Ford Excursion :: Occasional Hard Pull To Right Under Braking
Sep 24, 2015
If I brake hard a dozen times, 8 or 9 will be normal, a couple times it will pull to the right but as long as your hands are on the wheel you can barely tell, and maybe once it will pull really hard. I have Hawk super duty pads and Ebc rotors with less than 5k on them and I just replaced the front calipers and hardware because I thought that was the problem.
It's not even consistent. Could possibly be rear calipers (rear also has new Hawk pads and Ebc rotors with less than 3k on them) but I don't think it would pull that hard. Tire pressure is even between sides btw.
View 12 Replies
Advertisement
When I bought my X, the front end would periodically shake and pull to the right.
I recently redid the front brakes on my X. Replaced everything except the rotors; they looked okay. That fixed it pulling to the right and fixed the shaking somewhat, but it still shakes when I apply the brakes.
I don't feel it through the pedals. It's all up front, too. You can see the steering wheel shaking really bad.
What I'm thinking is maybe it's my tie rod ends? I think my front brakes were locking up and causing the shake to happen all the time. I think when I fixed that, it made it to where the shake only happens under braking. This makes me think it's the tie rod ends, or something else loose up there. I recently replaced the ball joints, too.
Or could it be the rear rotors? I just want to make sure I'm close before I start throwing parts at it!
View 8 Replies
When I brake hard. My truck wants to veer right. It drives straight otherwise.
I recently had my front shock replaced and prior tp that my truck did the same thing, although it was much worse since my left front shock was leaking. Originally I thought it was pulling because of the bad shock but now that thet've been replaced I am not to sure.
Alignment issue or something else entirely? Coud bad rear shocks cause the issue?
View 14 Replies
I am having problems with my steering being all over the place. I noticed it at first when braking. It would pull to both sides. At a stop light holding the brakes my steering would randomly pull. I replaced the power steering pump. It didn't fix it. Now just driving it pulls all over. I was thinking steering box?
View 14 Replies
I'm getting tired of this. Bought my Ex in April 2013
Realized in June '13 that truck would pull to the left a little when I braked. Replaced pads and rotors. Factory pads and rotors looked normal but whatever.
December 2013 - shimmying when braking downhill (not towing). Replaced rotors, pads and calipers with Power Stop.
September 2013 - Everything was good but I now have the the left pull about 35% of the time when I brake. After extended downhill mountain driving (7%+ grade for 15 miles) I get the shimmying. I only get the shimmying in this situation.
When I had my tires rotated (reputable shop) I was told I only had a 2-3k miles left on my pads.
I do drive aggressively so I'm not surprised I need to replace my pads more often, especially on a large vehicle. That said pads wearing out at ~10k miles normal?
I was going to just order new pads and install them this weekend but what is going on. Ex currently has about 64k miles on it.
View 14 Replies
I have a 4 cylinder 2000 Ford Contour 133k miles
I've only driven the car for about 2 months, Ive never had an issue with it until yesterday other than an occasional hard shift when driving the car hard. Yesterday when I dropped the car in drive it wouldn't pull at all, I sat in my apartments parking lot continually revving the car high in drive but it wont do anything, its like the car is in neutral. Reverse works and I can drive by manually shifting from first to second and then putting the car in drive, but if I put it into drive before reaching 3rd gear it jumps back to neutral.
I checked the linkage, and the lever it connects to on the transmission; when put into drive the position of the lever coincides with the neutral position. I called a few local transmission shops and they diagnosed is as a broken sprag, but from reading online it seems like it could be a clogged transmission filter or a faulty transmission range sensor. Prior to this issue I would sometimes here a whistle coming from under the hood when driving, I didn't know until today that a whistle is indicative of a vacuum leak, but wouldn't it throw on my check engine light? I have checked my transmission fluid, its at the correct level and is a nice cherry red, it doesn't have any bad or burnt odor.
View 7 Replies
I have a 2012 Camry LE. When I let off the gas between 25 & 40 mph, the transmission aggressively brakes. Occasional acceleration surges when braking. And when I need to go, it sometimes does not want to go until I punch it. All problems are sporadic.
View 2 Replies
I have a 2006 that shuts off in a hard pull, if I wait 3 minutes it starts again. I hooked up my scan tool and when it dies and I crank it it only builds 200psi oil pressure, let it sit it builds enough pressure to run fine. If I dont push it over 3500psi for more than minute it wont die pull a hill it dies again. Is it the hpop or an o-ring.
