Ford F-150 - 1997-2003 :: 2001 - Steering Column Wobbling A Little When Hit Bumps
Jan 24, 2013
I just recently picked up a 2001 F-150 4x4 super crew. The steering column is wobbling a little when I hit bumps. I accessed the column and there are two white plastic "bushings" that hold the casted portion of the column tight against the studs with the star ends. This is above where the reinforcement bracket is bolted on. One of them is worn and won't tighten down to hold the column tight. What these are called so I can't find them to order them, I used a large washer for the time being but would really like to replace with new ones.
View 1 Replies
Advertisement
I have a 99 F150 4x4 it recently started shaking badly on the front end at about 40mph but levels out at about 45 to 50 mph or if slowed back down to 35mph. I can't find anything worn or loose except the sway bar bushings are completely gone on both driver and passenger sides. I have read about the "death wobble" but can't find anything else worn out! I can do most all repairs and checks myself.
View 2 Replies
Recently noticed when driving, I'll hear and feel a slight clicking noise coming from my steering column. I can be going straight or turning. it is intermittent. I've look underneath and nothing seems obvious. when the truck is in park, I've tried to manhandle the steering wheel, the steering wheel is solid. the truck is a 1998 f150xl v6.
View 1 Replies
I have a 1997 F150 that I have taken to a mechanic twice and it is still not right. I had a igination switch replaced and now when the humidity is really high
(I am Guessing), I can have the key in the house and my truck lights flash the radio is on and it sounds like it is trying to start. How hard is it to replace the igination switch myself. I believe it has a short someone in the steering column.
View 1 Replies
My wife had been complaining about a rattle noise coming from the front of her 10 RX350 when she goes over bumps at about 35mph or so. Could not pinpoint the problem?
View 4 Replies
Went to pick up my Touareg tonight. Took it for a quick test drive and there was a noise and rattle coming from the steering column when you hit bumps. It sounded like metal on metal. The tech guy drove it with me and agreed something is wrong. They put it up on the rack but I left because I had been there for one hour and that was already past my mental limit for being in a car dealership. I didn't sign the paperwork. Told them to call me when they figure it out and I'll come back and buy it if the problem is not significant. Everything was going great until then.
View 2 Replies
it's strange, it feels like something is loose, not the steering wheel but the column that the steering wheel attaches to, this only happens when going over dips or bumps, any time the wheels take impact.
View 82 Replies
Took my 99 XLT super cab to a Ford dealer to have a new key made (I have only one so can't do it myself). I was told the PAT (Passive Anti-Theft) module wouldn't communicate with their system.....
As I understand it, the PAT module communicates wirelessly to the key module under the steering column. Since the PAT module is obviously working (the truck cranks, starts and runs fine). What are they talking about?
View 14 Replies
I noticed after the crash the steering wheel is moved forward and gear shift is up against dash. asked around and one person said they made collapsable steering wheels to impact. i have never heard of such a thing.
View 5 Replies
My 2003 santa fe steering column won't lock when the key is removed. What might cause this to happen, or not happen I guess? I would like to have the lock working.
View 1 Replies
Just curious what type of power steering fluid should be used in our trucks. What works best?
View 2 Replies
98 f150 4x4 5.4... So i purchased this truck about 3 months ago and now I am having problems putting it in Park. The column shifter is very loose and sloppy. Is there any way to rebuild this?
View 3 Replies
Here's a little more info on the truck I'll be working on:
-2001 Ford F-150 XLT Supercrew Cab 5.4L Triton.
-Has been used as a work truck so it has some miles on it 200,000+ and it shows. He showed me the lower control arm and the upper control arms bushings are a worn. Some coming apart and others with cracks in the (the bushings).
-So might need some more things replace but need to learn more about the truck to figure out exactly what?
Anyway, I'm probably just scratching the surface of the work needing to be done on this truck but for now I'll focus on the more important issues since without a functioning steering wheel he cant drive the beast. Might end up doing some customizing to the truck in the future such as changing the headlights to give the truck a more meaner look, along with the grill.
