Ford - Explorer :: 2004 4.0 - 4x4 Will Not Move In 2 Wheel Drive Or 4Hi
Jan 13, 2015
My problem is that my explorer, 130,000 miles will not engage in any gear while in 2 wheel drive or 4H. Truck will only engage in 4L. And when it does engage in 4L it hesitates and jumps into gear, especially drive. Also takes some doing to get it out of 4L. While truck is in 2 wheel and in drive, my speedometer reads about 20 mph with truck not moving. It does not do it in reverse. Also gears will grind when I attempt to put vehicle back in park because of it registering that I'm doing 20. Dropped pan and changed tranny fluid and filter. No change. Also not hearing transfer case engaging while I shift between auto, 4H and 4L. Really need this truck fixed ASAP, and need to do repairs myself.
View 2 Replies
Advertisement
My boyfriend bought a 1999 ford explorer, he put about 2,000 miles on it in four months... I believe it now has roughly 110,000... Now the other day, he was pulling out and shifted from reverse to drive, we heard like a loud clunk/thump noise... It shifts into drive, and revs but won't move, it feels like neutral... If you shift to second, first, or reverse it's fine... Tranny fluid is good... O/D is always engaged...
View 3 Replies
Is there a way to disable the auto 4 wheel drive on a 98 Explorer for testing purposes? I believe there is a module but can't remember where it's located and I don't know if it can be temporarily disabled.
View 10 Replies
Do a 2004 Saturn view front wheel drive transmission will fit in place of an all wheel drive...
View 1 Replies
I have a 2004 Explorer 4.0 4x4 with 130,000 miles. The vehicle will not move while in 2 WD or in 4H. No engagement at all. However it will engage in 4L (reverse and drive). It also makes no sound from transfer case when I try to shift from auto 4x4 to 4H. 4L engages and is a bitch to get out of 4L once it's engaged. Changed tranny fluid and filter with no change. Really need this truck fixed, and by me if at all possible.
View 3 Replies
Yesterday I noticed when I pushed the 4x4 high and the 4x4 low button nothing happened, there was no light indicator coming on at the dash, and also there was no differece in gears when 4x4 low was selected, is there an easy fix to this like possible a fuse blown?
View 14 Replies
So my Push Button 4 wheel drive wont engage. The light on the dash wont light up and it doesn't shift into 4x4. Where to start? I would like to check the simple stuff first. O and my heat only gets hot when im giving the vehicle gas. This is all on a 2003 Ford Explorer.
View 2 Replies
I have an 08' 4x4 with the 5.4. When i back out of a parking spot for example the rear end "Clunks" when i but it in drive and give it gas to move. Also does the same when your driving fwd, put it in reverse and try to back up. I had a 98' 4x4 ranger that had the same noise under same circumstances and it was recalled and repaired.
View 12 Replies
Long delay bringing new travel trailer home last week. Shift cable not placed properly in retainer during assembly (there is NO way it popped out) and it was resting on exhaust manifold. Evidently towing camper made enough heat to burn through the shielding and truck trans would not move out of drive.
The good news is that I could climb under (getting too old for that stuff!) and put it into gear/park by hand. But of course I didn't know that for the first 4 hours.
View 8 Replies
Alright so a friend of mine has a Ford Explore with the little switch on the dash for auto 4 wheel, high 4 wheel, and low 4 wheel. When it is in Auto it has no issues drives fine and good. As soon as you turn it to 4 wheels high and start to go all you get is a loud clunking noise constantly. Another friend had a similair issue with an AWD explorer that we just pulled the front drive shaft and it seemed to solve the issue. How would I test the driveshaft to see if that's the issue.
View 2 Replies
I think it's possessed! My sisters vehicle, a 2002 Explorer with a 4.0 V-6, automatic, 2 wheel drive will just shut off. At first it acted like it would vapor lock. But it would start right away. then the a while later, (several months), it got where it would drop rpms and the engine shudders, sometimes not dying.
When this first started, the throttle body was cleaned, a new air filter installed, fuel pressure checked. Everything checked out and for a few days it ran fine. Then it started all over again. There has never been a code thrown. All of this goes on only when the ambient temp is above 70 deg.'s. below 70 deg.'s it runs perfect.
Last week it went to the mechanic again and a new crank speed sensor, fuel pump, and diagnostic done. He could not find anything wrong any where. Took it for a test drive and it dyed on the mechanic. Still no codes. What the problem might be? Every Mechanic that has looked at it has gave up, one even saying, " it's possessed."
View 14 Replies
2004 Explorer 4WD XLT 4.0 6cyl - Mileage is 117,000 - Check Engine Light came on - Pulled the code of PO193. Had the Fuel Pressure Sensor changed, Plugs and wires and check engine light is still on after being re-set several times? Car is stalling at times when going from park to drive - It seems to idle ok in park but, when in drive at a red light, the tac will bounce a little and it seems like it's not getting enough fuel and will stall out at anytime. Is there a fuel filer that can be changed? Should I have the fuel injection checked and cleaned along with a fuel filter. Seems to be getting poor gas mileage.