View 10 Replies
recently acquired an 07 mercury metallic with 118000 one owner and about 8 pages of maintenance all done at Lexus. car is in fantastic shape new tires, and brakes the interior still looks and feels brand new, to date I have changed the oil full synthetic 0W 20, eng and cabin air filters Toyota serviced the transmission changed the plugs with OEM off ebay. Rotated tires, rear diff fluid i couldnt find 75 / 85 anywhere so it wasn't too expensive from Toyota. the front left low beam was flickering so I replaced them I followed cucusdad instructions and it went as he mentioned about an hour per side, although I did take the opportunity to clean the inner fender well and the inside of the tires and rims.T hrough the years we have owned countless cars a couple of brand new ones although this is the first Lexus, I am very handy in the garage and have an understanding of electronics and maintenance upon reading this forum I think folks perhaps want perfect that's impossible as for mentioned this vehicle has been well maintained and obviously personally cared for.
: passanger seat heater/cool inop no light, (wifes only complaint, believe me that's saying a lot)
: aux audio input has intermediate static
: passanger rear door puddle light inop.
: slightly yellowed headlights.
: occasional vibration feels to be from front left while braking although mostly tracks straight ahead
: a very quiet car although I have read and may someday entertain some wind noise application on the triangle piece
None of these anywhere unreasonable on any car with similar miles and production date regardless the manufacture
View 8 Replies
I have a 2000 Excursion with a 7.3 diesel. I have 245k on the clock. Engine and transmission are original. I have an overheating issue when I am towing and pull a long grade. It's not as bad as it was before but it still happens and I am tired of turning off the AC and putting the heaters on full blast to support cooling when it is 90 plus outside. A list of things that I have done so far.
Newer water pump and thermostat.
New tensioner.
Installed a new trans pan with about 7-8 larger capacity.
Used some magic juju juice to clean out colling system.
Installed a coolant filter. I am on my 5th filter. The first one didn't last 500 miles before getting stopped up.
Switch to Delo ELC.
I recently had the upper hose off and when I looked inside, I didn't see any scale or build up. I also read about some of the trucks of that vintage didn't get a trans cooler. When I looked, I saw a cooler but it doesn't look like it is plumbed through the radiator.
I want to install a large trans cooler. I don't want to replace the radiator just for the sake of replacing it. Also, look at the pic of the water pump with the thermostat sitting in it. Is the thermostat supposed to be resting all the way down? I keep wondering about that.
View 14 Replies
I'm looking at purchasing a 2003 F-350 from a Ford Dealer, Drove the Vehicle last night and the Gear shiftier was very tight and hard to pull down. Is this a real concern? The Sales guys said its better to be stiff rather than sloppy. But they will say anything, right. The vehicle is a deal and so I'm looking to find out why.
View 1 Replies
Wanted to ask B6 owners first, from time to time I hear what I think is a backfire after doing a hard pull in 3rd but never in 2nd. Now I'm not sure its a backfire but after I shift to 4th I hear a small pop from the back of the wagon. Don't know if this will happen in 4th after a pull, have not had enough road or balls to do this. ( In Oregon you get a huge ticket and license pulled for 30 days for anything over 100.) Everything runs fine, I only have the Neuspeed intake for the autos and thats it. Any thoughts you B6 owners have B4 I go to the 2.0 fsi page would be great. Here are some pics from the big snow storm we had here in Portland back during xmas. The Thule chains worked great when I was not high centered.
View 3 Replies
Every time I hit a hill, loaded or empty, or get on the truck on level ground after about 15 seconds it acts like it's running out of fuel. The pump starts getting noisy like it has air in it, but it'll straighten out eventually. If you don't let off the fuel it'll eventually stall out. No check engine light, no codes. Truck has a ts chip but it does it on all settings. New fuel filter, changed oil with hot shots secret, new air filter, hutch mod done. I'm at a loss for what to do. Good fuel pressure also.
View 8 Replies
My truck's been having an occasional hard start, meaning the engine cranks strong but it fails to catch and then sputters. The 2nd start attempt usually fires up with no issues and then runs perfectly otherwise.
MPG's haven't changed, fuel filter was changed 15K ago. Air filter is clean. Plugs were changed about 10K ago. I always use Shell/Chevron gas. MAF sensor looked clean when I took it out so I didn't do anything to it.
This is starting to happen more frequently, maybe once every few weeks and I get a feeling it's the start of something. I've found myself waiting a few seconds for the fuel pressure gauge to come up before turning the key to start reliably. In the past, I could simply flick the key and it fires up the first time.
I see posts talking about the fuel pump module above the spare tire. What are symptoms of that going bad? Any pending codes that might be stored?
