I have a 2001 ford f150 4x4 xlt and it seems to be shaking violently in first gear when I try to release the clutch slowly. The person i bought it from said he had a new clutch put in this year So i don't think its the clutch. What could be the cause of it before I take it in to be checked.
View 2 RepliesI've recently noticed that my 2013 hyundai sonata would start vibrating/shaking, if I were to release my brakes slowly (It doesn't shake if I release it fast). I was wondering if there are any problems with that?
I do not feel any vibration in the car when I press /slam the brake. The only time I feel the car shaking is when I would slowly release the brake.
I Have A 2001 F 150 And I Have Just Noticed That On Cold Morning When The Temperature Is Below 35 That My Transmission Takes A While To Shift Into High. Sometime I Am Two To Three Miles Down The Road Before It Will Shift Into The Last High Gear. Is This Normal Or Should I Have This Checked Out? I Have 53,000 Miles On This Truck And Do I Need To Have The Fluil Changed An Serviced.
View 10 RepliesI have a 99 f150 with 171xxx miles and the other day it suck in second gear and start shaking and misfiring and would stall out. I took the truck and got the codes read and it threw codes for the tcc solenoid and shift solenoid. I put both in the transmission and it kepy doing the same thing. I check fuse 24 under the hood and it was blown, I replaced it and everything worked fine for a day then it blew the fuse 2 more times and i cant figure out why it is blowing that fuse. I cant find any shorts maybe pcm??
View 5 RepliesI have a '99 f150 singlecab xl sport 4.2 2wd 5spd with 139,xxx miles on her. Shes's a good truck, but second gear is shot, I can only get into it by double clutching, and that only sometimes works. I have a couple questions, the first one being what do yall think the problem is. To me and my friends it seems like the syncro mesh. Second, if it is something major, is it even worth saving the truck? I know she isn't worth a ton but I hate to go through the hassle of selling and buying a car.
View 1 Replies I have a 2001 f150 7700 edition. The truck has 118,000 miles and i've owned it for the past three years, the trucks great and really reliable. I drive the truck every day 50 miles to my college and about two weeks ago my truck started shaking . I had just got off the highway and made it to a stop sign. I then took off and when I hit about 30 miles an hour the truck started shaking but when I hit 40 it stopped.
I said whatever and ignored it. now it does it pretty much anytime I go past 30 miles in hour. My tranny shifts good. I checked the fluid and it was normal. smelt it and it didn't smell burnt or anything still pretty red. Some days its worse then others. Also, no engine lights, tranny lights, no obvious lose parts, tires are good. It only shakes when I give it gas. I let off the gas at 80mph and it doesn't shake at all. Which is why I'm confused.
2000 Ford F250 crew cab 4 x 4 with 7.3. 6 speed transmission. I just had a new clutch installed and now I am have a grinding noise when putting it into 1st gear and when I change from granny to first it will grind also. I did not have this issue before having the clutch replaced. I have also just had a new hydraulic clutch kit installed.......
View 1 RepliesI drive a 24v vr6 GTI in 6-speed I was coming home and as I turned and got on the gas a little and all of a sudden there was a pop and my car couldn't go in gear when I release the clutch. Luckily I was close to home and basically cruised in neutral. I jacked it up and found that my axle is twisted. Now I was aware the boots were torn before so I'm assuming the axle got screwed up but my other concern is, why won't my car go in gear? Here's the photo of inner CV. I'm hoping it's just an axle and not the clutch.
View 8 RepliesWell here it is I just put a new slave cylinder in my 02' F-150 and once we figured out all the little issues we were having we finally got the truck to fire up!!! Now my problem is that when the truck is running I can't get the truck into gear with the clutch pushed and it doesn't even grind. But when the truck is off it goes through the gears no problem what so ever. When we did the slave cylinder while we were in there we just replaced everything clutch, pressure plate, flywheel, rear seal, and pilot bearing. We figured that since all the shops were quoting me 800 and up for just doing the slave that since were in there we might as well do everything since nothing has ever been replaced yet. My question is why will the truck not let me shift into gears when running but no problem when off. Oh and yes the system was bled after doing the slave actually twice so far.
View 5 RepliesMy AC clutch is not turning on. I do not have any AC gauges but if I unplug the compressor and put a meter on the 2 harness pins, I do not see any voltage when truck is running and AC on. I really don't know much about AC but I am thinking the problem may possibly be the low pressure switch or possibly low on freon. How can I check if I am low on freon without gauges? Where exactly is the low pressure switch located on my truck and if I jump the switch and the clutch kicks on, does that tell me that the problem can only be the low pressure switch or low on freon. I'm just trying to work through a few of the gremlins.
