Ford - Explorer :: 2004 - Anti-lock Brake Light Comes On
Jan 22, 2012
I have a 2004 Explorer that the anti-lock brake light comes on. Brakes work fine. What to look for first ?
View 4 RepliesI have a 2004 Explorer that the anti-lock brake light comes on. Brakes work fine. What to look for first ?
View 4 RepliesWell I have a weird thing going on with the anti lock brakes. Its normally more noticeable when its cold. Coming to a slow stop you can feel the anti lock brakes pulsing slightly or more noticeably if you hit a bump braking at slow speed. The only mods to the truck are 285/70/17 inch tires and a leveling kit. Not sure whats going on with it, but i thought i should check here before getting my wallet lightened by the dealership.
View 2 RepliesI have a '99 E350 van that I am feeling a light anti-lock brake pulse in the pedal when I am rolling to a slow stop under light braking. Braking doesn't seem to be affected, but it doesn't feel right. I tried locking up the brakes and didn't feel any anti-lock pulse...seems backwards.
View 1 RepliesI was driving my Dad's Camry in the rain and at one stop I heard what sounded like the anti-lock brake noise and vibration. Heard it again when stopping on leaves. Didn't think much of it until I started noticing the same noise when the road was dry and clear. All the stops were gradual, from under 30 mph. The car stops fine, less the noise. I hear the noise approx 1 stop of 3 or 4 regardless of road conditions or weather.
What's the cause? Since it relates to the braking system is this something I should have the shop look at asap? This is a 2005 but with under 60,000 miles. Has been well maintained.
How to reset the Anti Theft on my explorer? The light is flashing fast and the engine won't start. Without the anti theft being reset the truck won't start. Been checking around to find an answer but can't find one...
View 7 RepliesI have a 2002 ford f150 I changed the turn signal switch and now the theft light is on and it won't start...
View 1 RepliesMy 2000 Ford Ranger 4x4 truck's anti-lock braking system is not working properly. When I slow down for a stop my anti-lock brakes kick in every time for about 1 or 2 seconds. What can I do to stop this from happening.
View 2 RepliesI have a 2011 F350, with a 4 inch Rancho Suspension lift. Ever since the lift kit was installed, more commonly when turning to the left than right, the anti lock brakes come on and the traction control light comes on/flashes. without even stepping on brake pedal.
It seems to happen when the wheel is at about 80% of max turning, about 15mph. Both wheel hubs and sensors have been replaced. road tested with Ford tech , he watched the speed sensor input while hooked to the computer and all sensor are reading correctly.
Today I went in a constant circle and can make it do it non stop, and when you try to press the brake pedal while the anti-lock (grinding/chattering) noise is happening, it only gets louder.
Problems my truck seems to be having for one thing sometimes when I'm going thru the gears (6 speed manual) the truck won't wind up all the way it's like it is rev limiting at about 2000 RPMS, been doing that for a while , it does that most of the time but not always. Problem #2 the anti lock lite stays on in the cluster, and just yesterday the service engine soon lite is now on, my truck is a 1999 F250 7.3 6speed manual with 77000 miles on it ...
View 1 RepliesMy anti-lock brakes keep activating when i am slowing down from a speed above 10 mph once i reach a mphh. I have just installed koni sports on the front and bg springs all around with 20mm wheels spacers in the rear. The sound is coming from the driver side wheel and i can feel the brake pedal reacting in the way it does when the anti-lock brakes are activating. I haven't had a chance to take the wheel back of and check the sensors and wires.
It makes a grinding and popping kind of noise, which again remind me of anti-lock brakes.
The anti-lock alert indicator of my 2000 Buick Century goes off and on every day or so in warm weather; seemed that it stayed on much longer in cold weather. Braking is fine, no other alerts associated with braking. Is this a common problem? Might this be oxidation on terminal connectors of wheel sensors since it's so intermittent??
View 2 RepliesHow do I know if my 1995 Chevy Lumina has anti-lock brakes (ABS)???
View 2 RepliesI have a 2000 silverado. When I come to a stop, sometimes the anti-lock brakes will kick in. it makes that all too familiar grinding/clicking sound that I hear all winter. However, it is happening during the summer/fall. It doesn't happen every time I brake. It seems to happen most when I am coming to a stop on an uphill or downhill grade, or when I am stopping while turning. It doesn't happen the whole time while braking, just right at the end before the vehicle stops. It also seems to happen more frequently when it is warmer out. The tires don't skid while it is stopping either, which I guess is supposed to happen. It is a concern since it does take me a bit longer to stop when the anti-lock is going, and I never can predict when it will happen.
View 3 RepliesMy anti lock warning comes on after 1 mile of driving. If I test the anti lock on ice during the first mile the system works fine, around 1 mile the lamp lights.
View 7 RepliesMy girlfriend just bought a 98 XLT AWD 4.0. does have a few problems.
First, the brake light is on (on the dash). all the lines are good, but the front pads need to be changed. if i take off hard, the brake light goes out for a bit.
Second, had a CEL. P0743, torque converter clutch circuit blah blah. also, the o/d light flashes constantly.
The trans shifts fine, even under WOT. also goes into o/d with no problems, and the button works.
I recently had my wheel hub and bearing replaced. The mechanic said I might hear a little noise with the brakes but they'd work. Turns out that noise is the Anti-lock braking system engaging every time I use the brakes. It happens when the car speed gets low, maybe 5-15 mph. Also, if I'm driving slow in a parking lot or something, and let off the gas, that change in speed sets the ABS system on too, without my foot being on the brake pedal.
I've also noticed sometimes when the weather is very cold, the ABS light will go on and the ABS brakes won't work; just regular brakes. Is this something that I'd be able to solve at home? Could I possibly bleed the brake lines to check for any air ( although braking seems fine ) , busted fuse for the system, anything else to check before asking the mechanic?
I am in desperate need of a brake light switch for my 2003 Ford Explorer XLT..I have find a dozen but none seem to look like they fit. The current one is a 2 prong Pollak part. I have only seen 4 or 5 prong. The most popular switch that comes up is the motorcraft parts..Doesn't fit!!!
View 14 RepliesMy 2004 explorer honks 3 times on lock and 4 times on unlock when you just press the remote once.
View 5 RepliesTrying methods found elsewhere on this site not working anymore. No matter how much wd-40 and door slamming I do, I am getting the 4 short honks on lock and 2 on unlock. No door ajar light and interior lights go off as normal so it doesn't seem to be door open sensor.
View 9 RepliesIt only does it when it is fairly cold out and when it sits overnight. I will get into my 2000 4.0 Explorer and when I put my foot on the brake my right side turn signal comes on, it doesn't flash it just comes on and stays on. When I let off the brake it goes out. It will do it maybe four or five times and then work fine all day. Its just the right side and the indicator on the dash comes on too. I haven't looked at a wiring diagram yet to see if there is a connection between the two.
View 7 RepliesI have a 99 F150 4x4 (5.4) 173k miles. I bought the truck from family about 6 months ago and from time to time if you stepped on the brake pedal to hard (not locking up, but pretty hard) it would feel like the passenger rear tire would lock up. He said that there was an issue with the automatic adjuster on that side. Here lately the ABS light on the dash has been coming on every couple of days, of course on the next restart it's off. Could these two issues be related?
View 3 Replies