Ford Excursion :: Without Dropping Tank Remove Hitch?
Jul 12, 2015
My hitch receiver is looking pretty strange lately and I want to take it down, grind it and repaint it. While crawling underneath the truck today, I noticed that it appears the bolts holding the hitch are kind of covered by the Tank Skid Plate.
I did some searching, and from what I've gathered, it appears that To drop the skid plate means to also drop the tank as they are one unit.
Is this true? Is there any way for me to get the hitch receiver out without messing around with the gas tank?
View 13 Replies
Advertisement
I know this sounds pathetic but i cannot get the ball hitch off of my truck. That thing is on there and i cant get it loose because the ball keeps turning when i try to break the nut loose. I have tried several ways to keep the ball still but they don't hold it enough for me to get the nut loose. I dont care about keeping the hitch i am trying to put a smaller one on and don't need it so if i have to break it to get it off i don't care.
View 4 Replies
I bought a tow hitch to put a carrier on the back of the vehicle for long trips where we might have 1 or 2 too many suitcases to fit inside.. I don't want the hitch on the vehicle for everyday driving which will be 99% of the time. It seem to me that if I could get the right size threaded studs I could just lift the hitch into place, tread on 4 bolts, and be done without having to take off the exhaust suspension bracket.
View 1 Replies
My hitch is rusting so bad that I can pull it off in pieces. Surprisingly it seems to be the only major rust on my EX. I crawled under it the other day to check out how it is removed and I only saw half of 4 bolts. Those bolts look like they are under the fuel tank and I can't get my socket onto them.
My question is, do I need to drop the fuel tank to remove the hitch, and also is there anything else I should do while the fuel tank is down.(Besides replacing the hitch with a new one.)
View 14 Replies
A buddy of mine ripped the hitch off his excursion due to rust. Anything can be fixed. I will try to get a picture of it.
View 10 Replies
I've never used a rust converter, so I have no experience and wanted to hear from those who have. I've got some light rust on the frame rails and the hitch receiver. What product would you recommend, or do these products work well enough to consider? According to all of the websites, they all work miracles...
View 3 Replies
How hard is it to drop a gas tank from 2001 F250 short bed? It is a gasoline, not a diesel truck. I need to remove the filler neck to modify it and I cannot disconnect the hose from the neck filler to the tank while the tank is in the installed position. So, I want to drop it so I can have more leverage to pull it off or cut it off and put new one on.
View 7 Replies
So when I first got my car, the dealer had put in a full tank of gas and the miles to empty range was at 347~. After several fill ups since my purchase, the miles to empty has been dropping every time I filled up. A few fill ups ago, I remember it was 327. The latest fill up was about 318. What gives? Do the current MPG avg affect this number? What is the factor for the variance?
View 17 Replies
Today I was 160 miles into a 250 mile drive and things were going well. I was cruising at about 75-80mph and approaching a fairly long hill of moderate grade. As I climbed the hill, my rpm was dropping, as expected before a downshift. The downshift never happened. I kept pushing more pedal and eventually, at maybe 40mph, it downshifted, but still no power. Engine being held at around 2500 rpm. No power no matter how much I pushed. Down hill I was able to resume speed but as soon as the next uphill, same thing, no power, no shift. Pulled over, it was raining hard. Checked for wet fuse box, control modules, pcm, wiring harnesses, everything dry. Checked all fuses. Disconnected battery in hopes of forcing reset, no change.
Checked trans fluid, it was clean, red, full, and unburnt. No visual wires broken or chafed. No odd smells or sounds. Nothing noticeably hot. Truck hits 45mph max on flat ground. I limped it this way for 20 miles. If I push my foot to the floor to really force a downshift, engine will rev freely up to redline with no resistance once it downshifts. If I let the rpm drop down, it will catch and lock back in. Now when I come to a stop the truck has a very lopey and rough idle and will stall once I come to a complete stop. It will stay running if I give it gas. In neutral and park the engine still has a lopey idle and is rough. Will possibly die at times. Sounds smooth and perfect when you rev it in neutral or park. Reacts as it should with no hesitations. No check engine light and no flashing OD light. Will shift into all gears, just moves through them with no power. Let truck sit for 3 hours, issue remains.
