2001 ford explorer sport trac. Power door locks lock from both sides but will not unlock from either side, have tried new switches and lookd for broken wires in all four door jams.
View 10 RepliesI have a 2010 explorer. I bought it with a lot of the lights, i.e. tire pressure, skid control, abs, service engine, air bag, service rcs and some others on and these systems are not working. a module was missing associated to the AWD system, I have put one in but awd still does not work through the 4 high and 4 low work. The automatic door locks does not lock when the vehicle starts moving. Some of the lights on the dash and doors don't work either.
View 2 RepliesI have a 2011 Avalon. The power door locks will all lock with the door button and the remote key. The problem is that only the drivers door will unlock with either method, what a pain.
View 8 RepliesMy rear right door wont unlock with the key-fob. When you click unlock you will see the lock "twitch" but not open. In order to unlock it you must manually re lock the doors and unlock via the buttons on the driver or passenger side.
View 5 Replies2000 superduty. When you hit the door lock/unlock button, they try but won't move up or down on any of the 4 doors. The switches no longer are illuminated either. Where or have a wiring schematic for the drivers door with power windows/locks? I have done some testing for power, which seems to me there isn't enough voltage going to the actuators, but I can't seem to find power anywhere. The power mirrors don't work either. All fuses are good.
View 8 RepliesI have a strange problem with my front left (driver door) doorlock. I've changed the speaker, so i hade to remove the door panel. When I try to reassemble the door panel and the door lock I have some problems. I get everything in place, but the problem is that the door lock gets jammed. When I only close the door (not locking the door) I can open the door. But when I lock the door, then unlock it, I don't manage to open the door. I then have to fast pull the outside two times real hard, and then the door opens. I have discovered the problem. The door seems fine when I remove this cable: But if I remove the cable, I can't open the door from the outside.
View 1 RepliesMy newly purchased 1999 b5 passat wont lock/unlock with the key. The key does nothing and i dont have the flip key, i want to get a new flip key from the dealer but i am unsure if they can code it to my car if the lock dosent work i took the door panel off but didnt want to take off the inner metal skin to figure it out.
View 9 RepliesRenee said her barn door lock stopped locking and unlocking with the key, so I checked the connecting rod from the cylinder to the actuator and found it had broke off the cylinder. I also found a small metal clip of some sort laying loose in the area beneath the actuator.
I checked the 'net and couldn't find any good, close up pics of each end of the rod to see how it's attached. I did find a YouTube vid of the actuator area, but when the goombah in the vid started talking, I thought to myself, that voice sounds familiar! So I scrolled down the page and what do I see? Apocs pic and name, showing it was uploaded by Jon, LOL.
Anyway, can someone remove that back plastic panel on the rear hatch and take a few pictures of the connecting rod and how it connects to the actuator? I know I have to replace the plastic/metal tab that connects the rod to the cylinder, but that opposite end, the actuator end, has me a bit perplexed.
Well, it seems like it. Bought new, now has under 20k miles. Car starts and runs great to a destination. Stop, shop, start up and drive off. Then, while in traffic, the door locks (4) start locking and unlocking rapidly on their own, then the car will bog down and is unresponsive to the gas pedal. Seconds later, the engine will rev to high rmps momentarily and then lurch forward to a normal speed and it will seem fine for 10 or 20 seconds. Then it repeats the process. It has happened 3 times in the past year. Wife is terrified to drive the car. All three times we took it immediately to the dealer. The second time, it happened there, as they were taking out back. As of this date, the dealer is unable to identify the problem...no codes. It was in for recall in 2014 for the BCM connection repair. It has gotten a new battery 2 yrs ago, and a new key. It has always been dealer serviced. Since it happens in traffic, and my wife is driving we do not know what dash lights indicators pop up, she is trying to keep safe. It's now been in the dealer, this time, for 5 days, nothing!
View 4 RepliesSo on my 2001 excursion v10 my power door locks won't work. The 30amp fuse under the hood is blown and originally thought it was simply the fuse. No biggie picked up a new fuse... yay it works! Well it did for 2 locks and 2 unlocks then blown. So after reading I suspected it was the resistor inside the door lock actuator. So I did the free mod (taking them all apart and using foil instead of a resistor) got done last night popped in a new fuse... 2 locks 2 unlocks and a blown fuse. So I feel like I wasted a bunch of time doing the resistor mod but whatever,and now im back where I started. So right before this problem started originally one of my boys was messing with the number pad on the driver door. Not sure if its related just thought I'd put that in for out there.
View 7 RepliesMy power windows and door lock controls on all doors have stopped working. No blown fuses and the local parts who says that locks and windows don't run on the same relay? I don't have a garage and cant really secure my vehicle?
View 3 Replies2000 Ford Explorer Limited - door locks not working. When they started to go bad, they would lock but not unlock. Then shortly after they were inoperative, including the lock in the back. I checked the fuse and it is OK. This may be something - when I pulled the fuse I tested on side and got battery voltage. The other terminal was showing just over 8 volts. With the fuse pulled, should it have any voltage at all??? Also, what should the voltage be at the switch in the drivers door?
View 2 Replies01 Monte Carlo SS the power door locks do not work - when using the door switches or the key fob. Alarm activates but the doors don't lock. Fuse is good.
View 3 RepliesPower door locks on my 2001 Aurrora have stopped working. It seemed to progress. First the rear door locks didn't work, now the rear and passenger door locks won't open or close with key fob or power switch on doors. I can still operate the door latches manually with the door lock lever. Also the interior lights and power windows to these same doors don't work. I examined the fuses under the rear seat and found nothing blown. What controls all these devices? The driver door operates as normal.
View 14 RepliesMy front driver side auto door lock isn't working. I thought it was the actuator but I already replaced that and there is no improvement. It unlocks just fine by pulling the handle, but the keypad and door switches don't work.
View 12 RepliesI am getting ready to tackle a few projects on the new X. First I would like to fix the door locks. passenger side front, it makes a noise when i hit the lock/unlock button, but doesn't move. Hoping it is the actuator but wanted to make sure first. Is the actuator the first culprit to fix? I guess, How do i know it is the actuator? Wanna order them from rockauto soon. I've researched on here door actuators, looks pretty simple.
View 2 Replies2000 f350 7.3 Door locks unlock and lock constantly. Wait to start light and 4x4 lights don't come on. Gauges stopped working and clicking behind dash.
View 1 RepliesTrying to replace a right rear door handle on my 01 7.3. Attached is a photo of the new handle with the unlock rod. Also is attached is photos of the door without handle. I pointed to the part that moves the lack to unlock.
Looking for the clip part number or photo that is missing. I thought a hose clamp would work maybe with a nut on the rod?
Bought the car 3 days ago, 2013 40000m silver SE 5spd, manual ... pretty nice over all, but those rear door locks trying to lock every time I stop and go over 10mph is driving me crazy. So after researching, I ended up to the conclusion that I have to replace them both, and put the sleeves/covers that they came up with.
View 5 RepliesI have a 98 explorer with the keypad on the door. For some reason the lock does not want to unlock with the key. I know it is the right key and they keypad will unlock the door but I am looking to fix the lock just incase for some reason the keypad decides to stop working.
View 6 RepliesI just bought it off my friend yesterday and I noticed the back door doesn't lock, the glass part doesn't either. How I could fix it?
View 7 Replies