2001 f150 4x4 5.4 205k ... This truck is not my daily driver but I use it about once or twice a week. Last night I drove it to the store and it ran great. As good as ever.
This morning it won't start. It cranks and the battery is strong but no bang. It was cold. Just below freezing for the first time this year. No blown fuses where would you start?
So I just bought a 2001 F-150. It has the 4.6 v8 it's a 4x4 automatic. Sometimes i'll go to start it in park but nothing will happen. But if I put it in neutral. It'll start right up.
View 7 RepliesI have a 2001 ford F150 with a 5.4 2WD, with a starting problem. Last Friday I went to leave work the truck cranked but did not start, turned the key off and tried again same thing, on the third try it started. Drove it home 30 miles with one stop on the way, restarted just fine. At home in the driveway I restarted it 5 times without a problem so I was thinking it was just a glitch. Did not drive the truck all weekend thinking the problem was fixed.
Monday morning leave for work and everything was fine, went to start the truck in the afternoon and the same problem as listed above (3 or 4 tries and it started). It home again in the driveway restarts every time. I do not have any check engine light on but I thought I would still plug in my code reader NO CODE. Where to start troubling shooting this problem?
My 2001 f150 is not starting up. The anti theft light flashes and then eventually slows down and flashes one time, pauses and then flashes two more times. The odometer still shows my mileage as I know some people with this issue just get dashes. I know there are passive anti theft codes that can indicate what is wrong but cant find a chart with any info for all the codes. I'm going to assume my pats transceiver module is shot. Or maybe the key simply needs to be reprogrammed? I checked fuses, relays, etc and didn't see any that were blown. What could be causing it? Or maybe there's a relay I forgot to check out.
View 6 RepliesI am having trouble with my 2001 F-150. Starting yesterday it would not start. At 1st i thought it wa the battery, so i took it off, charged it, put it back in the truck and still no start. There is a clicking noise coming from a relay in the cabin fuse box, disconnected the battery, removed relay to inspect and everything looks good. After plugging it back in, and connecting the battery, the truck still wont start and there is a clicking sound coming from the dash near the radio. Rhis is my work vehicle!!!
View 3 RepliesI have a 2003 f150 4X4. Whenever I go around a round about slowly, the truck sort of grind under the frame and shakes a little bit like I am in 4 wheel drive.
View 2 RepliesI have a 2003 Ford F150 with a 5.4V8 Triton 4X4. The truck is about to roll over 200K here soon. I am feeling/hearing a vibration/grinding sound coming from the truck when I am moving slowly and making turns, either left or right turns. Seems to happen more so on left hand turns. I have changed all power train fluids and filter, and still does it. I do not feel or notice the vibration/grinding when I am going straight or at highway speeds. It is only when I am moving from a stop and making turns. How to diagnose, find out, repair, fix this issue?
View 4 RepliesI bought a 99F350 with a 7.3, it was not running when I bought it. Batteries good, new starter, turns over just fine, fuel pump works, but now I don't know what to look for.
Was testing ohms for my injectors and at the plug on top of the driver side valve cover, couldn't get a reading at all, tested the ohms at the pass. Side valve cover plug and got good ohm readings.
My 01 F150 5.4 with 208K miles is having a starting issue. Did it again today, turns over, but won't fire. Problem has occurred a couple times in the past, but started after just a couple time of trying. Today however it took many times of turning it over I would say 5 or 6 times before it started. Seems like it's turning over kind of fast as well (faster than normal). Runs fine after it starts.
View 14 RepliesI recently bought a 2003 f350 7.3, I ordered a tuner for it and tried installing it, at one point while the ECM was still connected I did something and it sparked. Then the powertrain relay (302) started clicking really fast. It clicked in the on position. I switched it with another and it was also clicking. So since I sparke the ECM I figured I messed it up. I ordered another one and it's doing the same thing. Then I pulled fuse 45 (which was good) and put it back in. When I turned truck to on position it wouldn't click anymore, but it still won't start... What it could be? OV ruled out the ECM, powertrain relay (302) and fuse 45, I don't know what else to check.
View 2 Replies2001 F-150 5.4 extended cab
You have probably seen this before. Engine cranks but will not start. Backed into driveway, loaded recyclables, truck would not start. Fuel pump relay clicks, a small amount of gas comes out of the schrader valve on the fuel rail when I press the stem with a phillips head sd. When the engine is cranking the check engine light is on so I assume the computer is working but there are no RPMs showing on the tach. At this point I'm thinking a bad crank position sensor. Would that sucker go all at once like that? I believe they hid that behind the ac compressor. Am I looking at removing the belt and compressor to get at the sensor?
The odometer light turns on and off (mostly off) and seems to be getting worse. The repair shop I go to said its a dealer item and they usually send them out to a specialized shop, the dealer said replace instrument cluster. I may not be the best but I would like to try a few things before I shell out the money. I read that it may simply be the connections at the Instrument cluster plugin which might just need cleaning, read another fix which involved Pencel soldering, Cold Solders on the instrument clusters circuit board.