View 14 Replies
I have a 2001 ford f150 lariat 5.4 L Trition it shuts off while driving the steering wheel locks up when the truck shuts off I tried everything and it doesn't seem to help the problem. I changed the Iacv idle air control valve,I had a bad o2 sensor changed that, changed the crank sensor, cleaned the throttle body and changed the Tps sensor, got a new battery, changed the vacuum lines.i really don't know what else to do this truck is becoming a nightmare and is dangerous to drive I never know when it's going to shut off and when it does shut off sometimes it starts right up and other times it doesn't.
View 2 Replies
My truck was stolen over the weekend. Fortunately, it was recovered but they broke the key lock on the steering column and I'm having a hard time getting it started. I can turn the ignition all the way to the start position with my key or a screwdriver but the starter never engages. I'm sure I'm missing something simple but I can't seem to figure it out. Looking for instructions on how to get this started again?
View 14 Replies
I have a 2001 excursion, v10 4x4 just bought it used thinking I scored until I drove it home (mostly noticeable on freeway, which I didn't do while on my test drive) the steering wheel stays straight, but the truck doesn't stay straight in the road lines,the car turns!! Feels real loose , I hear rattles, rattles going over bumps but mostly real slight uncontrolled steering and seems floaty. Is this a common problem? I did a little searching and found some posts about rattles but noble about sloppy steering.
View 8 Replies
My steering wheel has a squeak when turning either left or right slightly from center.. I usually notice the squeak while stationary or parking. It's louder and more noticeable when it's hot outside.
Listening carefully, it seems to be coming from inside the steering column, not from linkages or joints from under the car. Looking for a exploded diagram of the steering column components, perhaps it's just a U joint (tilt?) that needs some lubing to make it quiet.
View 2 Replies
2000 XLT ext cab 4.6 4x4 auto .. Having a couple of problems in below freezing weather when temps are below 30 deg F.
1. I have the usual P/S whine, but when starting up a cold engine, the whine is extremely loud and the motor won't stay running. It starts and immediately dies. I have to give it a little gas to keep it running. It only takes a few seconds until the whine dies down, then it idles fine. Should I just replace the P/S pump or is there something else I need to look at?
2. Again, with a cold engine, when I start driving, the OD light on the column shifter flashes. It flashed for quite a while. The tranny worked fine, though. No problems shifting. I was told that I have to have the dealer read the code and it can only be done when its flashing. Is this true? I'd rather not spend the $$ if its something I can take care of myself. I did change the tranny filter and that worked some. Now the light flashes for about 2-3 minutes then it goes away.
Like I said, these problems are only on days when its below freezing and once the truck is warm, everything works fine.
View 3 Replies
Of late my steering column has been getting stuck in park and I have to fool with it and manipulate it between moving the steering wheel and pressing on the brake until the column releases and then I can move it into drive.
View 3 Replies
When I turn over bumps not on corners I hear nothing lol ..I just changed the tie rods for other reasons and nothing is loose in the front end now..But this sound is from the box of the truck like something is in the box bumping around when turning corners over bumps..Its frustrating and I cant find out what it is..Only happens when turning over bumps ?
View 6 Replies
So I know there has been lots of posts on surging issues and how to troubleshoot. My truck is a 97 f150 4x4 xlt 4.6l v8. I have noticing surging and dropping in my RPMs lately. No CEL. I have kept a journal when I notice when it happens. I only have issues when I am driving around 40-50 mph and if I go over bumps/pot holes/rough spots in roads or when I'm braking over bumps/pot holes/rough spots, my truck surges/RPMs drop CEL flashes on and off only during these instances. Makes me think something could be loose or something causing this. It has stalled at times when having to brake fast (yellow light, etc.). Where to look first? 1997 F150 4x4 4.6 V8...
View 1 Replies
