Ford F-150 - 1997-2003 :: 2000 F250 - AC Fan Only Works On High
Aug 9, 2012
I got a 2000 F250 XLT that the AC fan only works on high. Same thing in heat mode. Is there a relay for the other speeds that I need to check out?
View 2 Replies
Aug 9, 2012
Advertisement
Ford F-150 - 1997-2003 :: 2000 - Driving With AC On / Fan Only Works On Hi
I was driving my f150 with the AC on, it has a 4 position fan switch. Lo, 1 , 2, and Hi. The fan only works on Hi. I don't think its a fuse, so what are the possibilities ?
View 3 RepliesFord F-150 - 1997-2003 :: 2000 - High Idle With Codes
I will try to keep this short. Picked up a 2000 f-150 4.2 for my nephews first truck last night. Bought it blind against my better judgement, but the price was right. Got it home, odometer didn't work, fixed the solder joint and was happy it only had 132k on it. Heater core was plugged solid. Got it flushed and at least now its has luke warm heat until I have time for a full coolant flush and new core.
Next on my list is the high idle and engine lights. Its idles around 1300-1700, cold or hot sometimes it drops down. I only have a cheap scanner, but I have 2 codes. PO171 and PO174. Where should I start with diagnosing this? I would assume vacuum leak. Any common spots to check on these?
Ford F-150 - 1997-2003 :: 2000 XLT 4x4 Starts Vibrating At High Speeds (above 65)?
Why my truck shake/ vibrates only at high speeds above 65mph. Once I drop below 65 is smooth as can be.
View 14 RepliesFord Excursion :: 2000 - 4X4 Low Works But No 4 Wheel Drive In 4X4 High
I have the ESOF in a 2000 Excursion. I went to use 4X4 high and it would not give me 4 wheel drive. light on dash said 4X4 but no 4 wheel drive. I was in snow and only rear wheels spun. When switch is placed in 4X4 low I get 4 wheel drive.
View 1 RepliesFord F-150 - 1997-2003 :: 2000 F250 Cab Heater Blowing / No Warm Air
This problem is on my son's 2000 F-250 5.4. It's into October and my son tells me he has no heat coming out of his vents. I figure it has to be the control valve that should be in the heater hose lines. Could be jammed closed or a vacuum line has come off the pot that controls the open close cycle. We open the hood and nowhere can we see a coolant control flow valve. It is so tight and dark under all that mess of wires, intake, air conditioner lines and whatever.
Just where should we be looking for the valve. Also it could be the vacuum line is unplugged on the dash, behind the warm/cool selector. And even there is a possibility that some doofus has removed something. He bought the truck this summer. So to get us on the right path, where we start looking for the flow control valve?
Ford F-150 - 1997-2003 :: 2000 F250 - Cruise Control Not Working
I did the diagnosis,on my non working cruise control on my 2000 f250. The cruise light came on when, I, depressed the off switch and turned key on. I depressed on switch,cruise light came on.
I then depressed the resume, coast, and set switch, as described in the diagnostic procedure,suggested,and no light came on. Do the switches for the cruise control are bad.
I have checked the fuses at the power distribution box under the hood and checked the fuses under dash,all are fine. I just replaced the switch at master cylinder, as it was leaking and it had the recall switch replacement, too.
Ford 7.3L Power Stroke (1999-2003) :: Blower Motor Only Works On High?
I don't know if its a coincidence but it rained hard all weekend and went to work this morning to find out the blower motor only on 4(high). I checked the plug going into blower motor and it looks dry and clean. is there a common occurrence with this? What to look for?
View 14 RepliesFord F-150 - 1997-2003 :: A/C Works For 12 - 15 Miles Then Shuts Off?
2003 F 150. 5.4 motor. 4x4. 270,000 miles. Climate control.
The A/C is ice cold.. For the first 12-15 miles, and then it shuts off and is warm.
I had it recharged at the shop just to be sure. When it works, it blows out the vent at approx. 42 degrees.. nice and cold.
This problem happens every time. Turning the climate control off and then back on doesn't work.
Shutting the truck off and then back on doesn't work. Wait a while.. Not quite sure how long, but the next time I drive it, it will work again. For about 12-15 miles and then blows warm again.
A bit of funky , moist smell to it when it blows warm.. Typical A/C smell I think.. The box could prob use a cleaning.
Ford F-150 - 1997-2003 :: AC Works But Air Out Of Vents Is Not Ice Cold On Max
The AC works, but just not well enough on a really hot day. On a day in the 90s I have to put it on Max AC and even then it does not cool down for a while and the air out of the vents is not ice cold.
So, it works, but I cannot tell if there is something wrong or not. I recently put in a can of AC Pro and it did not change anything.
Ford F-150 - 1997-2003 :: Odometer Sometimes Works Other Times It Does Not
My digital odometer is funky! Sometimes time it works sometimes it doesn't. Sometimes it works on start up than after a lil while it fades out.
