I have a 1999 f150. Its having a fuel problem i was driving and my truck just cut out on me. I have diag it as the fuel pump cause when I turn the key, I have no response from my pump.
View 2 Replies1999 f150 4.2l v6.. The anti theft system has kicked in and my truck won't turn over, the stereo won't turn on, the lights don't work. How can I fix this?
View 6 RepliesI bought a 99 f350, that already had HID's in it, i found out i was running the wrong batters (weren't 800 cold crank) I just had to replace the alternator. Ever since the new alternator when i turn on my headlights my truck shuts off. IT fried my IDM and i just put a new IDM and 2 new batteries in it today. Thinking i had fixed the problem i drove around no issues, finally i was leaving someones house and turned on my lights, and truck shuts off!!! It restarts but now im trowing a code!!!! im guessing the HIDs are wired wrong and that's why its shutting down the truck but OEM IDM from ford is 1300$!!!!! brand new one installed today,
View 5 RepliesI have a 99 7.3 F250. It dies when I slow down for a turn or for a stop sign. At highway speed, it 'surges' sometimes, and makes he whole truck jump. Also, there is a small leak in the tube connected to the turbo. Has 250k miles ......
View 1 RepliesI have changed pickup filter in tank and cleaned 2 tube filters in tank i thought that would fix it.
View 3 RepliesHow do you test the fuel pump regulator, the truck wont start. I tested the schrader valve and it does have pressure but didn't seem like much. (need a gauge) I replaced fuel pump a few years ago so was wondering about the regulator. Is there a test procedure?
View 7 RepliesI have a 1998 Ford F150 with 4.2.. Started off a intermittent problem of not starting acct no fuel. Now will not start at all. Checked all fuses and relays.. Am not getting voltage at fuel pump. Changed ECM thinking that was the problem.. Have checked all multi wire connectors for corrosion and tightness. Am at a lost what to try next.
Also, not sure if its related or not. The turn signals and hazard flashers do not work. When I turn on the hazard flashers, nothing happens. If I leave the flashers switch on, the turn signal work. Checked all fuses and relays and they appear good.
My brothers 2001 is having an issue with the fuel pump. It has a random no fuel pump basically the fuel pump does not come in, he turns the ignition off then back on and you can then hear the fuel pump turn on and the truck starts and runs normally. I'm not looking forward to dropping the tank to replace the sending unit so I was thinking maybe the relay is the issue? I'd eater do that than a sending unit job...
View 8 RepliesA couple of weeks ago my truck wouldn't start. I replaced the crankshaft position sensor and when that didn't work I took it to a mechanic. At first it wouldn't start for him either. After move the truck inside he tried to crank it again and it fired right up. He said he didn't want to replace something if he wasn't sure what it was. Today it wouldn't start again. I bought some noid lights as suggested on line and tested one of the injector connectors and it did not light up. I realize that the injectors are not getting the needed "pulse". Whole thinking about what to do next I noticed that there was a broken wire. The wire is going to a really small looking box of some sort that is attached to the engine close to the injector at the front of the engine. What the wire is for and I am really not sure what to do next. I will try to upload a picture...
View 13 RepliesIf I turn on my ignition switch and my gauges go to where they're supposed to be, the truck will crank. If I turn switch and , lets say gas needle for example, the needle goes to full then drops back to empty, the engine will turn over but will not crank.
View 2 RepliesOwn a 1997 F-150, 4.6 L, 4 x 4. I know it's old but it's in very good body shape, has been undercoated for years. I've only had it for a year. This summer it began to not start (intermittently). The dash lights all come on but the starter will not engage. Brought to my local garage, he changed the starter and the ground cable from the battery.
Was ok for a few months and now it's beginning to do the same thing. Brought it back to him, can't find anything. He did say that the battery is a bit weak, the terminals are spotless (I keep them spotless, coat them with white grease). I measured the voltage with the engine stopped and with it running. Stopped, the voltage is 11.94, running it is 14.87. This clearly shows that the battery is weak.
My question is would this cause the starter to not engage after 4 or 5 turns of the key and then on the 6th try, the starter turns over? I don't want to spend more money ($ 450) the last time and have the same result. If it's possible it's the battery, I'll replace it no problem.
Ok I have recently bought a 1998 Ford F-150 V6 4.2L 2WD and when the guy sold it to me the check engine light was on and he told me that randomly when you turn the key to the on position you will not hear the fuel pump buzzing sound and he knew it wouldn't start, he said you would have to turn the key from the on and off position many times until you hear this sound and then the truck will start and run fine.
First off I got the codes read and there were three of them P0171, P0174, and P1537 some things to note are that the drivers air bag looks like it had deployed, the cover is loose and when I pulled it back the air bag looks duct taped up inside there that would cause the air bag light to continuously flash while driving. I noticed the battery leads were corroded so I replaced the battery and put new battery clamps on both wires, after that the problem did not happen for a week and I though it was over but it happened again.