I'm about to get myself a scanner since I need one sooner or later. Which specific PID's to check while debugging this?
View 6 Replies
The 3rd row seat in my 2006 Mazda MPV doesn't secure itself to the two clamps on either side no matter how hard I pull on the back strap. What to do?
View 1 Replies
On my wife's '06 Elantra, the hand brake is very hard to pull up, barely getting one click from it. I've done some looking around and have not been able to find a solution to the problem.
View 2 Replies
Last night it was just below freezing and the roads were a little damp so I figured I'd see at what point ESP would kick in on a hard 2nd gear pull. Sure enough power cuts off at around 4000-4500 rpm.
Turn "off" ESP, try another hard 2nd gear pull expecting some nice tire squeal but I get nothing and obviously still no traction from 4500-6000 rpm. Was my clutch slipping? Is ESP capable of knowing when the clutch is slipping (I would think it had nothing to do with it)? Maybe it was just damp enough that the rubber was spinning in one place but it wasn't making any/limited amount of noise?
Car: GTI, Manual, Stage 1, Winter Tires.
View 8 Replies
My Dad owns a 2007 Camry SE with the 2.4 l4 engine. Occasionally most of the time in heat it is sometimes hesitant to start. It will start always on the first try but sometimes the key has to be held longer to get it started mostly though in the summer when its hot out. For example he parks a little after six in the morning at work. He don't get in the car until 5 to 5:30 in the evening. You know then it has been in the heat a while. He says it rarely happens. He also said it's not like a slow crank if something had been left on to drain the battery. It's just the key has to sometimes be held longer than normal for it to start. It's not very likely but this has happened once or twice in the winter time also.
I know the car does still have the original battery. It starts fine in the winter when cold. This hard start deal happened a few weeks ago after work also. I know out of the other toyota's he has had they have done this every once in a while to. I really myself don't think it is anything to worry about. I am just asking what might cause it to do that sometime. I would say nearly 98% percent of the time though it will start normal. This has kinda always happened since we got the car used in March 2010. I hadn't thought about much though since it rarley happens cause most of the time as I said above it will start normal.
View 3 Replies
I have to pull up really hard to get the parking brake to hold. If I'm on a hill forget it, I yank up really hard and then leave it in gear just in case. I have installed new cables and pads. I have also have the lever adjusted so it starts to catch when you pull it up about 2-3 inches. I've never driven another mk4 so I don't have any other reference to how well the parking brake should hold but I would think that I wouldn't have to pull up this hard to get it to habe any real holding power.
Any other vehicle I've driven with a hand brake I could easily lock up the rear tires. I'm lucky to get mine to lock while pulling so hard I think I'm going to break something. I've searched around and have only come up with threads about replacing cables and adjusting the lever. I couldn't find anything like the problem I'm having. Is this normal operation for a mk4 or is there something wrong with my calipers that needs to be addressed? My regular brakes work fine and the parking brake arms on the calipers allear to be functioning properly. They contract then spring back on their own
View 9 Replies
I have a 2003 Volkswagen Golf 2.0L 5 speed manual. Over the last 10,000 miles a problem started where on the highway in 5th gear, if i try to speed up by putting the pedal down, the steering wheel moves itself to the left and the car steers to the left. The wheel returns to the original position when i let off of the gas. its scary at high speeds and has become so bad that I can feel it accelerating at low speeds too.
The alignment is off and the steering wheel slightly to the right. when I put the gas down and it goes perfectly straight and when i release it goes back to the right. it has 126,000 miles on it. I know it needs tires, shocks and an alignment job but don't think that those factors are causing my problem. Could it be the motor mounts?
View 2 Replies
2002 AVH Jetta Wagon. When I got the car back in 2012 it had 121K and I changed the wires (ngk blue 57021) and plugs (ngk platinum) and she drove like a dream. A couple of months later I started having issues with wet weather and moisture causing misfires so I did the JB WELD fix and though I'd still get the occasional misfire in hard rains it lasted me pretty much until very recently, when I decided I needed to put in a new coil because the problem was getting worse (hardly starting up after a rain and bucking wildly till things dried out). Yesterday, I replaced the BERU with a new HUCO and the car started up fine and drove fine all day. I think there was a lot of moisture in the air last night and possibly some rain but this morning, SAME PROBLEM with a new coil. Misfiring like crazy, no acceleration.
I thought the NGK wires and plugs I got were rated to last beyond 20,000 miles. At this point should I assume the wires are to blame? Split somewhere or something? It's definitely related to water and the electrical system.
View 18 Replies
