Ford - Explorer :: 2008 - Noises After Tires Replaced?
Sep 29, 2014
My husband had my tires replaced this week. I drive a 2008 Ford Explorer.The car has been running fine - no problems what so ever. Now there is a sound when I turn or go quite slowly. We live on a street that is 25mph so we go slowly to start. I hear the sound while going straight at slower speeds, but also when turning - almost at full lock. It is difficult to describe the sound - not grinding and not screeching. Its almost as if I turned the wheel too far. The sound when running straight is lower maybe rubbing. The sound seems to be coming from the right side of the car. I can also feel the sound, but it isn't a strong vibration. My husband drove the car and said he felt nothing (of course - just like TV repair man syndrome). All 4 tires were replaced. Hubby checked the nuts - says they were alright.
View 5 Replies
Advertisement
Recently had my tire guy replace only my front tires on my 03 Ford Explorer. Drove it on the highway and it felt and sounded like the transmission and drive train were hitting each other. Having him now replace the rears as well. Hopefully, they will now be happy together. Fronts were new rears were worn and different tires. Will the new tires reset everything I screwed up?
View 7 Replies
Over New Years I had to engage the full-time 4x4 button on my 2003 Explorer 4WD. Shortly thereafter I started noticing an airplane propeller noise that comes and goes with acceleration. It's pretty loud. It has not affected mileage or dashboard engine indicators. Tires still have 40% left, not them. Have I ruined an axle or something? There is a rear end whine that Ford says is endemic to this model and year, but I think they are not related.
View 1 Replies
Background of the car, had a leak in my power steering pump that I had patched, and had the front wheel bearings replaced. whenever I get to about 40 mph, the tires sound quite loud, however they quiet around 45 and don't get loud again until about 65. However, when I go left around a bend the noise disappears. Also, maybe unrelated sometimes when I back up and then put it into drive, the car stalls out. I'm curious if this issue just means that I need to replace my power steering pump or if it might be something else? It's a 2005 ford Explorer.
View 1 Replies
2004 Ford Explorer Sports Trac.
Just recently when driving down any road, when I let go of the gas to slow down from any speed, there is a funny grinding noise coming from under the truck, the Speedo drops fast, but the RPM`s stays the same. Then at around 30-40 km/hr, it just stops. When I place it into 4x4, I don`t have the problem. Also, again just recently, when I put the truck into reverse, I get the same grinding noise from under the truck. I have to putt he truck into 4x4, and then I put it in reverse for it to work.
I don`t have the problem going into drive. Both problems don't happen all the time, it will go away for 2-3 days then ill have problems for a few days after. I Took the truck to the shop and they said its the tranny so I replaced with a brand new one thinking that is the problem, but After the Tranny was replaced its still making all the same noises. The grinding noise sounds like "ice in a grinder" or to that effect. I'm not sure whats wrong, and I'm getting frustrated at my truck.
View 3 Replies
I have a 2012 prius c with 72k miles. When i bought the car, it took a while for the fuel economy to increase. i drive 100 miles a day at 85mph and topped out at 52mpg. pretty damn good, if you ask me. im all interstate with very little city driving.
2 years later, its time to get new tires and ever since i changed them, my fuel economy has decreased to 45mpg.
View 15 Replies
My 2003 Ford Explorer, Eddie Bauer 4WD is making noises when the vehicle is at 2000RPMs. Below or above 2k RPM's no noise. Sounds like a very angry rattle snake. I seem to drive at speeds that require it to be at 2k RPM all the time. So needless to say as fall is approaching and I have the windows open, my hair is now falling out and not blowing in the fall air. I want to get it looked at, but don't know what to tell the mechanic to look for.
View 2 Replies
My 2000 Explorer has been having recently a very strange sound coming from the rear area, especially the rear right tire. You can hear a clicking sound from inside... its not a nut, bolt or anything stuck to the tires, its just a clicking sound that seems to come as the tire spins. Any known causes for this? Should I be extra worried?
View 2 Replies
I got two new Bridgestone ER300 Ecopia to replace two on the front. Trouble is after getting the tires fitted the car pulled to the left quite badly and my mpg's went down! Hmmm. I checked the tires in case a non low rolling resistance tire had been fitted by mistake, but they were correct. I then checked the pressures, which again were correct. So I guessed the tracking must have been out so booked it in with the dealers for checking. After a couple hours and a couple test drives later they advised the tracking is fine and the tires are fine. Odd.
Just filled up for the second time since the new tires and I'm struggling to get anywhere near 50 mpg! Even after a few long trips where I know from past experience that I could get mid 60's easily. I've inspected the tires closely and note that one of the new ones is made in Italy and the rest are from France. All the loadings, ratings and the type are the same, just made in a different factory and it is a slightly lighter colour compared to the French ones.
View 12 Replies
I recently replaced the 2 rear Pirelli 19"s on the back with Michelin Diamaris 4x4. I left the slightly worn 2 front Pirellis on thinking NO big deal. WRONG! By not replacing all 4 tires at the same time I noticed a "clunking" noise coming from under the vehicle while under 20mph.
After trouble shooting at 2 different dealerships the second one concluded that I need 2 new front tires. At first they thought that the left front drive shaft was bad but after installing a new one "clunk" was still there. Dealer removed 4 wheels/tires from a new Touareg and placed them on my '04 and "clunk" went away. My '04 has the 4 corner air suspension and locking differentials as well.
