Ford F-150 - 1997-2003 :: 1999 - After New Alternator When Headlights Turn On Truck Shuts Off?
Dec 22, 2012
I bought a 99 f350, that already had HID's in it, i found out i was running the wrong batters (weren't 800 cold crank) I just had to replace the alternator. Ever since the new alternator when i turn on my headlights my truck shuts off. IT fried my IDM and i just put a new IDM and 2 new batteries in it today. Thinking i had fixed the problem i drove around no issues, finally i was leaving someones house and turned on my lights, and truck shuts off!!! It restarts but now im trowing a code!!!! im guessing the HIDs are wired wrong and that's why its shutting down the truck but OEM IDM from ford is 1300$!!!!! brand new one installed today,
View 5 Replies
Advertisement
Just picked up a 1999 F-150 XL, 4.2L V6, 5-Speed. Spent half the day rewiring the headlights back to factory as a previous owner did a bunch of wiring that made absolutely no sense. (Foglights or KC lights?). Anyway, works great with the exception that the headlights turn on when I turn the selector to just parking lights. I removed all but the factory wires under the hood. I haven't been behind the dash yet to check the headlight switch and I was hoping to avoid doing so. A fuse or relay that may be causing the issue? I don't have a service manual yet so I haven't been able to identify all the fuses under the hood.
View 2 Replies
1999 f150 4.2l v6.. The anti theft system has kicked in and my truck won't turn over, the stereo won't turn on, the lights don't work. How can I fix this?
View 6 Replies
I have a 1999 f150. Its having a fuel problem i was driving and my truck just cut out on me. I have diag it as the fuel pump cause when I turn the key, I have no response from my pump.
View 2 Replies
I have a 99 7.3 F250. It dies when I slow down for a turn or for a stop sign. At highway speed, it 'surges' sometimes, and makes he whole truck jump. Also, there is a small leak in the tube connected to the turbo. Has 250k miles ......
View 1 Replies
Headed to town with the kids and my truck shuts off going down highway. I pull over and start it back up and make it to 30mph and shuts off again. This time it will not start. I have 1/4 tank of fuel, I first thought it maybe the issue inside the tank causing it to shut off. I get some diesel pour it in and it fires up for about 15 secs and shuts off. I pull the fuel filter, making sure o have fuel in the bowl. Start it up and it runs for about 10 sec. I then swap out the CPS. Same thing, runs about 20 and cuts off. I then call AAA because I am tired and ready to go home. I have it towed to my buddy's shop. He has not looked at it yet.
View 3 Replies
I have a 2001 f150 supercrew 4x4 and my headlights will not turn on and my parking lights will not turn off. I have replaced my headlight and multifunction switches and it did not fix my issue. I have auto lights and fog lights. Does not matter what position i have the light switch in the headlights do not come on. I try to go from bright to dim still no headlights. I pull the ftp still no headlights and the only way to turn off my parking lights is to disconnect the battery. This is my only ride and its really aggravating not being able to drive at night.
View 13 Replies
I use to have the 95 f150 and 94 danger ranger. And I tried logging on after about a year and wouldn't let me so i started a new one, But im in a 98 f150 now with a 5.4 and 4x4. No i saw that there was a guy with the same problem as me but the thread went no where. So one night out of the blue my head lights or high beams will turn on. But everything else will. And all fuses are good and i look at the manual and there's no replays to mess with. Even though i already did. So what i had to do to get home was hot wire the passenger side bulb and i got power to both lights. So whats going on do u think it can be the switch ?. My power with started acting up a few days before this but I don't know if that has anything to do with the head lights.
View 13 Replies
I have a 99 F150 4x4 with 5.4 Triton, 99xxx miles. I was towing my boat when the regulator in my alternator went bad. I drove the truck with the voltage being sporadic for about 10 miles until I could get to a parts store. While driving on the bad alternator, I started noticing a misfire. I replaced the alternator, battery and DPFE. I still have the misfire....but here is the kicker. The misfire only happens when the truck reaches operating temperature. Which, in my limited knowledge, eliminates a fouled plug, COP, bad injector and a vacuum leak. I've got no check engine light so I can't pull a code. The only thing I can think of is to clean the EGR?
View 10 Replies
2003 E-550 7.3L with IDM codes clear all code, do in injector buzz test P1276 and P1275. Start truck and SES light comes on. shut off truck code IDM code go to KOEF and have P1272, P1273, P1275, P1276. just replaced valve cover harness ohm wires to IDM put new IDM in. Truck shuts off while going down highway, turn key off then back on an usually starts on it own ....
