I have a 2001 5.4 V8 with 55K miles and the tow package. On acceleration the engine makes a ticking noise. Engine seems to run fine, no misfire.
View 14 RepliesAbout a week ago my 1997 F150 4.6L 2WD starting a ticking noise. I had used high mileage full synthetic Mobil 1 and a Motorcraft oil filter for the previous oil change and yesterday had another oil change using regular Mobil 1 synthetic and a Motorcraft oil filter. Had never used high mileage oil before.
Since the high mileage oil is supposed to have extra cleaning agents in it to remove the sludge buildup in the engine, could the sludge have found its way into the oil pan and possibly clogged up the oil pickup tube? The ticking was not continuous and would be at idle or acceleration.
No rhyme or reason to when you would hear it. I also wonder about an exhaust manifold leak which could sound like ticking. If the problem is an oil pickup tube being clogged up, can the oil pan be removed with the engine still in the truck?
I have a 98 F150 Supercab 4x4 with 4.6 and an auto trans. I have 107,000 miles on the truck. Recently developed a engine "tick". Upon start up the "tick" is very noticeable. Seems to go away after its been driven a few miles and everything comes up to operating temp. I have checked the exhaust manifolds, all studs and nuts are still there. There are no noticeable holes that I could feel in the manifolds. Read some other posts here that have the "tick under load". Mine goes away once everything warms up. What to look at or for?
View 8 RepliesI've got a 2003 f150 with the 5.4 and 128,000 miles with an engine tick. Its not an exhaust leak I know that for sure. It has came up in the last 20,000 miles. I've used motorcraft 5 20 w/ motorcraft filter. I've tried a kreen engine treatment with no change. Heres the description/syptoms:
-Slight clatter for 2-3 seconds upon cold startup (happens very rarely)
-top end ticking that is loudest and most noticable when warm (quieter when motors cold)
-not timing chains/tensioners etc because the noise is coming from the top end and most noticeable on the passenger side.
-at idle the tick is present-when you rev at idle, the noise goes away.
-Driving (or having the engine under any load for that matter) the noise gets louder.
-Anytime I accelerate, tow/haul, go up an incline the noise gets worse
-Sounds like a "whirring" sound from within the dash.
With all that said I am thinking the lash adjusters are getting noisy. I had a certified gm tech that has 40 yrs mechanic experience under his belt and builds prostreet muscle cars on the side look at it. He listened to it to it and that was his diagnosis as well as its not that bad so just live with it. The noise at idle doesn't bother me, its when im driving with the windows down. The noise drives me crazy and is a little annoying to me.
Heres a link to a video of the sound and keep in mind it is much louder now : Triton engine noise/tick - YouTube
2003 Santa Fe with the 2.7l v6. It started making ticking noises from the engine bay about a year ago it sounds almost like when you take a spark plug out of the socket while engine is running (that’s the best way I can describe it).
It used to only do it when it was cold out and first started. Then it started doing it while at idle as well. Now it does it all the time no matter idle, or how warm the engine is or how warm it is outside. It getting so loud it sounds like I have a diesel engine.
The check engine light came on and was on a for a while before I could find the issue. The issue that caused the CEl to come on was a solenoid and an Air intake temp sensor. I fixed those but that had no effect on the noise. I have replaced all the valve gaskets, plugs, wires, pcv valve air filter. Still had no effect.
My wife took it to a mechanic who I believe ripped us off, and did no work but charged her for it. They did a timing belt and lower valve gasket job 1500$. There was no sticker to prove new timing belt, no new water pump, thermostat, and then they said it needed a new ECU (200$) which they ordered it and it had nothing to do with the ecu. They should have eaten the cost once they put it in and found it wasn’t that, but they did not!!! She has no idea about cars and paid them. but don’t get me started on that I will never return to that shop, and am thinking of taking them to small claims court dishonest thieves who took advantage of her not knowing about cars (I was out of state for work, and was out of cell phone range so she couldn’t have asked me).
It has a hard time going up steep inclines and you have to either gun it before the incline or it is very hard to make it up you can put the peddle to the floor and it only slowly climes but the engine rpms almost go to redline 5k rpms. Whenever I go to put gas in it clicks the pump off nonstop and to fill the tank you literally have to find a sweet spot or stand there and constantly hold it in when it clicks and clicks and clicks. I have changed the oil to synthetic, and I am using only OEM oil filters from the dealer ship. I changed the idler pulley, but that did not work. I changed the Oil and filter, but that did not work either.
