Ford F-150 (2004-2008) :: 2005 - Left Front Brake Seems To Drag
Mar 5, 2012
I have a 2005 F150 4x4, with just over 75K, and I have owned it from new. I am having left front brake issues. The left front brake seems to drag, but of course does not do it consistentally or after a given type of braking event. It just does it very randomly. I originally replaced the caplier pins thinking one may have been hanging up. It seemed to fix the issue for a couple months then it happened again. So doing more inquiry it seems some have had issues with the front rubber lines.
I just had both front lines replaced with OEM Ford parts and the system flushed out at a dealer. The brakes again seemed to work fine driving home from the dealer anto work today. Then on the way home it did it again, started dragging. The truck starts to feel sluggish while accelerating and slows very quickly just lifting off the gas. then when you get out you feel the wheel and it is very HOT and you can hear a heat popping sound. (First time it happened it was smoking it got so hot.) Right side seemsfine.
Since it does it so randomly I am at a loss. I can not just drop it off at the dealer and say drive it until it. I am considering having the caliper replaced, which I really considered when it was at the dealer for the hoses since I had the IWE's done at the same time, so they were off.
View 14 Replies
Advertisement
Had a lift done (Rough Country, after reading through these forums) on my 04 F150 Newer Body Style 4x4. Now, sometimes the pedal gets harder to push on until it won't go down at all and the brakes (only the front) start dragging. It goes away after awhile (my rotors are shot and I'm going to have to replace them after I figure out what is going on) but always comes back. The brake lines have been bled and I'm having a shop bleed them again tomorrow (that's what they said the issue was) just in case.
View 11 Replies
08' 4x4. I changed the front brake hoses because the truck felt like it was dragging a bit, when i would hit the gas from a stop, that seemed to work, I also changed the front rotors because when braking I was getting a pulsing feeling in the brake pedal. that fixed that.
Now I feel like there is still a bit of a slight drag when I'm at a stop and let off the brake. when im on level ground the truck creeps forward from a stop when letting off the brake, on the slightest incline the truck wont go forward at all.
Do the truck want to move forward on a tiny incline or no?
View 7 Replies
My 2008 ford f250 SD Powerstroke has a bad front passenger side brake rub/ dragging after offroading before off roading just rubbed a little now it drags a lot. what do i need to fix.
View 2 Replies
I have a 2005 Supercrew 4X2 with 110,000 miles on it. Lately I've noticed at 30 mph and up if I steer to the left I get a growling noise from the left front. When I straighten up or steer right it goes away. I don't feel anything in the steering wheel or seat of the pants...just this growling noise during a left steer. Tires are about half wore out...I went ahead and rotated them to see if the growl moved. It didn't, stays in the left front.
Does that sound like the bearings in the rotor are on the way out? It won't stop raining so I haven't had a chance to jack it up and see if I have I have play in that tire/wheel. I thumbed through my Haynes manual and it seems pretty straight forward to replace the rotor. New rotors/bearings, one time use nut, might as well do pads while I'm in there, torque nut to 275 ft. lbs. Am I on the right track? Any other way to diagnose this growl? Is the R&R of the rotor as easy as it sounds? Tips or trick, things I should know that Haynes isn't telling...
View 1 Replies
this is my brothers truck 05 f-150 4x4, i put brakes front and back and flushed the system about six months ago now. the other day when he was coming home from college the front passenger tire locked up. he drove it home and i went over took it apart nothing was sticking put it back together and it was fine. now today he call it stuck again so i just pulled it apart, pads are now purple from the heat, pins are free, caliper moves i put a small piece of wood in it and had him press the brakes the caliper moved out and i pused it back in, reinstalled everything and its not stuck no more. what do you think is causing this? my uncle says it could be the abs box acting up, when he bought the truck my dad made him buy the extended warrenty but he wont pay the 100 dollar deductible because this past winter we all went out in the two foot of snow and he got stuck so i pulled him out and our dad says thats what f$ucked his brakes up so now his is pissed. so how can i fix this for him? oh it only has 42k on it
View 7 Replies
First I will start off by stating that my truck is a 2005 Ford F150 2WD Regular Cab 6.5 Bed, with the V6.