View 7 RepliesFord F-150 - 1997-2003 :: 2002 - Air Conditioner Works Sometimes
So my a/c works some times. I'll get in it in the morning, turn the a/c on. It works great, ice cold blowing hard. Then I'll turn the fan down from high and in a minute or so the cold air stops and it blows warm. Then for the rest of the day it wont blow cold air(i get in and out of my truck a dozen or so times through out the day turning the truck off each time). my dad has a freon pressure gauge. We checked it and it had good pressure. the blue gauge was at 50 and the red was a hundred and some i forget, but dad said "that's where it should be" so i guess that's not the problem. I am wondering if there is switch bad or a sensor. Its an '02 fx4 f150 4x4 140,000
View 1 RepliesFord F-150 - 1997-2003 :: Heater And AC Control Switch Works When It Wants To
Got an 01 f150 excab with the 5.4 as of lately sometimes when i turn the 1-4 blower control know it wont do anything on heat or ac than other times it will work like it supposes to?
View 2 RepliesFord F-150 - 1997-2003 :: IMRC Works For 30 Seconds Then Quits
98 f150 4.2l imrc quits working after 30 secs or so. Valves are good,linkage is good, vacuum lines good, electric vacuum switch/valve on r/h side of intake good, power to that switch/valve is there, loosing ground from computer??? What tells the computer to operate these valves?
View 9 RepliesFord 6.0L Power Stroke Diesel :: 2003 F250 - How Auxiliary Fuel Tank Works
I recently purchased a 2003 F250 Super Duty with a 6.0L Powerstroke Diesel. The truck came with an auxiliary fuel tank in the bed, but how it works. There is a keyed switch in the cab next to another regular switch, and I have not had the courage to try either of them yet since the whole thing looks like a DIY job. I did look under the truck, and can see what appears to be some sort of solenoid setup.
Just wondering, how it works and if it is safe to operate. I do not see any rollover valve, and want to make sure I do not overfill the tank if I use it.
Ford F-150 - 1997-2003 :: 5.4 Stalling In Drive Only / Reverse Works Fine
2002 f150 7700 with 5.4 triton and 4r100 tranny started chugging under acceleration and now stalls when put in D, 2 or 1. park and neutral are fine and reverse works perfectly.
Now when I put it in drive it chugs and stalls immediately... 1/10 times it will keep running but chug violently like its running out of gas. will get worse and stall if you press the gas. i can light the tires up for a block in reverse however.
Changed coils 1 2 and 3, IAC, bank 1 knock sensor, camshaft position sensor
Ford F-150 - 1997-2003 :: 2001 - Heat Only Works On Lower Settings
My 2001 f150 super crew, the heat only works on speeds 1-3. All 4 speeds blow air fine, I'm talking about the temperature. not the blower. Could it be the heat resistor?
View 4 RepliesFord F-150 - 1997-2003 :: Turn Signal Only Works With Tilt Steering Wheel All Way Up?
my turn signals only work with the steering wheel tilted all the way up. It works for me, but my wife drives the truck mostly because we live a mile from her work. The dealer said it was a "peanut connector." And can someone walk me through the steps to fixing it?
View 8 RepliesFord Exhaust :: 1997 F250 - High Flow Cats Performance?
Would a high flow cat on my 97 f250 7.5l make any more performance and would it make it any louder? My truck has the air tubes on it so its hard to find a cat for it.
View 4 RepliesFord Super Duty (1999-2016) :: 2000 F250 - Blower Would Only Blow On High
My dad has a 2000 f250 4x4 with the 5.4. he said his blower would only blow on high. I told him it was his blower motor resistor. i thought it was under glove box. he took it apart and said no but there was a little box thing with wires he took off anyway and put back on. I then told him it was under hood below a/c lines. he replaced old one with a new one from auto zone and replaced the pigtail( plug too) fan works on high and a little bit on low very very little when u switch it to medium it stays the same. High works great. So we replaced the fan switch. (Radio was a bitch to remove) and it still does the same thing. I checked all fuses . when I check the plug at the resistor there is power to the center pin it stays on when u switch to low and medium but when u turn high on power goes out( on test meter) is there something I am missing? the blower blows on high even when u remove the plug from the resistor. Is that normal?.
View 4 RepliesFord F-150 - 1997-2003 :: 2000 4.6L - Missing Only Between 1500 And 2000 RPM
I have a 2000 F150 with 4.6l triton 125k miles. i have a bad miss ONLY between 1500 and 2000 rpm. This will happen in any gear and in neutral, but only between those rpm's. seems to happen more constant in warm weather. This miss is so bad it feels like the transmission is going to fall out. but since it does it in neutral i doubt tranny problems. things I've replaced: fuel filter, tranny fluid and filter, crankshaft pos. camshaft pos, TPI, MAF, spark plugs, Ignition coils ( all 8) cleaned throttle body ( found 1 EGR port clogged completely )..
I had a couple codes but nothing constant. Been working on this for about 1 year. Codes p0320 (ignition speed input error) p0262 (injector circuit high cylinder #1). my only question here is...... What would only make this dang engine miss between 1500 and 2000 rpm. motor runs perfect thru all other ranges. idle... high speed.. and even throttling through this bad range is ok.. but when stabilizing between 1500 and 2000 starts jerking and missing like no fuel and no fire. i have put in superchip program couple years ago and it ran fine for about 1 year, then this trouble started... I have put back to stock program but still trouble.