I have had multiple people look at it and some of the answers they have said were…. “Noisy lifters”, “ticking idler pulley”, “Sticky timing chain idler”, “Change the oil and switch to oem filter”, “Its defiantly “something wrong in the fuel system”. And the best one… “I don’t know it sounds like it’s not long for this world”.
So now I am trying to decide the next step. I don’t like driving it around to much as I am worried if it is serous it may be something that ends up running the engine, but it’s the only vehicle available at the moment. I feel like hitting my head on the dash board I don’t know what to do anymore.
Link to photobucket video of noise : [URL] .....
So on a cold start I keep hearing this ticking noise. Not every time, but more often than not.
I have two thoughts:
1) Low oil pressure causing timing chain tensioners to allow slack in the timing chain. Oil pressure builds up after about 1 minute of driving.
2) Oil Restricter in the valve cover starving one side of the valve cover?
Replaced head gaskets on 2003 f-150 5.4. Now I can hear a ticking noise in middle of intake by #5 port. Maybe timing is off 1 link?
View 4 Replies2013 Elantra manual. 60,xxxkm, owned from new, purchased in August 2013. Oil changes always done within 5-7000km. Was 2000km over my oil change due date when this happened (haven't had time to get it done, been driving my motorcycle mostly). Driving around today I dropped my wife off, then I heard a quiet ticking noise under very light acceleration.
The noise would go away under normal acceleration, no noise while revving, and no noise while engine braking. The noise got worse after about 5km. I was in traffic and engaged the clutch into first gear, the car stalled violently. Turning the key results in a click, then nothing. In 1st gear the car will not roll forward. In reverse the car will not roll back. It still rolls in neutral. Had it towed to my local Hyundai dealer and got a rental. Waiting on the results.
Never saw a drop of oil on the ground while parked, and never smelt any oil burning. I run between 87 and 91 octane, whichever is available. I have the extended 160,000km 8yr warranty, hopefully this is covered as I still owe about 15g's on the car.
I'm wondering what is going on with my 2001 F-150's 5.4L Triton engine. Recently it's been making this noise that I can best describe as a "rattle" from the passenger side of the engine. It's not a constant rattle, it comes and goes every few seconds.
It sounds like it's either from the valve cover or timing cover, so I was thinking maybe it's the feared Cam Phaser failure, however the noise doesn't seem to match what I've heard from other videos of confirmed Cam Phaser failures.
I've attached a link to a video of the noise that I made. It also has a lifter tap from the opposite side of the engine that may be noticeable in the video. It has been present since I bought the truck two years ago, it hasn't gotten any worse and it isn't what I'm concerned about.
Video link : [URL] ....
I have a 2001 F150 4x4 4.6L Auto trans. 96,000 miles... I purchased it in Jan with 93,000. About a month ago it started making and occasional knocking noise coming from the engine, this noise was heard at idle in park and in drive. when I revved the motor it would go away but as the idle settle back down you could hear it again. the noise would go away as I was driving and come back with no rhyme or reason, I put a stethoscope on the engine and it seemed loudest under the oil pan. The oil gauge is up between 5/8 to 3/4. Fast forward to now, When I start it I hear a scraping almost grinding noise that resonated thru the cab it has the same intermittent characteristics. I think I am going to remove the serp belt, remove the trans inspection cover next and see what happens. Oh I did put a scan too on it, no codes but did notice 1 long term 02 sensor trim was staying around -.618 if I remember.
View 11 RepliesNeed some input on miss firing on acceleration on a 2001 Ford SuperCrew F-150 Lariat, 5.4 engine. 200,290 miles.
Have replaced all spark plug boots covers (Sept 2012), number 1 plug (Sept 2012), 3 and 7 plugs replaced, 3 and 7 has heli-coil kits (2011) installed for blown out plugs. New in-take manifold (2010). New gas line filter, air and oil filters (Oct 2012) and oil changes every 3000 to 3500 miles. Have poured 12 oz. fuel injector cleaner in gas take two times with 6 to 7 gallons of fuel in gas tank (last 2 weeks).
Have No check engine light on for service engine but have had an diagnostic scanner analyzer plugged into driver side, in cab outlet, 4 different times to see if I have a bad coil on plug or other problems. No codes show up indicating any problems. The engine idles nicely when at stop lights but does have a slight intermittent miss at times when warmed up and stopped at lights. Engine misses when warmed up on acceleration (when it is under a load and on acceleration).
