Ford F-150 - 1997-2003 :: 1998 - Power Mirror Switch Removal
May 22, 2013
How to remove power mirror switch 1998 f150, and where to buy if can't be cleaned up to work?
View 1 RepliesHow to remove power mirror switch 1998 f150, and where to buy if can't be cleaned up to work?
View 1 RepliesHow to remove the blower motor switch on my 99 F150 without breaking anything.
View 1 RepliesHow do you get to the oil pressure switch on a 1998 F150 4x4? I can see it over the top of the front axle but can't find any way to get my hand in to unplug the sensor wire. Do you have to unbolt and drop the axle down a couple of inches?
View 2 RepliesMy power window switch illumination has gone dark on one side of the switches....
View 3 RepliesI Probably don't have the right forum but I have searched without luck throughout the site looking to see if any one has swapped out their regular towing mirrors for a set of powerscope ones with power fold and telescopic functions. I also need to know if the wiring is going to already be in there for them , I know that the switch will also have to be replaced ,but is there any thing else? truck is 2013 f250 and this forum seems to have the most responses for that year and model.
View 7 RepliesI have read that cleaning or replacing the switch that adjusts the outside rear view mirror's will get rid of the erratic operation of these. Mine sometimes works and sometimes doesn't. How do I get the switch out of that panel? It doesn't look like the panel will pop out from the front.
View 2 RepliesIs it possible to remove the oil pan from a 1997 F150 with a 4.2, 2WD, without removing the engine? I seem to be reading that's it is possible (but difficult) for 4wd, but it can't be done for 2WD - is that correct?
View 4 Replies99 F-150 4x4. Any tips to get these rusty things separated from their homes? I've got the torsion keys unloaded and loose and the cross member loose. They will not budge. Aside from getting a bigger hammer and abusing the cross member till something gives. I don't like using the torch on heat treated components....
View 14 RepliesI have small red lenses to the outside of my mirrors I thought they were turn signal indicators but they do not light up Are they suppose to be indicators ? And if so , How do I get to the bulbs
View 2 RepliesWe have a 97 f150 4x4, I have pulled the transmission for repair. The rear main seal is not leaking however I have always replaced them when I pulled a tranny. This is a 5.4l and after removing the flywheel I noticed there is another cover around the crankshaft held on by 8mm bolts around the side and 2 oil pan bolts on the bottom. Does this cover come off to fully access the seal? Is there a gasket available for this cover or is silicone the standard?
View 1 RepliesI have a 97 F-150 Supercab XLT, 4X4, 4.6L W, 4r70W with electronic Overdrive, manual shift transfer case. I need to remove and replace the Torque Converter. My question is: Would it be easier to drop the transmission and transfer case or pull the engine loose and move it forward to get at the torque converter?
It is shifting in and out of overdrive to third, and then back into OD, and back into third erratically and for no apparent reason. It is also slipping intermittently in first from a dead stop and locking all at once, shifts hard then. When I first drive it the OD light does not flash and the OD off switch works, once it warms up good it starts shifting erratically and the OD off switch starts flashing, then the off switch does not work.
I did not get any codes returned on autozones little scanner and am taking it to the ford dealer for a full scan today to see if there might be any other damage or cause for this problem. The problems started when I blew a hose to the trans cooler in the radiator and lost fluid. I didn't notice the blown hose until it started slipping and pulled over, replaced the hose and fluid. Had problems ever since. I have cleaned the MAF sensor and replaced the ABS sensor in the differential so far.
What would be involved with removing the keyless entry system on my '02 F150 XLT so that I can install it into my '97 Explorer that I am fixing up. Is it integrated into the main computer or is it a totally separate system? If so where is it located?
The Expo already has power locks just not keyless (or at least I never received the key fob for it when I bought it) I have shaved the door lock cylinders and am fabricating handles to be hidden in the window moldings.
After removing the tires, I can't figure out how to remove the brake pads to change them. How to do it? Does the caliper have to come off? These are on the rear. 2001 F150 4X4...
View 1 RepliesThe right side mirror on my 97 f150 kind of sticks a little when I adjust it. Are there some gears or something that I could use a dry lubricant on, before I replace it?
View 1 RepliesI have a 1999 ford f150 4.6 engine and it has an exhaust leak but wondering what is the procedure to remove a broken bolt and the rest of the bolts on the manifold
View 2 RepliesI'm having a hard time trying to figure out to detach the cable from the pedal assembly. The place where the cable attaches is so hidden by various plates, pawls and springs that there is no access. Also the whole assembly is put together with rivets so there's no easy way of taking it apart. Is there some trick to getting the cable out?
Also, I need to find out exactly where the cable goes through the floor pan. I'm in the process of fixing the rust on this. My 2000 XLT 4x4 and the floor pan and rockers were so rusted that there was no evidence of where the cable went through the floor pan! I assume it's supposed to go through the channel right next to the inner rocker but where exactly? A simple measurement from the back edge of the A-pillar is all I need.
As I was laying under my truck today I noticed a drip under the front differential, it looks like the cover is leaking by the factory RTV gasket. This is the 00' F150. How hard is it to remove these things? It looks like the front cover mount makes it difficult....
View 3 RepliesHow to replace the turn signal bulb that is in the mirror on a 2001 f150 supercrew? My Haynes and Chiltons books dont say a thing about replacing this bulb.
View 1 RepliesI have an 02 f150 xl, I'm taking the stock head unit out and replacing it with a Pioneer 1900. I didn't buy a connector I'm just splicing the wires together, I know I shouldn't do it that way but it's to late now, what my problem is, there are three ground wires coming from the truck and the new head unit only has one ground, I just looked wiring diagrams up for both head units and that got pretty much everything done, just there are two speaker ground wires that are black and green, and then a regular black ground wire, I'm not sure if I should connect them all together or cap them separately, because I connected everything up and the head unit wouldn't turn on...
View 2 RepliesI have a 2001 f350 7.3 diesel, I am looking at switching out the air intake? Also, I have an issue with the code for a dual upper and lower generator fault.. I checked and only have one generator not a dual system.. The alternator is running strong at 14.1.. But I have noticed when I start it up it is down to 12..
View 1 RepliesHow does one get to the top mounting bolts to engine? Are special tools required? Is there an access plate?
View 6 Replies