wife a different truck and I would keep the truck, but I don't wont to keep it if the head leak is terminal for the engine...
I have a 91 Ranger V6 4WD with 150K that has been sitting for 7 years. The last time I drove it (7 years ago) to a mechanic, who diagnosed it with a bad head gasket - leaking coolant and coolant in the oil.
What am I looking at as far as a project: besides redoing the head gasket, what else will I most likely need to do given that its been sitting 7 years?
My 95 Ranger has been a good truck in the 6 years I've owned it. I had to pull the heads to replace a leaking head gasket and wound up having the heads rebuilt due to weak valve springs and worn valves. I replaced the gaskets, installed the heads, get it all back together.....won't start. Fuel pressure is good. Found that there is no spark. While putting the crankshaft position sensor connector back on I noticed it didn't look too good. I replaced the connector and that's all I did and no spark. Long story short, after a lot of research, the coil pack, cps and coolant temp sensor were replaced and still no spark.
Everything has the proper voltage to it. After a little more research I found a post with the same basic issue. His issue wound up being the ecm. So I removed the ecm....it's a used one from a salvage yard. I've owned the truck 6 years so I have no idea when the ecm was replaced. It showed up today and will get installed when I get home from work. I also ran across posts about the camshaft sunchronizer and they should be replaced at about 80K miles. Since the truck has 289K I'll replace it. Still no spark. I'm hoping it's the ecm.
I am working on my buddy's 1994 Ranger with a 2.3L I4 that has been going thru a large amount of engine coolant. The trucks has approximately 180,000 miles on it. When I had it parked on concrete I have not seen any signs of coolant on the concrete or any signs of coolant leaking. The next place I checked was inside the cab to see if there was any coolant from the heater core and there was not. The water pump has been replaced a couple of years back. I replaced the spark plugs today and did not see anything on the plugs that I would have thought were signs of coolant in the combustion chambers.
With that being said I have not worked on a vehicle with a leaking head gasket before. Would there be any visible signs on the sparks plugs? If so what would I be looking for? When standing in front of the vehicle with the engine running there is a slight smell of antifreeze being "vaporized". Are there any noted issues with this engine that would cause this? Are there any other things I should check? Could it be a leaking head gasket causing this? If so how can I check for that?
I have a 97 with a 4.6 Triton motor I need to replace the head gasket on the passenger side number 3 is leaking nothing else is wrong with motor so I have it torn down to timing chain cover and ready to remove. do i have to take the drivers side valve cover completely off to take timing chain cover off or can I take to first 2 studs out of the drivers side front valve cover and side the timing cover off. I just want to replace the passenger side head gasket and get rid of truck.
View 6 RepliesI LOVE my Super Duty and with only 15k on it (have a company truck) plan on keeping it for a long time. I've had an EGR Delete and new Oil Cooler along with some misc things done to the engine and turbo, about 6g's worth. Now my mechanic at NCB is telling me that the reason I'm loosing coolant is that my head gaskets are leaking. I'm looking at another 5-7 grand which is a no go for me. I'm thinking of doing the work myself, especially since I've seen where i don't have to remove the body to do it.
Okay, here is the question, I've been having a hard time finding a comprehensive list of the parts I should be getting to do the job. Looking for a list or link on what I need to do it correctly and anything I might want to do while my engine is apart so I don't have to do this again?
I just bought my 2006 Toyota Prius about a year ago in 2009. It has been treating me LIKE GOLD !!! up to this point. About a month or two ago, the check engine light came on and stayed on along with a big red triangular warning light. I let it go for about a week hoping that it would just go away.
I brought the vehicle into my local Toyota dealership so they can diagnose it.They told me that they had 3 or 4 different "codes" coming from the machine when getting the signals from the check engine light. All the codes were related to the cooling system. They said that they felt that there was "debris" clogging the pathway for the coolant flow throughout the engine. They had recommended a "coolant flush" for the hybrid side as well as the mechanical side. So I took their advice and I had them perform the coolant flushes.
