I added plow lights to my truck and something quit when I had the high beams all on at once. All 4 shut off. Low beams still working. What I fried or where to check? Its a 99 F250 superduty.
View 14 RepliesSo I recently bought a 1997 7.3l F250. It is in fairly good condition, but it has some problems with the lights working. The turn signals and hazards all work, as do the tail lights and headlights. However, when I hit the high beam switch, the headlights cut off entirely. Also, the brake lights do not work at all. Ive checked the bulbs and since they all work Im not sure what the issue is.
View 3 RepliesMy car is fully stock, with all options available to me (cold weather package not available here). The low-beam triple-LED headlights are aimed way too low compared to all my previous cars, and where they should be. BUT high-beam is aimed properly. So if I adjust the low-beams up, my high-beams might end up lighting up the trees, not the road.
If adjust the headlights up on a fully stock car (not lowered at the front)? Are the high beams still lighting up the road fine? And if you can be specific as the number of turns on the screwdriver, it'd be good too to have an initial adjustment reference.
This morning a dash light informed me a headlight bulb was out. It was my DTR light on the passenger side.
I purchased Sylvania H7 high intensity, installed it and it failed to work properly. Daytime light on only drivers side works.
High Beam on , both lights works.
I checked my manual and it said to check fuse in the 5 slot on the driver side dash/door panel and there actually is no fuse in there. I checked the driver side and there was no fuse there either.
I replaced my driver side bulb last year and it took 5 mins....i am already 4 hours into this!
Well now I have to replace the multi function switch due to moving my steering wheel and the headlights sometimes working and turning signals not working. I saw a great video on youtube about changing a Multi Function Switch and it shows where the air bag needs to be removed. I was hoping that since my truck is an older 1997 F250 LD I wouldn't have to remove the airbag. Is there a way to do this w/out messing with the airbag on the 1997?
View 1 RepliesI have a 1995 ranger four letre 5sp, dubbed Beula. I figured there'd be a few gremlins and there was and is, which I know to be more common than not in older trucks. The top priority is figuring out why when I push the lever for the high beams forward, the headlights cut out completely, whether in gear or not, and I don't know where to begin troubleshooting. I've surfed around the forums looking for answers and really only found conjecture.
View 14 RepliesLast week I smelled something burning when I arrived home. I looked around the car and did not see any smoke. I noticed the other night that I had no headlights (low or hi beam) The fog light work fine. No fuses are out.
View 2 Replies08 accent passenger headlight was noticed to not be operating while in low beam. Switched to high beam- it works, but still no low beam.
First instinct was replace the bulb. Low beam works but now.. high beam doesn't?? Bulbs are fine, brand new out of the box and driver's side works like a charm. Bright as heck... passenger's side isn't quite as bright If that's any relation to the problem.
Checked the fuses, they're all good. Made sure bulb was placed in secure. Filament didn't get bounced around either. Was poking around online and seems it could be the relay. Manual doesn't seem to list a relay for the headlights or am I not reading it right?
Just discovered that both high beams are not working. Regular lights ok. When switch to high beam both go off. I know some bulbs have two filaments, is this the case for this car? Are the bulbs burnt out or something else is wrong?
This is a 2007 Jeep Wrangler Rubicon Unlimited.
I just bought a 2004 f-250 checked everything out except for the headlights ... when I tried them the didn't work except on flash to pass ... I searched around and found some possible solutions and tried them .... first I checked the bulbs and all the fuss they are good then I bought a headlight switch ....that fixed the problem for about two days then they quit working again... so I took it back and got a new one ... when I first put it the new one in it didn't work then it started working a day or so later and I hadn't done anything to make it work... then a couple days later it went out again ... I have swapped the switch out several times and have had no luck I replaced the multi function switch and still no low beams ...
All the fuses are still good I have checked the wiring visually as much as I can see and see nothing... buddy of mine checked the pins on the headlight switch connector they are all good .. Read something last night about a guy whos alternator was going bad and caused his not to work checked mine its putting out around 13.4 at idle .. is there a relay somewhere ... my book doesn't show the function of any of the relays so I don't know ...not a mechanic but a pretty decent parts changer. Trying to fix this myself . Next week have to take the truck to pull the camper ..