View 8 Replies
My practically new 1996 Explorer, 4wd, 4.0 with only 162,000 miles has developed what sounds like tires with agressive tread roar. The tires are Goodyear Wrangler RT/S with maybe 20,000 miles on them. I have had tie rods, upper and lower, shocks.The CV boots are like new. Front end was aligned when front end work was done. Tire wear pattern is normal.
Tires rotated last week (I hoped that would stop the roar, no affect). Transfer case and front diff. show no signs of lube leak. I am at the end of my wits as to what can cause the roar. At 30 MPH I have to turn up the volume on the radio to hear, at 60 the roar fades. A slight turn to the right on the steering wheel and the noise stops.
View 3 Replies
Every time I start my 1999 Ford Explorer It makes a loud beeping noise similar to seatbelt warning sound. Every 30 minutes or so it does it again as long as the vehicle stays running(even with all seatbelts fastened even if no one is sitting in the seat.
View 1 Replies
I've replaced the rear sensor and the two front ones on my 2002 Ltd, but the lights still on! It's driving me crazy...what now?
View 7 Replies
I have a friend who called me today, she has a 1999 Explorer Sport with over 200,000 miles on it. She said she was coming home the other day and as she was pulling into her driveway she heard a clunk then the steering kind of locked up, and it felt like a tire was dragging. She moved the truck later and said that it goes forward and backwards fine but grabs and skids while trying to turn.
She called her local mech, and he thought the diff could have given out on her and is basically acting like a locked diff rather than open.. I think the front axle must have somehow engaged, and is stuck.. So my question is this, how does the front axle on a explorer engage.. I know on Jeeps and Chevys there is an actuator that moves an arm that moves a sleeve that engages both sides of the axle. Does ford work the same way?? It would seem to me that if the truck is going front and back fine the diff itself should be ok?? The xfer case was replaced about 3 years ago.
View 3 Replies
My son has a 2002 Explorer 4WD EB that needed new valve and intake manifold gaskets. I pulled it apart this weekend (battery disconnected) and replaced (don't get me started on the passenger valve cover with that *@&$^ EGR valve in the way). He's also had issues with the key being removable from the ignition when the vehicle is still running (worn key and/or cylinder most likely). So when I put his key in to test my gasket job, it won't go in all the way. After much trial and effort, I call a mobile locksmith who has to drill out the old cylinder and rekey/replace it (keyed to use the same, single old key we have).
Now, the cylinder turns happily with the old key. In the "Run" position, all the dash lights come on as they should, but turning then to "Start", caused a loud single click, then the dash goes out, and the engine never even tries to start. Then, nothing electrical in the car works unless I disconnect the battery for about 10 mins, then reconnect. Upon trying to start, the same thing happens (good dash lights at "Run", then single loud click from the engine compartment, then nothing. It seems maybe the PAT has lost its memory of the old key?
I watched and assisted the locksmith put the cylinder and PATS antenna back together, so I know connections/placement of that is good. At this point, I'm about to lose all the money I saved on the gasket job to the freakin' ignition issue.
View 9 Replies
I had to replace the temp gauge in my 1996 Explorer. I also replaced the sending unit. Now, it is overheating, badly. I replaced the thermostat, twice. Filled the coolant and removed the air in the system. It seems to get good water flow, and there are no coolant leaks. The radiator looks clean, and the cap looks ok. But, as soon as the engine warms up, it goes right past the midline on the gauge all the way to hot - at idle. It gets worse if I drive it. I have grounded the gauge and it seems to be working fine. What could the problem be?
View 5 Replies
2001 Sport trac, we are throwing a large leak evap code. The check fuel cap light came on and went out after replacing the cap, but we are still getting the code. Is there a known problem area to look at or is it a job for the smoke machine?
View 2 Replies
Had the torque converter replaced twice on my 2007 Explorer Limited last December. Ford dealer did it once and then there were still issues so they had to replace it again. All seemed fishy to me.
Now a new issue that sounds like driving over rumble strips. Torque converter?
View 1 Replies
Problem started when the fuel supply was low, she had to floorboard it to get on the interstate, keep getting cel, misfire #4.....I replaced fuel filter, had a little water causing the plug to arc....had a mechanic replace the plug.....at startup cold, cel is off and it doesn't miss, after it warms up, light comes back on and starts to miss. I have ran every type of fuel cleaner in it, even used a three step cleaner for throttle body, vacuum system, and tank. I just poured sea foam into the tank and trying that, I noticed a gurgling noise when I removed the gas cap. I'm thinking #4 injector is stopped up.. I recently replaced all the coil boots.....kept getting condensation in the boot (she has been washing the underside at the car wash).....the truck has the 4.6 and has 85,000 miles, it is an 07 sport trac.....
View 2 Replies
I bought a 2008 5.4l xlt about a year ago now. For the first time I took it on a trail that had a little mud. With my incredible wisdom, I decided to park the truck rather than wash it off. The next day the engine started making weird noises when I turned the steering wheel. After washing the truck it still made noises so I opened the hood. THE ENTIRE engine compartment is covered in a serious amount of mud. I feel that this has to be what started the noises when I turn. Mud dried in the wrong place? The noise sounds like a whine and its pitch matches the engine rpm until over 2500 where I don't really hear it anymore. Is there a way to flush the engine compartment?
View 7 Replies
Strange noise from what sounds like the suspension when I accelerate and then when I turn also. Truck was in Hawaii so that might have something to do with it. How do I get these noises to stop?
View 1 Replies
