Ford - Explorer :: No Air - AC Compressor Kicks On And Off
Jul 29, 2012
Got in one day fired it up and no air. Thought the freon was low (uses a can a year) come home put part of a can in compressor kick on and off like they do. Except this time it is blowing freon out somewhere under the intake like a poppet valve or something. Can't see where it is coming from it only does it for a split second and when the rpm's are up around 2500 or so. First thought was I have to much freon it. Vacuumed it out started all over and the same thing. What it could be is there a pressure relief valve under the intake some where?
View 7 Replies
Advertisement
Sunday afternoon I noticed my 97 F-150 4.2 5-Speed manual had a higher idle. When the AC compressor kicks in, the motor revs up higher than normal for about 4 secs then comes down a little. If you barely press the accelerator, I mean just gently touch it, the motor revs up for 4 secs. Dont have a tach, but just idling in neutral, is about 150 rpms more, and when AC compressor kicks in, rpms jump about 300 rpms i assume. Maybe vacuum, IAC??? Plugs, wires, and normal tune up done about 2400 miles ago.
View 2 Replies
Trucks compressor kicks on and off and won't stay on no cold air at all do i have a leak ? The truck came whit a new canister that mounts in front of the air box could it be that?
View 8 Replies
When I turn the control to heat the AC compressor kicks in. If turned to vent it does not kick in. Was this just a design flaw.
View 3 Replies
2012 F250 6.2L - AC will be working well with all fan speeds, then airflow just stops and compressor kicks out. Will run (or actually not run) that way for 4-5 minutes, then all of a sudden the compressor kicks in and airflow restarts, and air is nice and cold for another 10 minutes or so when it'll cycle off on its own again.
I've tried all different combinations of AC/MaxAC/fan speeds/and temp settings with no change in behavior. Only occurs in warm weather when AC is on; when just using heat the blower never changes on it's own and everything is great.
BTW - I've looked through all the HVAC FAQs and probably 200 different threads that come up under different search terms, but haven't seen this particular problem. If it was just lack of cooling but airflow didn't change, then it'd be easy. Or if it was only blower issues in certain speed settings, that's got lots of fixes too. But nothing where cooling and fan quit and restart on their own together that I've found.
View 14 Replies
Ok its a 96 explorer 4x4 and I just picked it up so I am learning all the things wrong as I go here. First off every now and then when the truck was almost to a stop the abs motor would kick in and make the abs noise. I checked the brakes and decided to change all 4 rotors and both sets of pads. I just push the fluid back up when I change pads instead of making a mess with bleeding and I am still getting the abs noise once in awhile. So could this be something wrong with the abs or should I sit there and bleed all 4? There is no lights on in the dash.
View 2 Replies
I thought originally I had a leak so I tested with dual gauges I'm getting 85 psi on low and high side, which I believe is good. So I tried grounding the low sensor, then high sensor, then both, then both just pulled out and any combo possible. Still not engaging. Switched out the relay, checked fuses, still not engaging. Tried taking shim out of compressor still nothing. Jumped the relay and it will engage and air comes out cold. What should I check next?
View 8 Replies
He has a 96 explorer and his ac compressor clutch was cycling on and off. So he went and bought 2 20 ounce cans of 134a and proceeded to add it to the evaporator service port. Of course a lot of it sprayed out side of it as it did not fit well (duh). So he has no Idea how much he actually got in there out of the 30 or so ounces he dispensed. He is laughing at himself with me on this. He says hi ahead of time
I have access to good gauges and a reclaimer and vacuum as I work sometimes for a residential ac guru. So what to do? I was thinking the evaporator should be changed out but I want a second opinion. Then vacuum and add new 134.
View 9 Replies
I haven't been on for a while but new issue my AC won't work the compressor is not seized it just wont come on checked all the fuses and tried to check the wiring but it is so short then it go's into the main wiring harness is there a way to see if it is the compressor or not some way to test it? It is on my 2002 explorer 4.0l vin "E" eddie bower.....
View 13 Replies
2000 Explorer Sport with 4.0L SOHC engine. When I turn on the A/C the clutch on the compressor cycles off and on every 10-15 seconds. The A/C cools and the gas charge is checked as OK. Is this normal?
View 1 Replies
I have a 1998 Explorer XLT V6 (4.0 SOHC) with an AC problem. The AC compressor will not turn on via normal means - turn to AC or AC Max, rotate temp to left. It hasn't been a problem as I never use the AC, but I'm fixing a few of the minor inconveniences (dash lamps, re-solder radio) and figured, why not look at the AC too.