Had a mechanic tell me he could plug an analyzer into engine but couldn't guarantee he would find anything wrong. This sounded like a little snow in July to me and the mechanic didn't sound optimistic.
When I first bought my 2001 f150 a few mos ago there were no problems but I did notice once in a while it would give one little shudder when id accelerate. now all the sudden it shudders after around 20 mph all the way up to whatever the speed limit is. Then it smooths right out until I have to accelerate again. if I punch the gas and kick it down it will clear up but then it feels more like a surging going on.
I had the cruise set at 70 the other day and I had to slow down to merge to around 50 and when I hit resume it really started shaking bad and the service engine soon light flashed on and off for a few minutes then went off and hasn't came back on again. I took it to advance auto and no codes showed up. they said its probably the torque converter but after reading multiple forums I am not so sure now.
My wife is talking to someone about purchasing a 1998 4.6 4x4 EB Expedition. The owner says the only issue is a tick coming from the driver's side head. He claims the shop told him it was "just a cam stator". Now, say what you will, but I've dabbled just enough with mod motors (2v and 3v, 4.6's and 5.4's) to feel like I'd rather stick to old pushrods. I've never heard of a "cam stator" on a 2v 4.6. I also realize that stator is a word that gets tossed around a bit by people who don't fully understand what it is.
Now, this is a relatively high mileage engine (something like 220k I think) so I know it could be a whole slew of things from cracked/leaking exhaust mani, lifters, timing chain, etc. But, in all my searching, "2v 4.6 cam stator" keeps leading me to people troubleshooting pushrod distributors, 3v VVT troubleshooting, and alternator related posts. Is this such a thing, what this shop may have been trying to refer to? He claims it's done it for about 5 years now, and runs perfectly fine. I'm leaning towards lifter, but the truck is 3 hours away so I haven't got to check it out yet....
I have a 2000 F-150 5.4 L. I was driving from home and seconds after the engine went into a rough idle that wouldn't let me accelerate. I scanned it and gave me multiple transmission trouble codes, about 15. I checked the wiring, the transmission fluid and it all looked good. So, what could be the problem?
View 3 RepliesI have a 2001 BMW X5 with some ticking/clicking noises coming from around the engine area and I would like to know what those may be due to. Here are the two videos that I have posted: [URL] .... I have done my homework to look at a bunch of vids online about cars with similar noises and possibilities for the noise are valves, belt, rods, bearings, spark plugs, etc.
View 5 RepliesI have a 2010 Ford F150 Lariat with 111000 miles on it and now I have a ticking noise under acceleration only and after reading some stuff on here that makes me believe that it is the cam phasers. The question I have is what kind of damage can this cause? Is this something that I can continue running with and does the noise get worse and if so how much worse?
View 9 Replies2001-F150 5.4 Eng. bucking/stumble. I think my problem is slightly different than what I am reading about. Here is what I get (125k miles):
* Engine only bucks/stumbles intermittently and not at idle or at harder acceleration (this bucking is really harsh and makes the truck feel like a learner trying to drive a manual transmission and it is jumping down the street). The engine stumble is not a regular timing such as a cylinder going out and staying out for a period of time. It is quite a random pattern to the jumping
* Originally thought it was humidity related, but now I realize it happens in any climate
* No stumble in neutral at any rpm... only at a stop if I put it in a power brake load.
* When the stumble shows up, it seems like the throttle is around 10-25% (my best guess)
* Sometimes goes days without issue, but sometimes every ride and virtually every acceleration.
* Normally no stumbling at highway speeds, unless going up a hill.
* Every time it stumbles, it can be eliminated by either backing off on the accelerator some, or hitting the accelerator harder.
* No engine codes or CEL has ever come on
* Fuel mileage appears to be the same before and after the trouble started
Here is what I have done to try to correct it:
-> Fuel related (bad gas)... tried to run the tank as close to empty and fill it with fuel from different stations... when this didn't work, I have added HEET to it to dry up any water in tank.
-> Fuel delivery... replaced the fuel filter... seemed to work for one day, but then the gremlins came back.
-> Fuel delivery... ran multiple injector cleaners through tanks of gas.
-> Intake... replaced the filter.
-> Electrical... I don't believe this is related, but my battery died... parts store tested the system and stated the alternator was bad... replaced it, and took the old one to the parts store for bench testing and it was 100% OK... even thought the old showed OK, I left in the new one as a precaution. Only other item was a set of plug changes around 30k miles ago... I think I put in the super duper Bosch plugs with a lifetime warranty.