View 5 Replies
A couple of weeks ago my truck wouldn't start. I replaced the crankshaft position sensor and when that didn't work I took it to a mechanic. At first it wouldn't start for him either. After move the truck inside he tried to crank it again and it fired right up. He said he didn't want to replace something if he wasn't sure what it was. Today it wouldn't start again. I bought some noid lights as suggested on line and tested one of the injector connectors and it did not light up. I realize that the injectors are not getting the needed "pulse". Whole thinking about what to do next I noticed that there was a broken wire. The wire is going to a really small looking box of some sort that is attached to the engine close to the injector at the front of the engine. What the wire is for and I am really not sure what to do next. I will try to upload a picture...
View 13 Replies
If I turn on my ignition switch and my gauges go to where they're supposed to be, the truck will crank. If I turn switch and , lets say gas needle for example, the needle goes to full then drops back to empty, the engine will turn over but will not crank.
View 2 Replies
Own a 1997 F-150, 4.6 L, 4 x 4. I know it's old but it's in very good body shape, has been undercoated for years. I've only had it for a year. This summer it began to not start (intermittently). The dash lights all come on but the starter will not engage. Brought to my local garage, he changed the starter and the ground cable from the battery.
Was ok for a few months and now it's beginning to do the same thing. Brought it back to him, can't find anything. He did say that the battery is a bit weak, the terminals are spotless (I keep them spotless, coat them with white grease). I measured the voltage with the engine stopped and with it running. Stopped, the voltage is 11.94, running it is 14.87. This clearly shows that the battery is weak.
My question is would this cause the starter to not engage after 4 or 5 turns of the key and then on the 6th try, the starter turns over? I don't want to spend more money ($ 450) the last time and have the same result. If it's possible it's the battery, I'll replace it no problem.
View 14 Replies
On my way to work today it was raining so I turned my head lights on. All the dash warning lights came on and my truck had zero throttle response. I quickly turned my lights off. The truck went right back to normal. I turned my lights back on and nothing happened.
View 12 Replies
I have a 1997 ford f150 V-6 4.2. My son was driving the truck on the expressway and it quit running. The toe truck has delivered the truck back to my house. The engine turns over but will not start. I shot gas into the engine with a spray bottle and the engine still would not start. Was going to check the coil for spark next. What to check first. Was thinking the problem could be the modulator or coil.
View 10 Replies
Started the morning with oil pressure gauge dropping to 0, gave it a few minutes checked oil, it was fine. Restarted truck, pressure went back to normal. Drove about another 30 miles pressure gauge would drop but would rise when hit accelerator. I was driving about 60mph, gauge went back to 0, check engine light came on and within a matter of seconds, a whining noise started, pulled over before i could completely stop, it died, and now won't crank.
View 6 Replies
My 1997 Mercury Sable has been having a rough time starting lately. It will turn over, but 2 out of 3 starts will be labored. It will crank, but hesitate and finally give enough to start. When I start it at night and turn on the headlights they dim and flicker until the engine has been running a bit.
This car was originally my wife's, and she can't remember the last time it has had it's battery replaced.
View 3 Replies
I have a 99 F150, with the 4.6, and my headlights just randomly quit. I checked all the fuses, and switched the MFS, and main headlight switch. All I have is my DRL's. I also checked for wires coming out of the plug-in on the column, but they seem good too. I'm just not sure where to go from here....
View 14 Replies
Well now I have to replace the multi function switch due to moving my steering wheel and the headlights sometimes working and turning signals not working. I saw a great video on youtube about changing a Multi Function Switch and it shows where the air bag needs to be removed. I was hoping that since my truck is an older 1997 F250 LD I wouldn't have to remove the airbag. Is there a way to do this w/out messing with the airbag on the 1997?
View 1 Replies
97 F150 4x4 around 200k miles on it, Drove the truck to town today and it started making a screeching noise when I turn the wheel and moving at slow speed's It is not the typical Ball joint squeak, and they were replaced about 6 months ago. I also get a clicking squeak going down the road, everyone in a while from take of ill get a slide grinding or crunching noise. Also noticed that when taking a curve to the right i feel and hear a slight Bump but I don't when turning to the left/
Also it doesn't have the typical grinding noise of a bad unit bearing, there is a slight roar but Pretty sure that it is just the aggressive tire's... I am about to go out and Jack it up and have a look at it to see what it was. Also if I loosen the Cv nut on at the Hub that would show me if there was any play in the bearing correct? since the cv should keep the bearing's fairly tight even if they are worn?
View 3 Replies
Last night my boyfriend took a friend to the check cashing store, truck ran fine. shut it off, and when he came out the truck would not start. it cranks over but won't start. Took ignition coil off and had it tested but its fine. What else could be wrong or what can i do to try to get it to start again.
View 5 Replies
