Ford - Explorer :: 2003 Whine At Rear End Between 50 To 65 MPH
Feb 13, 2013
I have a 2003 explorer with 6000 original miles, the truck was only used to go to the corner store by my past in laws, the tires which I have just replaced were the original Michelin with the date code 0303, the problem I am having is a fairly loud whine/hum during acceleration between 50mph and 65mph, I live in the Florida keys and trust worth mechanics are far and few between so I brought it to my Ford dealer which I buy body parts from all the time, after a test drive the service adviser said that they will have to remove the pumpkin put it on the bench and inspect it, I said ok, they called me back into the shop and showed me the unit, the tech said that I had metal filings in the unit and it was out of alignment, I saw the filings, which included the ring, pinion all inner bearings, the two outer shaft bearings and the two dust seals and oil, I verified this and the price seams to be right....my question is the labor they want to charge me 8 hrs to do the work. The rear end is a 355, not Limited and not traction.
View 3 Replies
Advertisement
I have a 2003 explorer where the pinion bearing has started to go, now the rear is starting to whine. the truck is a 2003, its a limited, with the 4.6 v8 in it. I would like to swap the rear with another used one, rather than rebuild the diff. the car is AWD, has a hitch receiver so I would imagine it has the tow package, my question is could I grab a rear out of a non AWD explorer, or one that had the 4.0 in front of it? something with the same gear ratio but out of a similar, non exact car, it has the advancetrac in it with the push button on the center console.
View 3 Replies
Well i picked up a 96 4x4 with the 4.0 a few weeks ago and been fixing stuff weekly that i find wrong. One thing i noticed was the rear diff was leaky but couldn't get the fill plug out so left if for now. Last night my wife was on interstate and it just started making a loud noise so she pulls over calls me. I get there and drive it and it makes a woowoowoo noise and it got louder as speed increased. She was 3 miles from the exit so i drove it about 15-20 to get it off interstate than another 2 miles to her sisters. We let it sit for a few hours and found a flatbed to haul it home, and when we finally got home i drove it off the flat bed and now it was making a loud clunky noise. Parked it in drive till today. Cracked open the rear and no fluid came out.
Inspecting all the gears looked good no metal in bottom so i went and got a new rear cover and 3 qt. of fluid. Put it back together and the woowoowoo was still there but seemed to slowly go away as i drove it around the block. So what else could be going on here or do i need to drive it and warm up the fluid so it circulates? I also noticed a sheeee sound like metal on metal when braking but i changed all 4 rotors and both pads last week but i noticed the brakes in the rear that look like drum brakes was bare but i assume that is only for the ebrake so didn't bother changing them yet. Could those be hitting the inside of the rotor and making the metal to metal noise?
View 14 Replies
I have an '03 Ford Explorer (V8) and recently had a rebuilt engine installed (at 135,000 miles). As soon as I got the car back, the engine whined and it's getting louder. The whine starts immediately but it louder when the accelerator is pressed. The sound reminds me of a car with bad power steering, but it's so much louder and doesn't correlate to turning the wheel, but pressing the gas pedal.
View 6 Replies
I've got a 2003 F150 4x4 supercrew that's got a 9.75" rear end with 3.73 gears. I just replaced clutch packs and spider gear set 2 weeks ago. The last day or two I have noticed that when I make sharp turns that it get a whining like spinning noise. It sounds to me like the spider gears are spinning. It only does it when making sharp turns. There is no noise going down the highway or normal driver. I have noticed at times I get a little shutter when I go to take off or back up. Kinda feels like a brake is hanging. I put friction modifier in when I did the clutch packs and everything. Maybe not enough?
View 5 Replies
I have a constant whine going down the road with foot on the gas. Back off and it quiets up. At 2-3 MPH i think i can here a " tick- tick". Took the drive shaft off, wheels off ground, cover off and oil out. Spin wheel and i can hear a tick - tick, I think around the pinion bearing. No play up and down or in and out, but it appears to have 2-3 times the backlash i would expect. I used the screw driver- stethoscope--- still think its the bearing. This is a 9.75 axle. What kind of luck would I have pulling the yoke off and going in from the front without removing axles halves and ring gear? I thought I had read that here before. Never done one that way .
