Ford Excursion :: Passenger Side Seems To Be Roaring At Certain Speeds
Dec 10, 2016
So I think I'm having some issues with my front end. The passenger side seems to be roaring at certain speeds (25-40 and 80+). It's getting cold now and I still don't have much in the way of tools since the company that cleaned out our house after the fire ran off with most of them so I'm more than likely going to have to get it done at the dealership. Is it as easy of a job as I remember or am I forgetting something?
YouTube ....
I don't really know how to explain it really. It sounds like there is a motorcycle passing me or like I have a mud tire on that wheel is all. It's normal at the other speeds, but once I hit the "sweet spot" it just drones really bad and I can't even hear the motor. The only way I know to describe it is as a roar, it's really weird.
View 14 Replies
Advertisement
Getting a roaring sound when driving at speeds above 20mph... Almost sounds like loud exhaust, but it does not fluctuate with engine RPM's. 40K on the car - bought one year ago... seems pre-mature to fail that quickly no?
View 16 Replies
I have a 2000 X 5.4... There is a loud roaring noise when releasing gas pedal or stopped (doesn't matter whether its in park or drive)...noise stops when giving gas...the noise is almost like a bull horn...there are no engine lights on so can't get a code...
View 8 Replies
I have an 02 Eddie Bauer V8 AWD that is making a ticking noise at low speeds ( under 10mph ) on the pass. side. It sounds like a rock in a hubcap noise. I have pulled the wheels and checked the CV boots and they are fine.
View 3 Replies
Went into town earlier and the a/c was not blowing out the 2 passenger side vents. Could switch to defrost and it would blow correctly. The rear is working as well. The drivers side vents blow good and if you cover those with your hands to block them off its like it forces air to blow out the passenger vents. Could this be a blend door issue?
View 2 Replies
We bought the X like almost year an a half or two years ago. Since the day we bought her shes had an exhaust leak on the pass side. Ive been a mechanic forever and it didn't bother me at purchase. Well I finally get around to it this last weekend. My son and I get to repairing her on saturday. Well we got manifold off with the intention of ordering a new set of headers. Well Luke talks me into just replacing the broken stud (got lucky only had 1 on the pass side). And replacing the gasket. So I took the manifold to get resurfaced,got the new studs and gaskets.
We reassy everything. It went well, start her up and wow shes finally quiet. I love it. So were sitting there admiring our work (took most the day as we had to drive 40 minutes away 1 way to get parts and angle drill alone). As were sitting there chattin for 5 minutes im like do you hear that.....Its getting louder luke WTF.....WELL IN 5 MINUTES THE DAMN LEAK IS BACK... It sounds like its back at the original place but while listing with a hose it sounds like its also at the y pipe. But the sound can be traveling......
I def am not a fan of Autozones felpro gaskets but they have worked in the past. But they look NOTHING like the factory units but still should work. Well I searched all weekend and read tons of posts on what to get. As I def want to replace the y pipe also. In the end said ok,what the hell. I just got off the phone with BANKS. I ordered headers,y pipe,gaskets,etc. I didnt want to spend that much but after pricing headers (from all manuf's and a new y pipe) the BANKS complete system wasn't much more...
Kit should be here tomorrow or wed at the latest. And I just want my X to be exhaust leak free. Im not big on taken pics during install of stuff but ill try and ill post up after it done.
View 14 Replies
So I just don't have any luck with anything turbo related. Last time it was my intercooler that went out. Now the passenger side intercooler tube keeps popping off and the damn clamp is broken so I can't tighten back up to even get me to the damn truck stop. I guess it could be worse...it could be late at night and raining...oh what, it is.
View 14 Replies
I thought I was out of the woods on this. It looked like water was coming from the HVAC, and I haven't seen any moisture up front for a while. I did find a problem leading to the wet rear cargo area; there was a small crack in the paint on the passenger side gutter, almost back by the hatch hinge area. I noticed a pinhole sized area that appeared discolored, as though water had been involved. Sealed that with some 3M Crystal Clear sealant about a month ago, and it's been dry ever since.
Last weekend, it rained heavily, and I went out the morning after it rained and checked the passenger footwell again. Bone dry, so yippee, right? Nope. I start up and when I move, I heard water sloshing, then saw a small flood run down the carpet next to the passenger kick plate. I mopped up, but what could be holding so much water that I could hear it? Is there a tray that might be clogged under the cowl on the passenger side?