View 1 Replies
I have read through the folders and many websites on 4x4 problems. My problem has to deal with my four wheel drive not wanting to engage. It has nothing to do with the front end or solenoids. When I put it into 4x4, hi or low it will not send any power to my transfer case motor. It wont even illuminate any lights on the selector switch. I have checked all fuses and replaced any relays that have to do with the 4x4. Where I should go with this?
View 7 Replies
I just got myself a 1993 ford explorer and the damn thing won't drive forward but it will drive in reverse. What could be the problem?? I've already drained the Transmission Fluid out & refilled it. My friend told me it is most likely the Neutral Safety Switch but I have no clue where it is located. I will be honest I have absolutely no clue about vehicles.
View 1 Replies
I have a 2006 F150 4x4 5.4L 43000mi. My four wheel drive is not working. I have the dash mounted switch to switch it into 4x4 Hi 4x4 Low. When I put the switch into 4x4 Hi nothing happens. 4x4 does not engage, and the 4x4 Hi light on the dash does not illuminate. I get the same symptom when the switch is placed into 4x4 Low. I have checked all of the 4x4 fuses and they are ok. I checked all of the vacuum lines to the hubs and they appear to be intact. What I should check next? What would cause this?
View 14 Replies
I recently replaced the oil seal on the front differential where the front drive shaft connects to the diff. I believe it is called the pinion oil seal. I had to remove the drive shaft to do the job. Got the oil seal in place and then slipped the u-joint yoke on and hand threaded the retainer nut on to get it started. I did mark the relative position of the drive shaft to the front yoke and the rear yoke. I had previously noted that the retaining nut, before I took it off had about 2.5 threads showing. I had to remove it with an impact wrench.
So...I used the impact wrench to put it back on with about the same number of threads showing. I then reinstalled the little short fronmt drive shaft...the one that comes out of the transfer case. I got the front of it on to the pinion output on the front diff...and then had to reattach it to the transfer case end which, by the way an interesting affair with a sort of metal cone that is attached by 6 8mm fine threaded bolts about 2.5 or 3 inches long. Got all that done with much grunting an groaning - I'm laying on the ground - SO the oil, leak is fixed but now ...
There is a vibration at around 40 mph and higher. like something is out of balance. did i damage the front diff pinion bearing by using an impact wrench? this vibration occurs in 2 wheel drive. as i understand it the front drive shaft doesn't even turn when in 2 wheel drive. my question is does the front diff gears spin when in 2 wheel drive? perhaps the u-joint is bad on the front drive shaft? just a bit baffled. when the speed drops to below 40mph the vibration goes away...
View 2 Replies
I have a 2005 F-150 with ESOF. When I turn the switch to 4x4 or 4low the lights on the dash will turn on but the front tires will not turn. I checked all the fuses and they were good. I'm not very familiar with this 4x4 system, what the issue is or on how to fix it?
View 3 Replies
I have a 2004 Explorer 4.0L with 190,000 miles. My wife was driving it and the vehicle stopped moving. Sounds like the torque converter whining and will not drive in any gear or 4wd.
View 1 Replies
I have a 07 f150 and while driving I have a vibration only in 4wheel drive high but not a bad one but when I take my foot off the throttle it gets worse as well as a rumbling sound!! this is only after a 6" lift was installed it seems and I have replaced both front drive shaft u joints thinking that was the problem but didn't solve the problem....
View 2 Replies
My 2004 Ford Ranger has 220,000 miles, runs great, and when I bought it this summer the 4 wheel drive worked great. Starting when the weather got cold when I engage the 4 wheel drive (no lockouts electronic engagement). I will drive and it will kick in and out of 4 wheel drive when it starts to slip or I have to accelerate.
When the 4 wheel drive kicks out I will let off the gas then it will engage again on its own, but will slip out again when on ice or I start to slip. When the 4 wheel drive engages it does NOT make any strange sounds, no clunking or nothing, it engages smoothly, and disengages properly.
What it could be? a connection? Any way to fix or diagnose the problem? I have been told that it probably is not the transfer case, because if it were it would not engage or stay in 4 wheel drive at all.
View 11 Replies
My 2005 RX330 has 140,000 kms...and I am now witnessing frequent periods of hard steering. I even sometimes find that after I turn a corner, the steering wheel doesn't return back to straight as I move through the turn - I have to forcefully return the steering back to straight steering. There is plenty of power steering fluid, and there are no abnormal whining noises from the power steering assembly. And since the ease of power steering does still work...I suspect that a ball joint needs looked at.
View 14 Replies