Next is that the truck has the PATS system and it did not come with a remote which I have also read that the PATS system can cause the fuel pump not to turn on but not sure if this would cause it to not start randomly because sometimes it starts right up. When I started to look at the simple things to fix I noticed it did not have an air filter in the housing. so I thought the MAF sensor could be dirty so I cleaned it with the special cleaner, I put sea foam into the intake via a vacuum hose and also have put a fuel system cleaner in a full tank and have driven most of the gas out. After putting in an air filter, cleaning the MAF sensor, and sea foaming the intake, it seems to run a bit better but I am still having the random fuel pump issue.
I have checked the fuses and the and the fuel pump and ECM relays both are fine. Today I put new exhaust on it because it had some bad exhaust leaks and the truck did not start again, so the guy trying to put my exhaust on, hit the fuel tank with a hammer and it didn't work then hit it again and it finally worked. Im not sure if the hitting it did it or if it just randomly turned on like always from turning the key on and off. The new exhaust has made a huge difference in driving it feels and sounds much better.
Also to note is that when I am stopped at stop lights it will idle at about 1500 and then it drops down to 500 and back up and back down again and it does this at most stop lights, and it is not an abrupt drop it just slowly idles down and back up again. Again once the truck is started it runs perfectly fine with no issues, and there are no specific times when it has the problem it seems to be randomly. I know that many people will tell me to change the fuel pump out and I am already prepared for this but if there is any easy things I haven't thought of yet...
I have a 1997 ford f150 V-6 4.2. My son was driving the truck on the expressway and it quit running. The toe truck has delivered the truck back to my house. The engine turns over but will not start. I shot gas into the engine with a spray bottle and the engine still would not start. Was going to check the coil for spark next. What to check first. Was thinking the problem could be the modulator or coil.
View 10 RepliesStarted the morning with oil pressure gauge dropping to 0, gave it a few minutes checked oil, it was fine. Restarted truck, pressure went back to normal. Drove about another 30 miles pressure gauge would drop but would rise when hit accelerator. I was driving about 60mph, gauge went back to 0, check engine light came on and within a matter of seconds, a whining noise started, pulled over before i could completely stop, it died, and now won't crank.
View 6 RepliesJust picked up a 1999 F-150 XL, 4.2L V6, 5-Speed. Spent half the day rewiring the headlights back to factory as a previous owner did a bunch of wiring that made absolutely no sense. (Foglights or KC lights?). Anyway, works great with the exception that the headlights turn on when I turn the selector to just parking lights. I removed all but the factory wires under the hood. I haven't been behind the dash yet to check the headlight switch and I was hoping to avoid doing so. A fuse or relay that may be causing the issue? I don't have a service manual yet so I haven't been able to identify all the fuses under the hood.
View 2 Replies97 F150 4x4 around 200k miles on it, Drove the truck to town today and it started making a screeching noise when I turn the wheel and moving at slow speed's It is not the typical Ball joint squeak, and they were replaced about 6 months ago. I also get a clicking squeak going down the road, everyone in a while from take of ill get a slide grinding or crunching noise. Also noticed that when taking a curve to the right i feel and hear a slight Bump but I don't when turning to the left/
Also it doesn't have the typical grinding noise of a bad unit bearing, there is a slight roar but Pretty sure that it is just the aggressive tire's... I am about to go out and Jack it up and have a look at it to see what it was. Also if I loosen the Cv nut on at the Hub that would show me if there was any play in the bearing correct? since the cv should keep the bearing's fairly tight even if they are worn?
Drove for 25 miles. Park, try to restart to park truck at other place. Truck start but very rough. Did drive for 20 yards and truck stop. Try to restart no way. I think I do not hear fuel pump when I turn key and gas pedal fill completely empty, no any force to move it. Should I assume fuel pump or should check some sensors first? I have P0420 for a few weeks, not source of this problem. Drove truck before with P0420 for years. No other code. Do we have PATS in keys? My truck is f250 99 LD. My pickup have PATS. How to check it?
View 5 RepliesI have a 1999 f250 super duty and an old problem has reoccurred , I start the truck and as I put on the windscreen wipers the truck cuts out?
View 6 RepliesLast night my boyfriend took a friend to the check cashing store, truck ran fine. shut it off, and when he came out the truck would not start. it cranks over but won't start. Took ignition coil off and had it tested but its fine. What else could be wrong or what can i do to try to get it to start again.
View 5 Replies1999 4.6L won't start after sitting a month. Ran fine before, now won't start. Cranks fine. Cannot hear fuel pump turn on when key is turned. Fuel pump fuse is good.
Fuel pump relay clicks a few times when key is turned. Is this normal? I am hoping it is the relay and not the pump. What should I check next? The wires at the pump? What should they read?
I've recently begun experiencing a problem with my truck dying immediately upon start up. It's a 99 5.4 and it will act like it's starting normally but then will idle down and die. If I gas it to 4000-5000 rpm it will eventually return to normal idle and run fine. At first it was once a week and then every day, usually upon the second start of the day but today it happened twice and I suspect it will become more frequent. What to check that doesn't involve a Ford Dealer?
View 3 Replies