My problem is, when making a left turn at low speeds, I have a grinding noise that corrects itself upon straightening out the truck. This seems to happen on turns in the parking lots etc. It almost sounds like the tires are rubbing but the tires are the same BFG's that have been on the truck for 40,000 miles and have never rubbed. I am thinking it might be the power steering pump but am unsure. I do not have access to a lift right now but I have done the shake test on all of the suspension components and nothing seems out of place or loose.
View 14 Replies
Alright i have one here to stump everyone.... My uncle called me and his 05 f150 STX left speakers both front and back aren't working. I took a look at it the other day, i switched his radio with my radio from my 06 f150 stx, then I switched my front speaker out. Didn't work. I looked at his back speaker and the magnet on the speaker was stuck in the door. I checked fuses and don't see any blown.
View 1 Replies
I've had an issue with my 08' for a few weeks after returning from a 1 week vacation with the car sitting on the street in NYC. The symptoms are a noise associated with poor performance of the vehicle. It accelerates slower and requires more RPM. When you take your foot off the accelerator it feels as though there is a brake on or some additional drag somewhere in the front end. It's really evident that it doesn't actually glide, but it decelerates rapidly.
View 19 Replies
What is causing the right front wheel bearing to keep going bad on my 06 f-150 2 wheel drive....
View 1 Replies
Once winter arrived I started having problems with my truck running like crap after warm up. However, I noted that during initial start up and lasting till the engine got to its Normal Operating Temp, it would run like a BAOH! Once the engine reached Normal Temp, it would fall flat on its face if I got into it down the road. I wasn't getting any codes, so knowing about the EPU and timing; I opted to change out the O2 sensors. Bought all 4 sensors, Bosh, installed them and within a day got a P0420, P0303; known as Cat system efficiency below threshold and a #3 misfire. (side not all plugs, timing chains, COP's, Phasers, cam positioning sensors have been replaced within the past 18 months) So I decided to take the COP off of the #3 cyl and swapped it with the #5 cylinder; still getting a misfire on #3.
Didn't pull the plugs, knowing they have less than 50,000 miles on them. The problem lasted about a week, off and on with heavy acceleration. Then last Saturday I was driving around town, came to a stop light and the engine shook hard while stopped, missing for a few seconds but not sending a code. Upon acceleration I noticed a loud ticking coming from the right (passenger) bank. The truck practically fell on its face through 3,000 rpm's. No power, and still no codes. I got home, pulled out my steth and listened. I got a loud ticking on the cover at the #3 and #4 Cyl. I know ya'll acclaim ticking to the phasers but it's a totally different sound. Its not coming from the front of the cover as it did when my phasers went out. This is strictly confined to #3 and #4. Took it to FMC., for diagnostic fee and a day later they said, symptoms of lash adjusters. I told them I'd pick up my truck.
Got in it, and drove it home and that noise is loud, echoing through the right exhaust. Seems to be running very rich, still no power what so ever and now I pull up in my driveway and instantly get these codes. P0316 (misfire on startup), P0420 Cat efficiency below threshold, and p1000 (due to resetting my computer back to stock before taking it to FMC) I thought about doing the job myself, but working 120 hours a week I don't see how, and I'll need to buy the valve spring compressor and timing chain wedge (260.00 set) So I started calling around to mechanics, 10 to be exact, none of which, will even look at the truck.
View 1 Replies
Hear a small pop in the cab when I am turning left pulled left wheel everything looks fine. Ball mount maybe, I don't want to tear into it at this point.
View 5 Replies
I have a 2004 2WD supercab. And am hearing a 'clunking' sound when I turn almost full-lock. Below is a summary of what I have experienced so far:
- My truck used to be lowered 2" (below stock) at the front since new. Last month I lifted it (front and rear) and it now sits 2" above stock on new rancho shocks.
- I installed a camber kit and had the front aligned (toe and camber) after the above suspension work.
- The truck drove beautifully for two weeks until one day a 'clunking' sound was heard from the front-left every time I turned left. The alignment also changed as I had to now hold the steering very slightly to the left to drive straight.
