I have a newbie question on how to remove the rear bumper? Do I disconnect the sensors first or remove the bumper and disconnect the sensors.
I read this thread : [URL] .....
But was not sure which bolt to remove? Is it all 4 on each side or 2 toward the rear of the bumper?
The red ones that are in the rear bumper, Do I have to take off the whole bumper?
View 22 RepliesI have a 2012 Camry and was wondering how to remove the rear bumper cover? Someone backed into me so I have a shallow dent I want to pop out of the plastic.
View 6 RepliesSo I'm trying to remove the rear bumper cover on a '15, but it has been a royal pain. I went in thinking that the procedure would be similar to what it is on the '14, but it is way more involved. The biggest issue I'm having is removing the large plastic triangular side bracket. It has these weird T-nuts fastened to the body, which you cant remove, and the whole thing looks like it would need to slide upwards to get it off, but you wouldn't have enough room because the shape of the body just gets in the way.
View 1 RepliesHow are you going to remove the chrome strip on the rear bumper. Mine got damaged and I need to replace them with a new one.
View 5 RepliesI have a '12 Elantra Limited and I'm planning to smoke the rear bumper reflectors. How to remove them?
View 20 RepliesHow is the red marker light lens, located on either side of the rear bumper, removed to allow the bulb on the inside to be replaced?
View 2 RepliesHow to remove and possibly replace the rear bumper cover on a 2003 camry?
View 4 RepliesMy Excursion had a mangled rear bumper when I bought it recently. I just bought a salvage one to replace it. I had it installed today. I want to salvage the backup sensors in the old bumper along with the license plate lights. How do these come out? They seem locked in there to me.
View 3 Repliesok normally im very good at this stuff, but i just dont want to break anything (already broke 3 of those little "push" pin things that hold the plastic cover/trim pieces over the front bolts)
how do i get those out without breaking them, and the bolts towards the back of the bench seat, i dont even see where they are! i know there are 12 total. trying to remove to replace my carpet
I'm trying to upgrade my speakers. I got the ones in the front and rear doors installed. I hoping there is a way I can access the speakers without having to completely remove all of the rear panels.
View 8 RepliesI need to pull my front overhead console to make some changes, gonna try to mount my sirius cradle up there to get it out of the way. Can't figure out how it is fastened up there. Also, I need to pull the cover off the rear seat DVD player as I want to solder in some RCA's onto the aux in. Can't figure this one out either, and I'm afraid to break the cover.
View 4 RepliesIs it possible?
View 1 RepliesI have took off the screws in below pictures. But the bumper seems still stick on the car body. Any screws are missing? Or other issue?
View 4 RepliesAs owner of the Phaeton diesel v6, 3.0D... I need to remove the bumper in order to have full access to the headlight unit.
View 4 RepliesHow to twist or pull the factory connector stored in the rear bumper, for hitch install. I see a small gray clip somehow attached to the barrel connector, but it doesn't seem to want to release.
View 4 RepliesI was hoping there were instructions on how to remove the 2010 RX350 front bumper cover somewhere? We had a little fender-bender, and I was planning on trying to replace some of the items myself. I'm handy, but always prefer instructions over trial/error!
View 6 RepliesSo i've been searching for ways to remove the bumper/door chrome trim to change to black but cannot find anything about the b5 or 5.5. What i'm trying to do is get the chrome to black but cannot figure out a safe way to remove them to either wrap in black vinyl, paint or just replace with black strips. I'm not trying to completely remove them just get the chrome to black. Its an 03
View 10 RepliesFinally got the Aeroworks CF splitters and spent some time to install it. Took me about 3 hours but I also took the time to put on some adhesive velcro for protection. And re-sealed one of my headlights
First I took off the bumpers. follow this guide
How to remove the bumper from a Lexus IS250 / IS350 to install Lite-Eyes CCFL Halos / Angel Eyes - YouTube
Then the rest is easy. Make sure to clamp or put a bucket under the washer fluid hose if you have the headlight cleaner option. Fitment of these splitters are almost 100%. right side was perfect, left side has a slight gap but its like 1mm ... very small.
Just line it up, and drill 3 holes on the bottom and 1 on the side. The splitters came with screws and some fasteners. Easy to install. I put some 3M adhesive tape as well just in case . I stuck some Heavy Duty industrial velcro strips on the underside in case i rub.
Thinking about getting a used Camry. Is there any issues with any of the years in the seventh generation Camry? What are some of your likes and dislikes of your car? For example I have been told that on the sixth generation Camry you have to remove the bumper to change the turn signal bulb. I have never had to deal with this, just what I have been told.
View 14 RepliesI need to replace the center mesh grill on the front bumper. Is there anything I need to be careful with or watch out for. when I pull on the old grill or when I push the new one back into place? Does it come out easily or is it tricky?
View 4 Replies