View 12 Replies
Rear passenger's side window doesn't work, everything else is OK so its not the fuse, switch, or lockout.
View 5 Replies
Got home from work last night, passengers side rear wheel was smoking, and damn hot to the touch. Drivers side rear was hot, but not as bad as passenger's side.
My first thought was worst case sceneries - wheel bearings. After getting it in the air, in neutral, I can turn the wheels, but, it takes a lot of effort. There's no grinding noises, but, it sounds like a brake is in constant contact.
I'm in the process of taking both wheels off, but, I'm leaning towards either the brakes/calipers or the ebrake dragging. It definitely smells like hot brakes, and not diff fluid.
View 14 Replies
The passenger side rear door will not open. I've tried from the outside handle, inside handle, jerking, pushing, etc. Nothing.
How in the world can I find out and fix the problem if I can't get the door open to get the door panel off??? And yes, I've tried unlocking it...
View 8 Replies
I am having a lighting issue in my ex with my passenger side headlight. when i first purchased the vehicle last august the headlight burnt out. i replaced it no big deal. it worked just fine for about 6 months and i have now replaced the bulb 3 times since. the last two times the bulb worked for about 20 minutes then went very dull. Now nothing. when i pulled this last bulb out saw a charged/burnt look to the vehicle side of the plug. What is going on and how i can fix it?
View 3 Replies
My passenger side rear window will not open. Is there a fuse for this or is the motor just bad?
View 3 Replies
I did look but couldn't find. So the locks work like a bullet when using the remote. However, they...especially the passenger side door locks are slow. Passenger side struggles to move at all on some occasions.
View 13 Replies
Shortly after driving off the dealer lot last year with the 2014 Camry a persistent rattle would appear at 70 MPH. It sounded like it was coming from inside the passenger door.
The culprit was a loose passenger side rocker panel knocking against the undercarriage at highway speeds. A few plastic push pins securing the panel to the underside of the frame backed out.
After pushing the pins back in a small dab of RTV was applied at a few locations where the rocker panel comes in contact with the undercarriage and dab was applied to each push pin. Now, not even the heartiest of car washes will work anything loose again.
View 2 Replies
So broke down today and have no tools, in a city I don't live in. Huge coolant leak behind the block on the passenger side. Luckily we broke down right at a mechanics shop. They need to take off the manifold to get to the rusted out metal piping in back.
I am new to the V10. Looking for information on what could be leaking back there? I know I could do this myself but I need to know what parts I might be dealing with first. And its tight quarters back there.
View 12 Replies
I have water coming in on passenger side right above rear cup holder an another spot further back by rear window. I was told roof rack so i removed cleaned and resealed all bolts around wholes with silicone. Rain today an still have water coming in? See rite on edge of headliner gets wet. How hard is it to remove headliner? Maybe not all way out but could drop enough to see whats going on in rear compartment. Its a 2002 xlt...
View 12 Replies
Its been awhile since I have been on. Everything has been running great for me until I found my passenger side front axle leaking fluid. I'm sure something has been posted on here but I have limited access to internet right now and need to know what I am getting into to change the seals. From what I have found there is an inner seal in the pumpkin and then an outer seal and dust cover. Are both of these easy to change? Are there any special tools needed? Do I need to remove the gears in the pumpkin? If so, is this difficult and any special tools required for this?
Mine is a 2001 V10-6.8, 4x4 no mods at this point.
View 14 Replies
I have a 2000 Ex V10 with 170,000 miles and the passenger side headlight stopped working. I changed out the bulb and when that didn't fix it, I changed out the harness.
The driver side headlight works fine as well as all of the other lights. What to look at next.
View 5 Replies
Having issues with passenger side door making noise on the highway at higher speeds or over bumps? I've recently begun to notice a slight rattle coming from the passenger side door when at highway speeds which becomes more noticeable and annoying when driving over a bump or less smooth roadways. I just reached 1500 miles. I have looked around on the forum and found some issues that various GTI owners experienced most dated from last year (talked with a MK6 GTI owner today at work who mentioned there was a recall not too long ago on this issue?), but I feel like that would have been since fixed with the R if the recall was last year.
View 9 Replies
2005 4wd excursion. I have a leaking rear seal on passenger side.
I have the hub assembly off. I'm down to the spindle. My old seal came out in pieces. There's either a piece of the old seal or another seal on the back of the spindle.
Are there two seals? This what looks like a seal still on the spindle against the plate on the back...
View 1 Replies
