I bought the truck from the original owner, its a true to life cream puff. Fully loaded. What I don't like is the doors lock automatically when I start driving. I want to disable that feature. Any way to accomplish this? 2002 Supercrew XLT lariat....
View 3 Replies2003 supercrew. Could this be because of a switch, fuse, etc?
View 3 RepliesI have a 2002 f150 supercrew, 4wd. The power door locks stopped working the other day and I am trying to fix it. So far I have checked the fuse in the power distribution box, good. I have checked the wires from the doors to the cab along the door sills to the rear doors , all good. I did find a couple of iffy grounds on the left kick panel and cleaned and repaired them. I am having a heck of a time finding the group of relays that control the lock and unlock functions. Remember , I have no power lock function at all. I would swear its not getting power to the relays but until I find them , I just don't know. Where they are supposed to be?
View 5 RepliesIs there a programming sequence that will keep my 2002 Camry from locking all doors when the vehicle is put in drive/reverse. I realize this is considered a safety feature but I prefer to lock them myself.
View 10 RepliesI tried the methods that I could find on youtube but with no luck.... I do not have the option to change the settings in the message center either...
View 14 RepliesLast week my door locks just stopped working so I checked all the fuses and relays which all were good but still no power took door panels off and checked with tester and no power to switches or actuators, Checked wiring in between door and cab and no broken or bare wires. This truck does have remotes and they don't work either, what's going on ?
View 2 RepliesI have a 2003 ford f150 supercrew. The problems that I am having is first, my door locks will unlock just fine on the key fob and on the door switch inside the cab but they will not lock at all. I've checked the fuses and everything and cant find the problem. it did this one other time then one day there was a pop from in the dash and they started working.
The second issue that I am having is my 4x4 doesn't work all the time. i turn the switch on the dash and the 4x4 light comes on and i can hear a click but then i have nothing so I took it to my mechanic and he said it was probably the shift fork but he wouldn't know til he took it apart. so i decided to hold off then the 4x4 worked fine for a couple weeks if it was my shift fork would my 4x4 still work sometimes? could these problems be related?
2003 f-150 Supercrew 4x4 ... I have no power to my windows door locks, power seat, mirrors a/c, anything is the a module that controls all of that stuff? Where is it?
View 2 RepliesI have a 2001 F150 2 door 2wd 5.4 engine. When I put it in gear the automatic door locks do not activate. The procedure for programming the remote does not work either. It calls for turning the ignition switch on and off 9 times, and the doors should unlock, so that procedure does not work either.
I took it to the dealer to have the BCM reprogrammed, they say there is no BCM in the vehicle. The codes they got says there is a door ajar, and the interior lamp relay DTC. I am not sure what the DTC means, forgot to ask.
The door warning light goes out when the doors are closed, and the interior light goes out. They do not seem to know how the system operates. I bought the wiring diagram.
From what I can see, closed lock switch connects directly to the GEM. The dealer told me there is two switches in the door. There is only one as far as I can determine. Ther are two plugs on the locking mechanism, on is for the remote lock, it works. So the lock closed switch is also working.
Reading this forum, I see several cases where people have changed the GEM, and that did not fix the problem. I can not see any other solution, as the door closed switch connects directly to the GEM, and the door open warning goes out, and the interior light goes out.
Anything else that could cause reverse to go out of an automatic tranny other than the tranny being shot? I don't know of anything but any way to keep me from replacing a tranny.
View 2 RepliesI just bought a 2000 super duty F250 Triton V10 and the auto door locks don't work. They try to work as in tug an eighth of an inch but won't successfully engage or disengage. Thought it might just be the switch inside the door handle but they don't work on the passenger side etc either.
Also two days after I bought it I found out first hand that these motors spit out spark plugs and i had to replace the plug and coil. I was told that there is a tool that I can tap out the heads with and then put inserts in so i no longer have this problem. Where do i get that tool and how much are they? Is it true that pulling the plugs can strip out the heads because i bought all new plugs for the truck and was then told that it will strip out the heads.
How many quarts of oil does this engine hold and should i use a certain type of oil? It has high miles but purrrr'ss like a kitten.