View 14 Replies
2010 F-150 with 38 gallon tank. Original thought was great way of having some spare fuel available for use during an emergency. How to easily remove gas from these new vehicles?
View 10 Replies
Grill blocked today for the first time and have a couple questions.
Temps have been dropping more these last 3-4 days and have noticed my MPG dropping as well so I thought I'd try grill blocking.
Tempts have been and will be high 30s-low 40s in the morning and upper 50s to mid 60s for the high.
At first I just wedged the pipe insulation and drove one trip. I didn't feel comfortable that it would hold for the long haul so I added zip ties.
I used two pieces of pipe insulation 1/2 inch copper / 3/8 inch iron. Up close it looks like 2/3 or 3/4 of the grill is covered.
My two questions:
For fWT, at what temperature should it not exceed?
At what outside temperature should I remove the pipe insulation? In the Phoenix area, temperatures rise in March and sometimes we will have a short period of warmer than normal temps in February. I just want to make sure I do not cause overheating.
View 19 Replies
I have seen pictures of other hub lock cups that have Allen bolts to remove - mine do not have any fasteners - how can they be removed - do the just pry off?
View 14 Replies
I've got the front of the excursion done with my spring swap finally and now it's onto the rear. How do I move these ac lines along the passenger side to get them out of the way from that shackle bolt? I see the brackets holding them but since they are all hard lines how many do I have to remove?
View 3 Replies
I have a newbie question on how to remove the rear bumper? Do I disconnect the sensors first or remove the bumper and disconnect the sensors.
I read this thread : [URL] .....
But was not sure which bolt to remove? Is it all 4 on each side or 2 toward the rear of the bumper?
View 10 Replies
I need to send my cup-holder cover and trash hook to Clay so he can color match my F650 dash and I can't figure out how to get the damn side clips on the cup-holder to let go!
I got the top clips and the bottom clip to let go but the side clips will not slip through the slots... I've been near the point of breaking them trying to slide them through...
View 1 Replies
ok normally im very good at this stuff, but i just dont want to break anything (already broke 3 of those little "push" pin things that hold the plastic cover/trim pieces over the front bolts)
how do i get those out without breaking them, and the bolts towards the back of the bench seat, i dont even see where they are! i know there are 12 total. trying to remove to replace my carpet
View 8 Replies
I am going to mount a second fuel tank on my excursion -- I have measured and build a simple cardboard model. even measurements that they have used in the past? I looked at the tanks on
[URL]
they don't have any specifically for the Excursion I am thinking that the shortbox 250/350's probably are too long for the excursion.
View 14 Replies
Installed an aftermarket stereo but having problems with the steering wheel controls adapter I purchased and need to remove the radio to access the settings on the adapter. The kit I used to install the radio states that once the radio is snapped in place with the kit, the dash bezel must be removed to access the radio. I googled and I cannot find instructions on how this piece come off.
View 11 Replies
I took the plastic cover in front of the radiator off to clean the radiator and condenser. It directs air through the condenser before it gets to the radiator and I was wondering if it would cool the engine without it (if you don't need real cold ac air) . Without it the air can go over the top of the condenser and it is still blocked by the flap that stops airflow above the radiator. Also, I am wondering if the fact that the condenser has nothing in it affects the radiator cooling, and is it bad for the AC system to be empty. (My AC doesn't work)
View 7 Replies
I'm trying to upgrade my speakers. I got the ones in the front and rear doors installed. I hoping there is a way I can access the speakers without having to completely remove all of the rear panels.
View 8 Replies
I was in the process of changing out rotor and pads and my caliper bracket bolts while loosening them. The weird part is the bolt was turning in the process. The passenger side was easy as pie. The drivers side has me stuck. I have tried to drill out the broken bolt but noting is working. I don't know where to go from here. I have already purchased a new caliper and the bracket that goes with it. I just need to get this old one off so I can move on.
View 14 Replies
