Ford F-150 - 1997-2003 :: Fog Lights To Come On With Just Park Lights?
Apr 29, 2015
Is there a way to be able to make the fog lights come on with just the park lights? Like a aftermarket switch or anything?
View 9 RepliesIs there a way to be able to make the fog lights come on with just the park lights? Like a aftermarket switch or anything?
View 9 Replies99 F-150 V-6, 125,000 miles: I repaired the odometer connection on the cluster mother board! It now works great but now have no running (parking) lights and no backlights for the instrument cluster. I think (!) they were working before I pulled the cluster to fix the odometer--not sure. Fuzes are all good--I metered each with ohmmeter for continuity, and also have 12V to the right fuzes with headlite switch in Park and Head. I replaced the headlight switch with a new one but still the same problem. Have I messed up something in the cluster board or connections by soldering there? I don't know what role the cluster plays in feeding the running lites or the cluster backup lites. Stumped. What am I missing?
View 3 RepliesA couple times recently, I've been unable to shift my truck out of Park & the brake lights don't work.
After checking the related fuses & finding them to be ok, it all works again.
What might be causing this to happen?
My passenger side front signal light works properly, but when I turn my hazard lights on it will not blink normally (the other 3 blink). Inside my truck when looking at my dash I see the small green blinking arrow for the left signal, but not for the right when the hazards are on. When using the signal normally, I see the small blinking green arrow for the right signal though.
1997 F150 Supercab, 4.6L V8
I've got a 2001 f150 supercrew 4x4 with the 4.6. I plugged in trailer lights and now I have no brake, turn signal, or hazard lights. I've checked fuses and none are blown.
View 8 RepliesDaughters 03 mountaineer. Have changed the brake light switch, bulbs and checked the only fuse I could find for the brake lights. She can drive it by doing the override under the column but still has no brake lights and is an accident waiting to happen. What else to check? Is there a relay or another fuse I could be missing? I'm lost.
View 8 RepliesWe have a 97 Dodge Ram and the park and dash lights have quit working. We have tried four new(not factory) switches with the same result - no lights. What else should we try?
View 5 RepliesI have noticed that I have to hold my gear selector towards park to get the reverse lights to come on. Also some times I have to hold it towards park to get it to start. I changed my tranny in Dec 2009 and occasionally it would do this while starting, just noticed the reverse lights about a week ago. Tried moving the cable where it attaches to the tranny a couple of serrations each direction. No luck. Is there another place I can make an adjustment?
View 14 RepliesAbout a month ago I discovered one of my reverse lights was out on my 97 f150. So first thing I did was replace the bulbs then they both went out. So with my test light I checked the fuse and all sockets. All good there. Then I suspected the switch. So I bought a new switch. Nothing. Then checked the connector with the test light. Thought I found my problem there. So I bought a new connector and when I connect the wires, they only flick on once. Not even for a full second. I hear a click and I'm told the lights flick on once and that's it.
View 1 RepliesGot in my truck this morning and noticed the service engine light, oil light and gas cause were all still on. It also had little dashes in the odometer box. The seatbelt alarm goes off as well. What is going on?
View 10 Replies97 ford f250LD. Oil and fuel lights come on for a second. Randomly. No certain conditions. Respective gauges are not affected. And no performance impact. I am stumped. Looking into the GEM module now.
View 6 RepliesI have a 98 f150 that I don't drive often. I had it out tonight and realized the my brake lights wouldn't come on unless I pressed the peddle down hard. Does the switch work off of pressure? They used to come on as soon as I would touch the peddle.
View 14 RepliesI was driving home and the dash lights went out. I checked all of the fuses and they all check good.
View 14 Replies My F150 is my first vehicle, although I cannot drive yet I am already starting to make it my own.
I want to do an LED upgrade, I already have the dome/map and door lights done. I went with red door lights and a red dome light with everything else white. I bought these lights cheap off of ebay so I have quite a few now.
I was wondering how do you get the glove box light out? I can not get my fingers in there or a pair of pliers.
Also the cup holder light, mine does not come out in one of the actual spaces for a cup, it is in between them covered by the plastic center, is there something to remove to get light to come trough?
I have a 2003 Supercrew that does not have daytime running lights/automatic lights. However, when I start my truck, there's about a 2-5 second delay, I hear a relay click and my headlights come on even when the lights are switched to off. I pulled the dash apart. There is no sensor, relay or anything. Looked under the hood, there's no hint of anything for auto headlights or daytime running lights. I don't really care too much that the lights come on by themselves, especially in broad daylight. Can I get some leads on what to chase down in order to get these lights to stop coming on automatically?
View 10 RepliesJust tried to engage my 4x4 today to see if it was working and nothing. It is the electronic shift on the fly. I started checking the vacuum hoses and found one that looked like a mouse chewed threw part of it and repaired that line. Still no 4x4. So...there are no lights coming on, no sound from the transfer case shift motor and no noise of any kind when cycling the shift ....
I pulled the connection apart at the shift motor to test for voltage with 2hi and truck running and no 12volt. I tested all the pins but not sure if i did it correctly. Also the shift motor itself is rusty on the outside casing. What pin to test for voltage?
I noticed that my break lights are not working. Checked the fuses . The break light on the cab works fine. The blinkers and emergency flasher work great. i checked the bulbs and nothing wrong there. Truck runs and drives great. But no break lights.
View 7 RepliesMy dash lights and hvac lights don't work my brights indicator and check brakes lights are on so I think there's power going to it. I checked all the fuses and replaced the dimmer switch and checked all of the wires in and around the cluster. All bulbs are new and checked. I don't know what to do now and I couldn't find another post that had something i missed. 1997 5.8l F250 ....
View 7 RepliesJust got this truck, and found out i have some kind of issue. At night I can't see the dash because the dash lights don't work. I have checked all fuses and they are good. I did find this plug, and I'm wondering if it may be the cause of my dash not lighting up.
View 3 RepliesChecked fuses, still can't find short or reason I don't have running lights. Which fuse the running lights operate on, maybe I can trace it backwards from fuse box.
View 1 RepliesI have an automatic 5.4L (L code) 2000 Ford F-150 and I am having problems with the reverse lights not working when I place the transmission in reverse. Fuse #5 in the passenger compartment fuse panel is good and both reverse lamps are good as well. I have also metered the LB/PK input wire at DTR sensor and it is reading 12 volts when the ignition is in the on position. I have also the metered the BK/PK wire output wire at the DTR and this wire also reads 12 volts when I place the transmission in reverse. I have checked continuity from the BK/PK wire at DTR to the BK/PK wire at the reverse lamp socket and I do not have continuity. I then ran a fused jumper wire from the BK/PK wire directly to the BK/PK wire at the reverse lamp socket and the lamps will light up when I place the transmission in reverse and will also turn off when the transmission is placed back in park. So it seems that the DTR is not defective. I'm not sure what else to check. Obviously the BK/PK circuit is open at some point between the DTR and the reverse lamp socket, but I'm wondering if there is something else that I need to check. The vehicle is also equipped with a factory trailer tow package
View 3 Replies