The doors & trunk will auto lock @10mph and will not auto unlock when car is stopped. This is very inconvenient. When I buy groceries then try to open the trunk when I get home, I always have to unlock the trunk before I can open it.
My dealer told me they cannot reprogram it. The older model has an option on the MFC but not ours.
I have a 2002 F150 FX4 Lariat, and last week while driving at night with the light switch turned to auto lamp the lights suddenly started turning on and off rapidly and there was a clicking noise, which I assume was a relay cutting out. I turned the headlamp switch to the on position and the lights stayed on. When I got home the lights would not turn off, and when I turned it to autolamp the blinking started again, but in any other position the lights stayed on. I had to unhook the battery. I then purchased a new headlamp switch and my ford mechanic buddy installed it, but now the autolamp feature will not work. Is there a relay that may have got cooked?
View 1 RepliesIssue on 2000 Passat where the auto door locks lock when you start to drive, then out of the blue, one or more will pop back up. Sometimes one will just pop back up at the next stop sign when stopping, then go back down again when starting.
View 3 RepliesIs there an easy way to do this...???
View 2 RepliesIs it possible to reset or shut off the auto door locks?
When I use my use my factory remote to unlock the doors it usually locks itself within one second. If it don't time it right I'm pressing that button repeatedly trying to open the door. This is such a pain and it's annoying. Sometimes when I go to open the door so that I can exit the vehicle it locks itself midway me opening the door so that I'm stuck.
I called the dealer and shocker they want me to come in so that I can get screwed. There must be a way to just reset or reprogram this.
I have searched I have seen threads concerning the locking when you shift out of park. I am asking about just locking and unlocking the car.
I have 2006 Elantra GLS. It has power door locks. But when I start driving the auto door lock does not work. Is there a way to check if this model has auto door lock or not. or How to enable auto door locking.
View 1 RepliesHow to disable the auto door locks but I have the opposite problem. Mine were not enabled and I would like them to be. Looking for instructions for enabling the auto door locks? 2010 s, no smart key, manual transmission.
View 14 RepliesVehicle: 2002 f250 xlt 7.3 powerstroke reg. Cab
Issue: door ajar light stays on, power locks on driver and passenger door don't work, radio stays on after truck is off an door is opened.
Events leading up to issue: went to temporarily hook up a wolo dixie horn to see if it worked. Wanted to do it fast so I took + cable, tied one end to the battery terminal and then connected other end to dixie horn relay. I then grounded both negative wires to the truck. One ground on the frame the other I temporarily wrapped around a one of factory ground mounts under the dash. Immediately after doing this the problems stated above started.
How can I fix this. I need to fix this by tomorrow. I have a guy from Craigslist coming to look at the truck. Now the 4x4 issue.
Truck has zf6 manual and the electric 4wd select ****. Just thought I'd list this if it was needed to be known for solutions.
4x4 high light stays on in while 2wd all the time. 4 low will stay on after switching back to 4 high and 2wd but it goes out if I ether stop the truck shut it off then restart it. or back up and slam on the brakes. Also when in 4 high the front driveshaft won't spin. However It will spin when in 4 low.
Another random issue I'd thought I'd just list while I'm writing this.... Cruise control does not work. And when I press the "on" button and the "coast" button at the same time the horn honks.
I have an '02 X. I have re-programmed the seat belt alarm setting per the owners manual and set the "lights on after ignition off" to suit my needs.
The one thing that is driving me nuts though is that when I turn the ignition off and get out only the driver's door is unlocked. I want ALL locks to unlock. I haven't seen anything in the manual about this. How to re-program the locks so that they all unlock when the ignition is switched off?
I've put put about 2000 miles on the X now, towing my 5000lb trailer, mild offroading and running around town. It sure puts a smile on my face!
I have a 2002 excursion xlt 4x4 v10
The door locks quit working. The previous owner did the tin foil repair... I replaced the four door actuators today. Now all of the doors lock and unlock on the manual buttons. The fob doesn't work on any door.. when i try and use the door code pad, the locks go into a cycle.. the keep trying to operate by themselves. I had to disconnect the battery to get it to stop. I can't find the door lock relays. I have most of the dash out. Where these are?