Ford Excursion :: Hard Time Getting Out Of Park And Into Gear
Jul 4, 2012
Lately (within the last couple of days) when we park the Excursion we have a difficult time getting it out of park and into gear whether it is going in to Reverse or Drive the gear shift does not want to move.
I have not forced anything at any time but eventually with some pumping of the brake pedal and some putting into park and out of park we can free it up. This is something that happened virtually overnight and once we are in gear everything is normal.
What is causing it? I am making an assumption that it has to be some switch in the steering column but I am no mechanic and only guessing.
View 4 Replies
Advertisement
I have a 2005 Ford F-150 with a 4.6L and auto tranny non 4 wheel drive. I have a hard time moving from park to drive and reverse. Is there a switch that lets you put it in gear once the brake pedal is depressed? Could that have gone bad?
View 5 Replies
What causes this? I have to mess with the brake pedal for a while for it to finally register that i have my foot on the brake and let me shift out of park.
View 5 Replies
As it's progressively grown colder (which may or may not be related), my truck has grown all but impossible to shift from park into reverse neutral or drive with the engine running when the truck is cold. I often have to shut the engine off, and once I do it immediately is very easy to shift out of park into neutral, and then I can restart the engine. Once the truck has been driven some, it's not hard to get out of park, but if it's shut off for some time (an hour maybe) it will be difficult to shift out of park again. I don't know how to begin troubleshooting this.
View 8 Replies
I've seen this talked about before and it's happened to me before as well but now the tranny is leaking onto my Ypipe a couple times per week and it's giving me a hard time when I try to reverse. revs drop and it stalls if I don't give it enough gas.
So I know I have to change the seal but Ford is telling me the torque converter will need to be replaced but another transmission shop told me once the seal is changed and fluid level set appropriately I shouldn't have the reversing problem anymore?
Is this something I could attempt myself... looks almost like I'd have to move the exhaust to drop the tranny...
View 12 Replies
The truck:
2000 4X2 F150
4.2l V6
280k miles/ some towing
The problem : The trans has a hard time getting into 1st gear. When you put it into gear you have to rev it to about 3k (when it's warm, 4k when cold) RPMs at which time you feel a definite engagement and it goes through the rest of the gears just fine. Once it's warm it will do stop and go traffic as long as you start it with the OD off.
The background : Orobably the stock motorcraft filter on there, and I don't think the oil has been changed in the life of the trans, but I do know that it's never been ran low on fluid. I took a gander at it and found a plug where a gear type speedo went on older models to be loose and leaking. tightened it up about two full turns. also noticed what looks to be a leak where the main case meets the output shaft housing. now I know neither of these are the cause of my headache but I do wonder if the second leak might be a sign.
The research : I've been looking for almost a week now for a solution. I've been all over TCCoA, Explorer Forum,10 pages of search here on FTE and various other Ford based websites and have come across a single thread with the same symptoms but the OP never came back with a solution.
The plan : A fluid/filter change (and flush) is definitely in the plans as well as inline filter for my own satisfaction. from what I've read the stock 1-2 accumulator is known to go bad on some of these and if I have the pan off might as well check anyways.
View 7 Replies
2003 Excursion 4wd. Noticed a few days ago that when selecting reverse, it seemed to take longer to actually go into gear. Didn't think much of it and it has been fine since. Pulled the camper a few hours away for the weekend..
Now the truck is slow to engage reverse. Even when warm, when I put it in Reverse, it takes up to 30 seconds or so for it to 'catch'. I checked fluid and it's ok. Shifter feels ok. Fwd gears are fine?
View 14 Replies
So ever since I picked up the truck from getting the springs swapped out the tranny has started to slip more and more. It's about at the point now where it does it at the 1-2 and 2-3 gear change every time unless I give it a little throttle so it shifts harder. It's just the normal shifting pause and then the slight jerk when the next gear starts. Time to a new torque converter, or am I looking at getting my whole thing rebuilt? If it's the converter I can give that a shot myself but if I have to have it rebuilt it's going to have to wait until January or February.
View 14 Replies
I have a problem with my 2003 Ford Focus ZTS. It has a 2.0L ZETEC engine and is automatic. I recently replaced the Starter, Alternator, and battery cable because the car was having some current issues. All parts are brand new, non-refurbished. The car cranks fine but is now sputtering. When I drive it, it seems like it has a hard time switching out of first gear and and will hit 3-3500 RPM before the gear shifts.
View 1 Replies
My fiancee, has a 2003 Passat that she loves and is having a problem that I notice but she hasn't. First start after the cars been sitting for a while makes it noticeably more difficult to take the car out of park.
I did some searching and I couldn't find the exact issue, but it seems people that cannot remove it from park at all were having issues with the brake switch or something like that. Not sure if this applies to us since we can still get it out of park.
View 5 Replies
This morning as I get in to drive my kid to school (2005 2.7 2 wd auto) as I go to put it in reverse I noticeably have to pull it with some force. I have never had to "force it" before, it had always switched gears with ease. This time it felt very stiff but had no issues going into gear. After I dropped my son off at school I went through the gears up and down and it felt very stiff (at this point i have no issues with starting it or P).