View 2 Replies
When I am coasting in reverse or forward at low speed e.g. 5 mph, I am hearing a whine that seems to be coming from the rear axle.
Usually it happens just after I have shifted OUT of gear (it's a manual transmission).
I uploaded the sound as a WAV file to here: Note! I recommend that you disable flash before going to this [URL]......
When I speed up the whine just rises in pitch and it's making my ears ring. What that sound might be? Maybe I just need some "axle grease" or something?
View 4 Replies
I recently had to sell my 1990 Ford Bronco (hence my name) because it failed emissions six times and I gave up. I bought a 2004 Explorer 4X4 with 93K. I am very happy with my new truck. It is very clean and looks like new. I only noticed one thing - a slight whine from the rear end at 55 mph when I am on the gas. It doesn't really sound like a bearing. I read somewhere that Ford put a lighter weight gear oil in the diffs to increase fuel economy, and if you put in a heavier grade then the whine will go away. Is this true? If so, what should I use? The whine is barely noticeable and doesn't bother me, but if it could be eliminated easily by changing the oil I'd do it. I also read that someone did this and a week later the diff blew up. I'd rather have a very slight whine than a diff blowing up! What should I do here?
View 14 Replies
2007 sport trac w/ V8 4.6L
While driving down the road a slight whine is heard. Almost from the right rear but not sure. I shut the truck off at 30 mph in neutral and still have a whine. My tires are worn well below spec and I am starting to think the "whine" is a tire noise. My low air light was on and I aired them up to spec and the whine seemed louder today on the highway. I love this truck, but if its gonna turn into a money pit. DOWN THE ROAD IT GOES.
Also notice my transfer case appears to be wet with oil and can not see where it is coming from. I have had the vehicle a year.
View 3 Replies
Just purchased my first Explorer. It's a 2003 Explorer XLS. Only problem with it is that both rear door Windows don't work. The dealership where I purchased the vehicle immediately threw a new drivers side door switch in it to no avail. Now they want to throw two new window regulators in it. Before they do that though I am going to do some checking to see if they are getting power. Both front Windows work just fine.
View 6 Replies
Ford Explorer has been making horrible noise (constant whine when accelerator is pressed)... The mechanic said he found metal in the power steering fluid and told me we need to replace the power steering pump and the rack & pinion system. Is he right about this? He said you can't replace one without the other... I've done a little research and I think we can get away with a new pump.
View 2 Replies
I had heard clunking when hard accelerating or hard stopping my 2003 Explorer, also heard it from Park to Reverse/Drive. I suspected u-joints, was correct, those were replaced.
After I received my car back I noticed the clunk was louder when hard accelerating or hard stopping; again from Park to Reverse/Drive. I suspected rear differential. I called my mechanic who said they noticed some play in the rear end - a little loose, that the noise would be noticeable...but that if it were him he wouldn't worry about it. He said the drive shaft was tight, that I wasn't in danger of it falling out, etc.
These are the only symptoms I have that something is wrong with the SUV. Just that clunk. If I come off slow from a stop and not hit the gas, there is no clunk. If I do not hard stop, again I can avoid the clunk. The vehicle does not vibrate or make noise on the freeway, shifts well between gears.
I was going to have my mechanic open the rear end up and see what needed to be replaced when the cold weather brakes. In the meantime, is there anything I need to be keeping an eye on, or something else I should check? My mechanic said the checked it over and couldn't find any other problems. I just want to be prepared for expenses.
It's a 2W, not 4WD. I had all the fluids done, a drain and refill on rear. Not sure if that's important to know or not.