- The alignment shop re-did the toe tracking (the camber did not change) and the truck drove great for about a day. Now I can hear the same clunking sound when I turn right and the tracking is again screwed up meaning I need to hold the steering very slightly to the right to drive straight.
What parts are playing up and what may need replacing?
View 2 Replies
Two weeks ago my front left wheel would start shaking like hell when I brake, not at first but after say may eight miles of driving. I have never been in a vehicle shaking so violently and after proceeding from a stop it would continue until it cooled down. I tore out the caliper and made sure everything was clean and lubed and also to make sure I did not put the pads on wrong. Fast forward one commute and the same crap. I could not go faster than 45 mph without feeling like it was going to disintegrate.
When I got home the damn thing was smoking. I managed to get it to the dealership this afternoon and two hours later the guy told me that the guides just needed some cleaning and grease. They did not want to charge me anything (draw your own conclusion) for it. I was told they drove it up/down hills and it was alright. I left kind of suspicious and four miles later the problem revealed itself again. My next thought it maybe axle end play, bad bearings or joints? Intermittent why? 2004 f150 lariat 4x4 ....
View 4 Replies
I have a 2006 F150 and the left rear turn signal and brake light has quit working. Also the license plate lights do not work. The cruise will disconnect when signalling a left turn. I have checked fuses and bulbs and the wiring/connector at the multifunction switch with no luck.
View 2 Replies
My trailer left turn signal and brake light stopped working. The running lights work on the trailer. The lights all work on the truck. I am hooked up to a 2007 F150 and it all worked 'yesterday.' not sure where to start.
View 6 Replies
My wife just bought her first truck, a 2008 F150 about a month ago. We have been driving it around since then and love the truck. The only real problem that I have seemed to encounter on the truck is a squeak coming from the front left wheel area. I can hear it when I cut the steering wheel and when I hit a big bump/pothole in the road. My dad and I have looked into it and he thinks that it is probably the axle joint where it goes into the steering knuckle/spindle. If it is this axle joint, is there a way to service/grease it and go on, or will it just simply need a new axle shaft?
View 1 Replies
2010 F-150 King Ranch. Randomly when turning left, it feels like the left front brake is engaging and it sounds like your anti-lock brakes when you come to a stop on slush or snow. The truck slows with your foot still on the gas, Saturday it came to a complete stop before it released.
I have had it to 2 Ford dealerships, the first could not get the symptom to occur on a test drive and told me there was nothing they could do because they did not now what to look at.
The dealer I bought it from got it to act up, replaced the IWE 2 weeks ago and 3 days later was still doing same thing. My wife dropped the truck at the dealer again Weds.morning, she told them it did it on the way there. I called at 4:30 to check and they said they drove it 2 times and it did not act up.
View 2 Replies
The park brake light stays on brake fluid level is good park brake is not on park brake switch is ok will sometimes go out but always comes back on .My son and one of my buddys also have a 2005 and have the same problem....
View 6 Replies
2005 FX4 truck. Doesn't click when going straight, but if turning wheel like turning into or out of a parking spot, it makes a clicking noise that gets faster as you get faster. It sounds almost like a baseball card in a bicycle spoke honestly. Don't know if its related, but about 3 months before i noticed the sound I had the Rancho quick lift struts installed on the truck. Somebody told me it could be wheel bearings but in my experience a wheel bearing will make a roaring noise, and it would roar while going straight down the road. This is only when turning the wheels. Also, it doesn't matter if you turn left or right, you can hear it both directions.
View 6 Replies
I have a 2005 f150 and it will not engage the front hubs. It is a manual shift on the fly not electric. I have done some checking and this is what i have found so far. Pull the lever into 4H, dash light comes on, IWE's do not lock onto axle. Same for 4L. The transfer case does come in when lever is pulled into either 4H or 4L. Front end up on jack stands, engine off. Turn either wheel and axle turns with it as it should. Start engine, turn either wheel and it is free from axle, as it should be. so there is vacuum going to IWE when engine is on. Not sure what to check next. Is the vacuum solenoid on the firewall bad?? Is there something not getting activated when i pull the floor lever back?
View 4 Replies