At lunch I go out to get something to eat and when I go to start it up it won't start. I try and try and nothing. All the lights came on, it's not a battery issue at all (brand new). But after 10 tries it starts, so I'm pretty happy. Then I go to put it in gear (reverse) I can not press in the button on the side of the gear shift. It will not go in. I press with all my might and it wont budge. But again, after about 10 good tries at it goes in and I can then select my gear but still feels very stiff.
After stopping again I didn't shut off the engine and dicked around with the shifter basically figured out that my car is not recognizing Park. On the instrument panel each gear lights up but not P. It gets very stiff when trying to put it in P but it doesn't actually go into P. If I put it in P (or really the further up it will go) and shut off the car, it won't start again. I can start it up in N and only N.
View 9 Replies
I have a 1999 Chevy s10 truck 2.2L with 202k miles on it. I have a real difficult time getting my car into gear, and mainly first and second. I my clutch pedal has to be pumped for 4 minutes before it will disengage, and when it does its pressed nearly all the way in. Also, I need to cram it into gear real fast or it won't go in, sometimes it takes maybe 5 times to go into gear. I was all of this is much worse in the winter.
View 13 Replies
Got 2004 v10 and my truck shifts hard into 2nd gear when starting off slow. If I take off at a faster pace it does not do it.
View 2 Replies
Took the wife to work today, she has a big nail in her tire. The X started idling high at red lights, right before I dropped her off, It didn't want to change gears until about 3200 rpms. And change gears hard. About a Mile from home, X started driving normal again...
View 6 Replies
I have a 1998 Passat 4cyl turbo. Recently the ICM module on the air box went out when I had No Fire on 2nd cyl from the front. Replaced it with a MPGauto part for $63. It fixed the problem but, I noticed that now the PRND321 lights are luminated all the time and downshifts hard into 1st gear. Also should I be concerned that I need another catalytic converter b/c I drove another 40 miles with it missing and it (CC) was very hot. Do they break down inside? The car runs great. Is my problem related to this china part not having a special VW code or can the car be reset?
View 1 Replies
1992 Buick Park Avenue, Base. For awhile now I've had trouble shifting into park from other gears. Sometimes, it'll flow right into park without trouble. Other times, I have to work it, to kind of baby it in. However, it simply will not shift into park from reverse. Period. If I'm in reverse and want to park, I have to go into drive, neutral, etc, and then try to move it into park.
A mechanic I know looked at the neutral safety switch and thought it could be causing the problem. We figured it wasn't in the steering column or the cable to the switch because if we disconnect the cable, you can slide that lever all day long. So I purchased a new neutral safety switch and had him install it, but the same problem is there. Actually, let me clarify: while it was in his garage, with the old switch, it would no longer go into park at all, regardless (kind of decided to just stop altogether). At least with the new switch we can baby it into park, but it is basically back to where it was last week. He mentioned it might be deeper in the transmission, but that's out of his league.
View 2 Replies
Could my brake issue be related to my transmission problem? Neither are constant. Brake problem= sometimes the brake pedal feels hard, like there's no power brakes (I drove a car once. ..looong time ago. .. that had no power brakes or steering) but it will kick in after a short distance. Transmission prob= seemingly unrelated, is a problem shifting from 1st to 2nd gear. This has happened maybe a 1/2 dozen times, the first time and mostly when in heavy commute traffic and when going between 1st and 2nd gear because of the slow commute speed, but also at other times when not in lengthy slow commutes. When it doesn't shift, the odometer doesn't work (shows only dashes) and an engine light comes on (the sprocket/gear looking one). Usually the transmission will eventually shift and the light goes off.
I read that the brake problem might be a vacuum hose problem? Something about a booster? Is this dangerous? or is it like having a car w/ no power brakes? Going to have my transmission looked at this week. Read on another site about dropping valve seats on this year car. If there's a major transmission problem, I'm wondering if it's worth fixing? I changed, timing belt, water pump, front and rears brakes, tires. 143,000 miles.
View 1 Replies
I have a 95 Aerostar that when in park it is hard to shift into reverse, drive etc. It is an automatic, 3.0 liter.
View 7 Replies
We had the Excursion parked untill we can get the thing up to have the radiator flushed and new thermostat put in. But we had to drive it today. Had no choice. Well, To our surprise the truck wont go into park. You can shift it untill the needle goes into the "P" like always but the truck will roll and go "click, click, click" as it rolls. It wont start either (guessing due to neutral safety switch). I got under the truck, everything seems tight, I tried to put it in park from the lever on the side of the transmission but it will not move any further. Could the whole neutral safety switch be bad and not fully putting the transmission in park? I can pull it down to neutral to start it and it goes into all gears and moves just fine.
View 14 Replies
PA Base 149,000 miles . My car doesn't start every time. Sometimes I have to wait for a few minutes before it does, meaning, when I turn the key, it does nothing. There's no cluttering or blinking of lights or anything else that would indicate a bad starter, bad battery or electrical issue.
I've had the battery, starter and alternator checked and my mechanic says that everything is good. He thinks its the ignition key or the security system is going bad.
I purchased a new key two weeks ago and it started up every time until earlier today.
In the speedometer and odometer section, specifically the 'Park, R, N, D, 2, 1' section, there's an orange pin-like indicator that moves when you change gears. Mine is stuck between the '2 and 1', even when I place the car in park, reverse or drive. Could this be any cause to my vehicle not starting?
View 5 Replies
My excursion has come out of park a few times. Not good at the boat ramp.....
View 3 Replies