Current thinking and items I don't understand:
A) The bucking is so severe, it appears to be a random harsh loss of either fuel or ignition. A component that has failed electrically should give me a fault code with this level of severity. No trouble codes or indicators to electrically sense this disturbance...
B) For the fuel path, the most likely item is bad gas and I emptied my tank by running it as close to empty as possible and then used different gas and HEET to eliminate water. THIS MIGHT STILL BE THE CAUSE???
C) Another one for the fuel path is an intermittent fuel pump electrical connection or a weak pump from a pressure point. But if this is the cause, then why does it dissappear upon harder acceleration?
D) One last fuel thought is injectors... perhaps one or more have a range of delivery that they don't work properly... but this doesn't make much sense as at idle and harder accels are fine
E) From an ignition standpoint, perhaps I have failing COP's. I have not just gone out an replaced them due to my limited budget and the difficulty I read about changing them. Again, if one of these is failing in an either open or short condition, the computer should set a code for a misfire for the related cylinders. I get nothing. Hence my hesitation in making this change so far.
One thing i don't understand from the various posts is that the cops can fail under loading. what makes this happen as electrically, i don't think they can detect a load or not? it is hard for me to also understand why my truck would allow me to back off on the throttle or hit it harder and the issue disappears.
So I have a ticking sound that has me puzzled. I thought it could be coming from the drivers side of the engine. This weekend, actually on Monday I decided to do the hot re-torque on the diver side. I warm up the engine for about 15min and have at it. I had put this off for weeks because it has been way too hot. Dam it was still too hot, I was sweating buckets. I had to stop several times to clear the sweat off my head my eyes my shades .I torqued everything to spec and nothing moved.
I went to 125 inch lbs and I got movement on the rear two injectors. I gave them about 1/2 a turn and stopped. I put everything back together, I used hair spray form the 99 ct store. It seemed OK. Fast forward to Tue. I needed to be sure so I went for the boost leak test. Here is my concern. I was going to test to about 30 PSIG, but I ended up at about 40 psig and I forgot to disconnect the MAP sensor! How likely is it that I damaged the sensor, and how can I tell? She is pretty stock and does not have a boost fooler to protect the sensor. Nothing popped and I did not leave the the HP on very long.
Oh where do I start. 2003 Santa Fe, V6 Auto, FWD.
The engine has been making a loud ticking noise lately, starting right after an oil change it seemed. It actually sounded a lot like a stuck lifter, so I had an engine flush done, but this did not remedy the problem. Popping the hood one day it was particularly noisy, I noticed that it sounded like it was coming from the serpentine belt tensioner (or there abouts).
Anyway, tonight, *something* finally gave. All of a sudden I heard a squealing noise, then smelled burning rubber, and my battery light came on, and I lost my power steering. I figured that the tensioner finally gave out.
I turned off the vehicle to see what I could see. A bit of melted S-belt was it. I restarted it, and the belt was turning fine again, but while it was idling, I noticed that the crank pulley was shifting in and out now and then. When it moved inward, the S-belt shifted in as well, and started to rub on the timing cover, wearing a hole right through it! Have a look at the attached photo, showing the grove worn right through.
So I'm assuming that my tensioner was fine, and it was my crank pulley all a long. I'm figuring that 3 thing will need replacing:
1. Crank Pulley (the source of the problem)
2. Serpentine Belt (since it's probably half melted)
3. Timing Cover (can't see that water getting in there would be good)
Does this sound accurate?
My mom has a 2003 pontiac montana thats making a ticking noise says its low on oil but i just changed the oil 2 and half weeks ago. Why it would be ticking?
View 3 RepliesI have a 2001 Toyota Tacoma that has a knock or ticking in cold weather. The problem starts sometimes immediately after I start and other times it is only when I press on the gas in the cold mornings after a few min warm up. The noise goes away after 10 min. The question I am wondering is this:
1: could it be worn piston rings and the pistons are slapping the cylinder wall
2: is it an oil pump problem or a oil restriction issue
3: is it a valve guide issue
4: with the history of the 2.7 having exhaust manifold issues (poor manufacturing) could a cracked manifold be the issue
I change the oil myself, the oil filters have been OEM toyota, the noise has been going on since 60,000 miles, the truck is at 230,000 miles.