After leaving the dealership that 1st time, the check engine light came back on the next day. I called the same dealership and explained it to them. They asked me to bring it in again. SO I brought it to them a 2nd time. They diagnosed it again. They told me they came up with 2 of the SAME "codes" and 1 that was different, but ALL the codes were STILL related to the cooling system. They explained to me that something was preventing the clear flow of coolant throughout the engine. And since the thermostat was the only major obstacle, they recommended that I replace it. Well, I did. And after I left the dealership that 2nd time, I was praying that this was the last of my Prius issues! The check engine light came back on the next day.
Have my oil leaking-passenger side head gasket replaced (along with the drivers side for preventative measures).
To ease my mind at such an expensive repair on a truck I just recently bought, I was wondering what else gets replaced with this repair.
Obviously the head gaskets along with head studs, coolant and oil, but anything else? valve cover gaskets? intake gasket?
To all those folks that said I had a head gasket putting pressure into my cooling system and causing it to overheat, you were right. It is a 2003 F250 with 80000 5.4 l. I have had to replace mexhaust manifold bolts on left side (horrible job, couldn't get one out). Back fenders are rusted out, under the extended cab rusted, doors are rusting at the bottom. My friend/mechanic said it was time to get rid of it. I don't really have thousands of $$ for a different one, but also, replacing the head gaskets are in the thousands for a repair bill. I have looked at used 2008 250 4 door and they are 20000+++ sheesh, but a new one is out of the question. Do I get the gasket situation repaired?
It does not act up all the time, some times it never overheats, sometimes it will. Somewhat infrequent ( I had one mechanic look at it and he tried 3 different times, and it did not overheat. Temp gage will peg, coolant resevior will overflow, but is not hot (100 degrees). I dont have the really have the money to put into a newer model, but I am worried about being nickeled and dimed to death after dumping a couple of thousand into a head gasket, plus I suppose I need to have the other side manifold gasket/bolts checked too. It seems like low miles to be having issues, yes I realize all will rust, but this year, as evidnet in our area, was really suspect-able to rust.
Not worried about the body, is it worth it to spend 2500 for head gasket repair, or trade up a couple of years, less miles, etc. My worry is, I already had to fix 1 exhaust manifold gasket, know head gasket to fix a cooling issue, do I cut my losses and move to another truck, or spend the money for repairs. I don't really have money for either but want to make a good decision. Truck has not been abused and has been serviced as scheduled. Had to put on new brakes and rotors, as would expect, and ball joints too. Oil looks fine, no contamination, and coolant is clear. Will the head gasket get worse? As I said before, it is intermittent, but I don't trust it for long trips.
I have a 1995 GMC Sonoma pickup truck with supposedly a blown cylinder head gasket. It only has 53K original miles on it. It overheated and I had it towed to a service shop. They put in a new water pump, new coolant, new thermostat, new radiator hose and did an oil & filter change. Well, 100 miles later, I noticed my water coolant was disappearing and the oil pressure was rising. I brought it back to the same shop and after looking at it for five minutes they informed me it was a blown cylinder head gasket. They said they had no way to determine this when they were doing the repairs the first time. So, I ask the following:
1-Was it proper for the shop to do the first repair without checking for a potential head gasket leak?
2-Is there some type of testing that could have been done by the repair shop to check for coolant leaks into the engine oil? 3-Would I have saved money (labor) by having this taken care of at the time of the initial repair?
Working on a 2000 F150 with the 5.4 and as near as I can determine its leaking antifreeze externally at the front of the passenger side head gasket. Seems a little odd. The coolant is a nasty dirty orange color. With the truck running on the hoist it was dripping very steady off of the very front exhaust manifold bolt.
View 3 RepliesI have a 2000 Toyota corolla with about 170,000 miles and it is using about one quart of oil every 500 miles. The last couple places I took it to said the compression was bad in the number 4 cylinder. Another place said it was a leaking head gasket. Which is most likely, and is it worth getting it repaired given its age and mileage?
View 13 RepliesI have a 1998 Subaru Forester that is leaking oil through the head gasket. Repairs for the head gasket seem to be in high range, which is at or above the value of the car. Is trying any of the head gasket sealant products such as Blue Devil worth trying? Do they have the potential to do more damage than good? I love the car, but I'm also not sure if it is worth getting if fixed or if I should be looking to sell it for parts and buy a different used car.