A while back my mechanic said he used the Explorer to test his AC equipment and made sure the Freon was good. He said everything was working. I am assuming he was able to control the AC system from his tools under the hood. This tells me the system is good and the problem is related to the temperature control or a switch somewhere.
View 13 Replies
I have a 2000 explorer and the a/c stopped working. I recharged the a/c because freon was low per the gauges and then the compressor would kick on, then the pressure would drop in a matter of seconds and it kicked off again. Then the pressure goes back up, compressor kicks on again and this just keeps doing this over and over but never gets cold. What's wrong? My a/c worked last year.
View 6 Replies
I had a small leak in my 94 Explorer which was getting on the compressor pulley and being splattered around the engine compartment. The fluid was green like antifreeze--which didn't make sense; why would antifreeze be leaking from the air con compressor? But as an experiment, I got a non-AC belt and ran the truck without the compressor pulley turning, and the leak has stopped! The level in the coolant overflow tank has dropped an inch or two in the last 500 or so miles. Is it possible that antifreeze is getting into the air con system somehow, like through an internal leak in the heater core?
View 10 Replies
My wife has a 2010 Explorer 4.0 with 46000 miles on it. Yesterday the compressor started making a grinding noise when you turn the defrost on. It's only when the clutch kicks in. I'm hoping its something simple but, I fear its not.
View 8 Replies
I am wondering if the compressor for the air suspension is interchangeable with the one for air ride in the back of our 98 Windstar Limited. Ours needs to be replaced, and I am told that Ford no longer manufactures this part. Whether the same compressor was also used in another Ford model? I find it hard to believe that Ford would have designed and used the compressor in just the Windstar Limited, as very few of these were sold. Ford probably used the same compressor in another model also. Looking for diagrams or photos showing the comparable compressor in another model Ford.
View 1 Replies
90 Ranger with 5 speed manual, Every thing works as it should untill you put it into 5th, lift the clutch pedel and you fine, the tac responds and I asume your now in gear, but press on the gas pedel to give it a load. whhhhhiiiinnnkkk and the gear selector kicks back to netrual.Also I did remove an inspection panel from bottom center of the tranz and could see no sighns or damage, rounded or broken teeth.It's been sugested that it's just time to re do the clutch, if so why do all the other gear selections work without any problems?
2.9 v6 w/95k and I don't know the history.
View 5 Replies
I just bought this Ranger a really bad steering issue. When at low speeds, when I go to turn the steering "jumps/kicks." Then after I straighten out at the end of the turn it jumps in the direction that the steering wheel is being turned. This goes away at higher speeds (40+mph).
I was told by the seller that it needs a new steering pump, but my mechanic said that it was operating well. He noticed that the bearings were loose on the driver side and tightened them up. The problem went away. I just finished driving it for about 20 miles and the problem is back.
What do you think? Is there a way to easily shut off the p-steering to see if that is the problem? Is this a good idea?
View 4 Replies
Brakes seem fine even when the light comes on so I'm guessing its more a sensor issue but which sensor? From researching others posts about ABS lights, seems the sensor on top of the rear differential is a common culprit, but I'm not having an speedometer issues, which also seems to be related to that sensor. It used to be if the bump was big enough to kick the cruise control off, the ABS light popped on as well, but now it's only a moderate bump and it will come on. Shut the rig off, re-start and the ABS light clears, until the next bump that is.
View 6 Replies
I recently changed the front pads and rotors on my 2002 Ford Ranger 2wd and I'm having some troubles now. Occasionally when I'm pulling up to stop lights toward the end of my braking i can feel them cut out and the ABS kicks on. It's a very intermittent problem, and it only happens at low speeds. When I try to induce the fault it never happens, it only seems to after an extended period of braking going less than 10 mph. I'm very confused, and I was thinking about changing out my calipers unless know what might be happening.
View 1 Replies
Why does my truck seem to have mostly back brakes? When I slam up the back tires almost always chirp then the abs kicks in I haven't put a set of front brakes on it since I have had it and I've had it for 4 years....
View 1 Replies
Fuel mileage is terrible also but the truck really has no power. Running down the highway it kicks down just to pull a small incline. Check engine light is not on and there is no hessitation. The truck has 105k on it and i have put only 5k of those miles on. I did pull a couple plugs and they are autolites so plugs must have been changed at some point. Does this sound like a coil problem?
View 5 Replies