When my gas light comes on during the day my horn blows every couple minutes at night time the headlights go from high-beam to low-beam every couple minutes. Also, my check engine light is on more than it is off
View 4 RepliesI have a 2008 Prius 2 that has suddenly developed a problem with the headlights. The lights will function on high but will not work on low. Are they hid? I have checked the fuses and relay. Really at a loss here. Not really wanting to spend a fortune at the dealership.
View 3 RepliesI have a 2002 Camry. The low beam headlights stopped working last night. All the other lights work. High beam, driving lights, marker/park lights. I checked all the fuses. I changed the headlight relay. Still nothing. Could it be the headlight switch on the steering column? Trying to do more research before I replace it.
View 2 RepliesSo I have MFD display errors for "main beam not working" on both sides but both of my headlights, lows and highs both work fine. this has been like this for a few months now. I can clear the codes with my VAGCOM and after a day or two they come right back. I do have LED license plate lights but for at least a year i only got the error code on startup for the plate lights but never headlights. A little confused as to what is tripping the headlight codes
View 3 RepliesI have a 2006 Buick LaCrosse. The low beam headlights have stopped working. I thought that maybe the bulbs needed changed (since I usually have to change them every 6 months) but after changing one with a brand new bulb, it still doesn't work. The "old" bulb looks ok. The fuses are also good (I checked them with a multimeter.) The only thing that I see in my shop manual is something about the ambient light sensor. If this has gone bad, would that cause the low beams to not work? The high beams work fine. The low beams will not work with the headlight switch in the "auto" or "on" position. I don't see any DRL relay or fuse in this car.
View 17 RepliesLow beams don't work. The fuses are fine (under the dash, and in the engine compartment) and the bulbs look good. The fact that both went out at the same time has me wondering. One post on this forum for something not related mentioned a headlight relay behind the fuse panel?
View 9 RepliesThe low beam headlights on my 2007 Pontiac Torrent have been working intermittently for several months. Sometimes they will automatically turn on like they are supposed to, other times they will not and I will try to manually turn them on- sometimes it works, other times I have to use the high beams. I had the lever replaced, but it did not fix the problem. My boyfriend tried to track down the problem and removed the fuse panel completely from the car, didn't see anything that stood out, so he put the right back. After he put it back, the car would not start.
The radio works, the interior lights work, but when you try to turn it over nothing happens. At all. I towed it to the mechanic a week ago on Monday and they said that it smelled like burnt electrical under the hood, but could not pinpoint the problem. They have now had my car for a week and the latest update they have given me was the car will not communicate with their testing equipment, so they think it is the computer, but they are not sure. They said that they are trying to find a replacement computer.
Does this sound like a computer problem? And if so, should it have taken them an entire week to try to diagnose? I am trying to be patient, but it feels like a week is a long time to have a car in the shop and I am still without a definite diagnosis or any estimation on how much it is going to cost to fix my car. Should I try to take it somewhere else?
Both low beams of my 2004 Odyssey headlights stopped working today. Both high beams are still working. From what I read and observe, the same bulbs serve both high and low beams on 2004 Odyssey. In other words, there are no separate low- and high-beam bulbs. What the problem might be? And is it fairly easy to fix myself?
View 13 Replies2009 VW Jetta TDI... Both low beam/running headlights are not working. I tried to check the fuses but, according to my owners manual both left and right fuse slots are empty. I don't think both fuses fell out. Where the headlight fuses are supposed to be?
View 2 RepliesThe high beam indicator on the instrument panel stopped working. It does illuminate but is extremely dim. I changed the bulb, its one of those tiny little bulbs but that didn't work. I cleaned the connection areas where the bulb holder clicks into the back of the panel with scotchbrite, no luck.
I checked for voltage, this is where it gets interesting. I measured 6 volts. The other side is presumably ground, but my meter went a little crazy when I checked for ground, like it sensed voltage, but there is no voltage. This could be a bad ground, but where is the ground located? Buried somewhere under all those plastic panels, I suppose. And why only 6 volts? Is there some electronic control somewhere? The Chilton manual wire diagram just shows a hyper simple circuit from the high beam lights, through the indicator lamp, then to ground.
I DID replace the check engine light bulb and that works now (sarcastic hurray!). I have never seen it come on, the previous owner must have let it burn out, but the truck is in pretty decent shape for its year.
2011 f350 king ranch... I have DRL, turn signals and tail lights. I have checked all fuses ( don't know if there's a relay) under hood and in cab. Still do not have any headlights, high or low beam nor do I have any fog Lights.
View 5 Replies