View 15 RepliesI have a 1997 Saab 9000 CSE Turbo. It has been a great car overall. Last summer, our water pump died while cruising on the highway, leading to a major overheat, leading to warped head. We decided to roll the dice on a rebuild, which was done by a reputable import specialty shop that has worked on many Saab 9000s. Since we got the car back 5000 miles ago, we have lost a few miles per gallon, and we hear a rough noise in the engine (particularly when it's cold). In the last few thousand miles, we lost a lot of coolant, apparently because the new water pump is faulty (the shop looked at it and agreed to replace under warranty). In the last 1000 miles (but no evidence of it previously), we have begun losing oil like crazy and occasionally (but not most of the time) smelling burning oil (the heater is on, moving air around). We are now adding about a quart per 200 miles. When we inspect the block, there is some small evidence of oil leakage, but not a lot, and there are never drips on the driveway.
Where is all that oil going? I showed it to the shop, we put it on the lift, and there is no spray on the underside, leaking oil pan, etc. I suspect the new head gasket is leaking, but there is little enough residue on the block that it's hard to be certain. What other explanations are there, and is it fair for me to blame the repair shop and insist that they redo the head gasket? The shop is a 6hr drive from my house, so I can't just drop by to discuss it with them.
I am working on a friend's 2002 Camry 4-cylinder on which I recently replaced a leaking head gasket. Since that was competed the car runs fine but it has been throwing the P1346 code indicating VVT/Cam position sensor performance problem. I have a code reader and I have cleared the code a couple times and it re-appears each time after driving the car a while.
I also have a 2005 Camry with same engine, so I switched the cam position sensors between the two cars and the code showed up again on the 2002 while the 2005 still is running OK, so apparently the sensor is not the problem. The 2002 had been worked on before (some head bolt holes were stripped and I had to install inserts for all the head bolts - I used NS300L inserts) and whoever did the previous work was very rough with moving around the wire harnesses, etc, so I suspect it is a bad connection causing the error code.
My question is: can the car be driven in this condition OK, or is there a potential to damage something if the VVT is not operating? I checked the basic valve/crank timing and it is OK, and the engine feels/sounds like it is running very well. Should I be worried about this, or can I wait for a convenient time to try to find the source of the problem?
2001 Chevy Silverado with a 5.3 L engine and a leaking head gasket that was getting worse (at 217,000 miles). Car has rusted body (upstate NY), so not going to spend too much for repairs. Decided to try one of those "magic elixors" in a bottle. Went for the Bars Leaks head gasket repair stuff - Followed directions, etc (put it into the top radiator tube, NOT the overflow bottle). The stuff had little strings of copper-looking stuff floating in it. It worked. After a little more loss of coolant, the coolant loss has finally stopped. Amazing that something like this really worked.
View 7 RepliesSo I've put about 1000 miles on my 03 F250 since buying it, and just the other day it's started leaking from the rear of the passenger head gasket. Enough to drip on the driveway and exhaust, and have some exhaust smell. 126,000 miles, 5.4
I've checked with my local ford dealer, and It also needs passenger exhaust manifold and studs, so the dealer price to tack that on would be a whole lot more too since there are already a couple studs broke. It would be best to get it done when the head is pulled.
I've checked with several local mechanics, and none of them are interested in pulling the head on this engine. That has me concerned about doing it myself too..especially since it fits in my garage with only a few inches to spare..
I have a 2011 RX 350, leaking coolant from head gasket. It has 113000km, engine warranty is 110000km ...
View 5 RepliesOur 05 Elantra (170k miles) is leaking coolant externally from the head gasket. At first I thought it was coming from the freeze plugs, but it's actually leaking from above. I'm mechanically inclined but have no experience with head gaskets. I have access to Alldata but no service manual. Will it tell me everything I need to know? The farthest I've gone inside an engine is removing valve covers car runs great and we like it enough to want to keep it for a while ... I'll also mention I will be replacing the timing belt as well.
View 7 Replies