Ford Excursion :: 4X4 Not Working - Power May Not Be Getting Through The GEM
Dec 9, 2012
I suspect the power may not be getting thru the GEM. Gonna take it to get the GEM codes read to make sure - not looking forward to spending the $ to replace the whole darn gem if it is indeed the problem. Any success story of ever try bypassing the gem or taking power from another switched source?
View 2 Replies
Advertisement
I'm having a problem with my 6.0, My wife to ok my daughter, 16 months now, down to Seattle the other day for a nontraditional physical therapy that we've been trying; she went to leave and when the truck came up to temperature there was no power. By no power, I mean NO POWER. We had the Ex towed home, 50 or so miles, I was on an island at the time. I am looking at starting in on it tomorrow and can't find any similar problems using the search function on here. I starts fine, hot or cold. When hot it idles crazy rough and will not even pull up our drive way because there is no power, it does it when cold. Our drive way is barely the length of the Ex. When my wife read me the stats over the phone nothing seemed out of the ordinary from what I could tell.
View 2 Replies
I recently bought an 02 Excursion. The front seats have been swapped to Lariat seats. (I'm assuming to get the 40/20/40 seats which I love considering I have 7 kids and need to haul 9 people.) When I bought it I noticed right away that the power mirrors don't work. Noticed a few days later that the rear speakers weren't working either. Under the driver seat (its power and heated seat) I found the connector that went to the rear audio controls on the previous console.
I spliced the wires for the rear speakers and they are working now I tried replacing the switch for the power mirrors and still nothing. Could this problem be related to the seat swap or is this a total separate issue? I've got to get a new test light to check for power to the switch...the bulb is blown in mine. Assuming that I check the power wire (orange w/ light green, right?) and it is fine, what's next?
View 3 Replies
So on my 2001 excursion v10 my power door locks won't work. The 30amp fuse under the hood is blown and originally thought it was simply the fuse. No biggie picked up a new fuse... yay it works! Well it did for 2 locks and 2 unlocks then blown. So after reading I suspected it was the resistor inside the door lock actuator. So I did the free mod (taking them all apart and using foil instead of a resistor) got done last night popped in a new fuse... 2 locks 2 unlocks and a blown fuse. So I feel like I wasted a bunch of time doing the resistor mod but whatever,and now im back where I started. So right before this problem started originally one of my boys was messing with the number pad on the driver door. Not sure if its related just thought I'd put that in for out there.
View 7 Replies
My driver side on my 00 x works for the the front 2 windows but not the rear and no other door switch works the windows ...
View 8 Replies
The only control that is working on my driver's seat is the heat. The other controls are not working. I've checked the fuses and tried to recline the seat but that didn't fix. Is there something else I should be looking at?
View 9 Replies
All my power windows aren't working along with my after market radio. All the fuses are good
View 10 Replies
Driver's side power seat not working correctly. It moves fine when I am not sitting in it, but as soon as I sit in it, it doesn't want to work (the motor starts to engage, albeit weakly, then stalls). I have never worked on a seat before, so I don't even know where I should start looking to fix the problem. 2005 Ex Limited. And is there a part I should be focused on? And how the heck do I dissassmble it? I've seen the seat's diagram, but I really can't tell by that how to take the seat apart.
View 7 Replies
My 2003 has the tow mirrors. When using the power mirror control they seem to go opposite of what is intended. So when I want it to go up, it will go out and down. Or something to that effect. What the culprit could be?
View 1 Replies
I have a 2000 EX 7.3L ... The power windows aren't working and neither is the interior lights. I am hoping it is a couple of fuses. Problem is that I can't find a fuse diagram and I don't have any knowledge about changing the fuses. Do I need to change them both under the hood and under the dash? Which fuses I need to look at changing?
View 5 Replies
On a 1999 Excursion with a v10. I've got a strange problem. When the truck is left overnight, the battery is dead. Doing some testing, the is a serious draw through the dome light circuit that controls the Gem and the Tail Lights. If I pull that fuse each night, then the battery is fine. But I can't leave that fuse out, as the shifter interlock switch is disabled by this fuse. All the tail lights seem to work fine.
Dome lights do not come on. I've tested the bulbs. They're good. There is now power it seems to the dome light sockets. The door ajar light works, so I'm guessing all the switches are good.
I also have no power windows working. There is no 12v to the switch. But I heard about the Gem module as well. So I'm not sure if the Gem controls if there should be 12v to the switch all the time.
I pulled out the Gem. It looks good. No sign of corrosion or water.
Any thoughts on what to look for or how to troubleshoot this? Is there a way to test a Gem? Would a bad Gem cause the battery draw down?
View 5 Replies
My power door lock switch in the drivers door stopped working (not the actuator problem, but the actual switch would unlock, but not lock the doors)
I started to research if it could just be simple corrosion and decided to spray the contacts with CRC electronics cleaner. It completely fixed it.
Next, my parking brake light sensor stopped working so I did the same and it fixed it.
I began to research cleaning contacts and found a number of people in the automotive forums who basically spray contact cleaner on every electrical connection they ever touch.
I will do this in the future. The only part I wonder about is if there is something better to spray on them to prevent further corrosion in the future. I used dielectric grease but it would be nice to just spray the thing down. However, CRC does say their electronic cleaner prevent future corrosion.
View 2 Replies
So a few weeks ago my remote quit working. I assumed it was the battery so I replaced it and it's no better. Before I order a new remote is there anything else I should check? Am I going to be able to program the new one without this first one?
View 14 Replies
I have been hearing different things whats wrong but its cold here in the winter and I have 6 kids I need my heater. My heater doesn't work. It will turn on and blow out air but it never gets hot not even a little bit. My AC kicks but heater doesn't work. What can it be???
View 12 Replies
Have this problem?
View 2 Replies
Just purchased a new to me 2003 Ex with the 6.0. The rear AC motor is not working at all. No hot air blowing...nada. I swapped out the 40 amp fuse for the auxiliary blower and still no luck. What should my next move be?
View 3 Replies
Down hill toward intersection with light that turned red. I braked fairly hard and then all of a sudden, brake pedal goes to floor and I go through the light. I pump brake once or twice and still nothing. Luckily I made it through without hitting anyone and eventually stopped with emergency brake. Turns out the line to the rear brakes blew. It was probably weak and maybe the pressure from braking hard blew it. This was sudden. There was no warning whatsoever. Reservoir was empty and practically no brakes in the front. There was enough front brakes to keep the truck from idling forward, but that is it. I thought that I should have had full front brakes with a modern day master cylinder. Looks like Ford blew it with this one. Very dangerous design.
Is there an upgrade available? I never want this to happen again.
View 14 Replies
I have read that I can remove my trip computer and re-soldier my connections. I have looked all over and can not find out how to remover the trip computer to do the repairs.
View 4 Replies
I have never heard my fan change noise pitch since I bought the V-10 Ex four years ago. Could it be working right? It's been through plenty of hot days and idling.
View 14 Replies
My front ac blower fan is not working. I changed the resistor because seemed to be popular answer for fix but nothing I took blower off and straight wired it and it worked so that should rule out blower motor. Right? Swapped relay 103 and nothing...
View 8 Replies
the rear heat doesnt work, the front heat works and the rear AC works fine.
View 6 Replies