View 14 Replies2002 Elantra
Replaced new clutch disc and new pressure plate.
Without turning on the engine, the clutch pedal seems to get harder to press, until it can't be pressed down anymore. The pedal can't be pressed down.
Clutch fork lever does not release.
I've A Problem With My Car Nissan Tiida 2007
When In First Gear While Releasing The Clutch The Car Shakes
And If I Didn't Release It Fast The Engine Will Stall
I have a 2001 Ford F-150 5.4L Supercrew that won't seem to shift out of 1st gear. This morning coming out of stop light on the way to work, the truck seemed to jerk when it was supposed to shift into 2nd gear. I was told by a friend that the speed sensor may be it?
So I took the truck around the block just so I can get a feel for what is going on. So the truck shifts into 2nd, but not past that. It seems that around 30mph the RPM's go up jump up quickly to 2k+ and no shift or increase in speed. I was reading up a bit on it and came across the possibility of a TPS?
I'm replacing my rear diff cover and didn't realize there are multiple sizes. How do I figure out what the size is of my ring gear?
2001 F150 XLT 4x4 SuperCrew, 5.4L
The problem started with a front seal leak a few months ago which I had no choice but to continue driving with because of low funds. I don't drive much so a couple of quarts of ATF was usually enough to get me out and about for what little driving I had to do. I know.. a front seal is cheap, but I'm partially disabled and unable to work on anything that is not under the hood.
I finally scraped up enough money to hire a friend to replace the seal, but he had a life crisis before completing the work, so I had to get another friend to reinstall the trany... still had the leak, but I could get around by adding ATF as before.
So we tried again... dropped everything and put another new seal on. This stopped the leak, but we got some grinding/squealing noises and could not get the trany to engage any gear.
From reading forum posts and other sources, we decided to replace the TC which we just completed this evening. We got some more of the grinding / squealing noise like before, except that it only occurred the first time we tried cranking the engine, the 2nd time we got no noises, but again no gears engaging.
What to check/replace next assuming there is something we can look at other than a total trany rebuild or replacement. I personally find it hard to believe we could have gone from a tolerably functional trany to scrap metal just replacing a seal and the TC. Its gotta be something simple we overlooked !!
I just bought a f150 2001 5.4L crew cab. It has the O/D switch in the gear shift lever and the black plastic handle is broke. I found a complete replacement lever on ebay but cannot find any tutorials on how to replace this.
View 8 RepliesHave an 01 f250 superduty with a 5.4 triton ... Plugs done 1500 miles ago along with boots just tested and put in 4 new coils.
I have developed a miss and i feel like I am parts chasing. The miss only shakes the cab when it goes to the lowest rpm for that gear. It is very subtle when it is in idle.
I just came back from a long trip and during the 400 miles drive I started to hear noise coming from my differential - kind of like a constant high gear loud noise. I will hear this noise when I start to accelerate and it will only gets louder and louder as I go faster and faster. I had a pinion seal leaked fixed last week and I checked the fluid and it is full.
View 9 RepliesI have a 2001 F150 2 door 2wd 5.4 engine. When I put it in gear the automatic door locks do not activate. The procedure for programming the remote does not work either. It calls for turning the ignition switch on and off 9 times, and the doors should unlock, so that procedure does not work either.
I took it to the dealer to have the BCM reprogrammed, they say there is no BCM in the vehicle. The codes they got says there is a door ajar, and the interior lamp relay DTC. I am not sure what the DTC means, forgot to ask.
The door warning light goes out when the doors are closed, and the interior light goes out. They do not seem to know how the system operates. I bought the wiring diagram.
From what I can see, closed lock switch connects directly to the GEM. The dealer told me there is two switches in the door. There is only one as far as I can determine. Ther are two plugs on the locking mechanism, on is for the remote lock, it works. So the lock closed switch is also working.
Reading this forum, I see several cases where people have changed the GEM, and that did not fix the problem. I can not see any other solution, as the door closed switch connects directly to the GEM, and the door open warning goes out, and the interior light goes out.
I have removed the panel cover; cables are out - door is still stuck! Is there a way to release the latch? It is the driver side back door - 2001 Lariat.
View 4 RepliesOn said truck, when you go to stop, the brakes grab a bit, then release , then the pedal goes to about 2 inches off the floor, then they grab and hold. Pumping does nothing. No abs light on the dash. Today we put the truck in 4high and while back up I had full brake pressure from the top. Also when you take off, either in the mornings or during the day, it has a slight vibration, kinda like a brake grabbing, then all is fine. The brake grabbing isn't there 100% of the time, I would say 95%. I haven't changed the brake pads, rotors, or anything yet. Just didn't want to throw money at it and still not fix the problem.
View 4 Replies