View 2 Replies1999 F-150 XLT 5.4L Triton 4x4 super cab with a 4" body lift. I bought it used. It has 225,000 miles with engine and transmission rebuilt. This truck doesn't get driven every day - sometimes sits for a week or so at a time...
Issue: A couple weeks ago, it took 4 or 5 attempts to get it to start. Once it started it ran fine and re-started fine. Then my wife drove it but parked it back at home with the gas practically empty. Then it sat for at least a week or so before attempting to start it again. Now it just turns over and won't fire. I suspect fuel pump relay, fuel filter, or fuel pump (hoping its not the latter)
What I have done so far:
1. I put more gas in it in case it really was skimming the bottom of the tank.
2. I tried cycling the key several times thinking that maybe the fuel line just needed to prime.
3. I don't hear the fuel pump "whine" for two seconds when I turn the key to just before start.
4. I checked the fuel pump relay fuse (#10) - not blown
5. I have swapped thet fuel pump relay (#301) with another relay
6. I put 12 volts across the just the relay and I can hear it picking up and dropping out (when not inserted into slot 301)
7. I put my hand on the relay and had someone else turn the key and I can feel it picking up and dropping out (when installed into slot 301)
8. I went and checked out a fuel pressure tester from auto zone and connected it to the schrader valve and got 0 psi while turning the engine over.
All this points me to the fuel pump, but I am not looking forward to dropping the gas tank. With 0 psi, I doubt the filter is just clogged. I would still get some kind of pressure at the fuel rail, right?
1998 F150 with 4.6L Windsor SOHC. I just completely rebuilt the engine including pistons, rings, timing chains (timing is good; compression @ 180 psi), 2 new coils, wires, plugs etc. and there's no fire at the plugs when I crank it. It turns over good but doesn't start. The fuel pump comes on and there's fuel up to the injectors. Before I disassembled the engine, it still ran good except for one piston. The 2 new coils, wires, plugs were replace before I rebuilt it. I was very thorough when re-installing the electrical etc... and triple checked it all after the engine not firing. Fuses are good. I know it's hard to trouble shoot without seeing the truck? The battery has been disconnected for months as I started a long time ago. Computer maybe?
View 6 RepliesI just got a 1998 F150 5.4l 4x4 autotragic. Was sold to me as needing trans, wouldn't start. Tossed in a new starter and solenoid, now I can hear the the starter turn crank pulley turns maybe a quarter inch and when I let off the starter it goes back to the same spot.
Fear is motor is locked, but question (i don't know automatics) is there any way that a bad trans could keep a motor from turning over? Truck rolls in neutral or drive, pulled the drain plug no water just oil. Tempted to just buy a running 5.4 with trans but if I can avoid that I'd prefer to.
When I want to start the truck dix nothing and I don't know why? I have to tell you that I have changed my tranny ...
View 3 Replies2002 Model, F150, 4.6L Triton....
Early last week one day my truck just wouldn't start. I had driven it the day before. but that day nothing. It would spin over just not start. the following day though, it started as always, no hesitation and run smooth. But the was the last day it has ran.
Since then I have checked the relays and fuses. I have checked the inertia switch (pass. side kick panel). Removed the cap on the schrader valve on the fuel rail. (no pressure)
I have sprayed starting fluid into the throttle body and it starts for 1 to 2 seconds. (dies once starting fluid is gone). I have changed the fuel filter and pulled the bed and changed out the fuel pump. I'm thinking about trying the fuel pressure regulator next.
Just not real sure where else to go if that doesn't work.....
I have 2001 F-150 with 4.6L. Truck runs fine until under load and runs fine until I slow down to a stop sign. Once truck sits for a few moments it fires up again and will run for a short while then will do it again. Each time i let it sit for a few minutes, it will start again.
I pull a small travel trailer and seems to happen more frequently when pulling or climbing hill, but not under full power, just when slowing down. Could this be cause of catalytic converters? MAF sensor, or fuel starving.
Check engine light is on, will codes identify if it is a plugged cat?
I have a 2001 f150, 5.4triton, 4x4 supercrew. I'm having trouble getting the truck started. About a month ago is when I first started having trouble with it, and it's happened more frequently until now it just won't crank up at all. The engine is turning over, but it it just won't fire. When it starts, it runs and drives fine, no cut off or rough idles. I replaced the cam sensor today (figured it'd be worth a shot for 20 bucks) but that wasn't it.
View 2 RepliesI drive a 2001 ford f150 lariat 5.4L. My truck will crank but not start, i am getting complete spark, and have ran a full fuel pressure procedure, and am getting complete fuel pressure, there is no water in my gas, everything checks out how it should. I ran a test on my cluster and it showed a code that said i am not getting connection to computer to start. I removed the cluster and repaired all loose wires properly, and it still wont start! I have had many people look at it and they said it could still be a bad cluster.
View 13 RepliesI have a 01 F150. I just turned it on and everything was fine it turns on lights turn on but when I tried to get out of the garage I would not shift. Windows won't go down . I am guessing it's something electrical .
View 1 Replies