View 3 Replies
Ford Explorer has been making horrible noise (constant whine when accelerator is pressed)... The mechanic said he found metal in the power steering fluid and told me we need to replace the power steering pump and the rack & pinion system. Is he right about this? He said you can't replace one without the other... I've done a little research and I think we can get away with a new pump.
View 4 Replies
First off, I just traded another vehicle for a 97 mountaineer, 5.0 v8 AWD with about 171k miles on it. Runs and drives real nice, but on occasion under normal acceleration i get a slight shudder when it shifts into high gear. The tranny fluid does look and smell a bit old, but not burnt. I plan on changing it if you think it would fix the problem and not cause more.
Also, I think the ball joints are shot. The camber is in on the front tires and i get some pretty good clunks when I go over bumps in the road. Steering wheel is tight. I jacked it up and tried wiggling the tires but i couldn't get them to move like that. I'm assuming ball joints still though right? And if so, how hard of a job is that for a DIY'er?
Also i noticed a bit of a whine coming from under the truck when turning into my driveway. Transfer case I'm assuming? What could cause a slight whine and how do i fix it? I plan on changing the fluid in that too.
View 14 Replies
I own a 2003 Explorer, 4.0 v6, w/93k. When turning either direction from a stop I get a shudder from the rear end. Ford has issue tsb # 17717 but I cannot fix the fix, only a description of the problem. Where can I find a fix I wondered?
View 2 Replies
I am thinking of purchasing a 2003 Ford Explorer XLT 4x4 as my winter vehicle. The car only has 92,000 miles on it. I test drove it, and it seems to run great! The only issue (visibly) with the car is that the rear drivers side door is stuck. There is a dent below the door handle, and the door will not open from the inside of the car, or from the outside. The dent does not look major, and it seems to me that if I can get the door open, I could repair the latch/locking mechanism.
I don't want to buy the car if the only way to repair the door is to spend a ton of money at a body shop. Below are the pictures of the outside of the door. Hopefully the image links work.
I think it is the locking mechanism that is broken. The dent isn't causing the door to be stuck. The power door locks work, and I can manually lock/unlock the rear door. However, even when unlocked, the door will not open from inside or outside the vehicle. It's as though the door is "stuck" because the lock doesn't disengage.
View 3 Replies
My wife's 2003 sportrac has developed a problem. The left rear turn signal brake light will not work. The tail light does. When you turn on the left turn signal the front bulb and the dash light flashes real fast. I have changed both, the front and rear bulbs with no luck. I've read on here about the tilt steering column deal. I have moved the steering column while operating the turn signal with no change.
View 4 Replies
I have a 2003 Explorer EB that on deceleration of all speeds, the drivers side rear axle is popping or clicking. Could this be a CV joint? It does not happen on acceleration.
View 3 Replies
There's a high pitched whine type noise coming from my Mass Airflow Sensor. I can get it to go away temporarily if I goose the gas pedal, but it comes back after a minute or two. Has not affected drive-ability, but it's pretty annoying. It sounds like the hot wire is probably vibrating. Is there any fix for it, or do I have to replace the sensor to get rid of it?? Have tried cleaning it, but that did not work.
View 6 Replies
I had the rear axle seals replaced less than 1000 miles ago. Now the axle is getting whiny. First I thought maybe that the tires made noise but now I'm pretty convinced it comes from the axle.
With a seal replacement, what do they do that might impact the axle - over tighten the bearings?
I also had the rear diff fluid replaced - perhaps they put in the wrong stuff...
Should I replace fluid and see if that stops or should I simply take it to the dealer and let them deal with it?
View 14 Replies
I got a new to me truck. It's a 2004 F150 Lariat 4x4 with the 5.4L. It's got a whine that I believe is coming from the rear differential. I'm going to change the fluid. My axle code is 26 which I believe is 3.73 non-limited slip. My owners manual says to use 75w-90 but I've seen a lot of posts on here that say to use 75w-140. Which is right or better? Also, is my rear differential the 9.75"?
View 14 Replies
