Ford Excursion :: 2001 V10 - Door Locks Stuck
Nov 15, 2015
I bought my 2001 with 85k and prepared myself that it would likely need some work. Had cat-back replaced a week after purchase. Next up, door locks - I can hear the switches in all 4 doors trying to lock/unlock, they move ever so slightly which makes me think that due to minor usage over the past 14 years, they are just a bit sticky on the inside of the door panel. Before I go tearing off the door panels. Not sure I uploaded pics correctly....
View 5 Replies
Advertisement
So on my 2001 excursion v10 my power door locks won't work. The 30amp fuse under the hood is blown and originally thought it was simply the fuse. No biggie picked up a new fuse... yay it works! Well it did for 2 locks and 2 unlocks then blown. So after reading I suspected it was the resistor inside the door lock actuator. So I did the free mod (taking them all apart and using foil instead of a resistor) got done last night popped in a new fuse... 2 locks 2 unlocks and a blown fuse. So I feel like I wasted a bunch of time doing the resistor mod but whatever,and now im back where I started. So right before this problem started originally one of my boys was messing with the number pad on the driver door. Not sure if its related just thought I'd put that in for out there.
View 7 Replies
2001 excursion 4'4 V10 XLT.
One or more of my door switches is stuck in open position. Door ajar light on and interior lights on.
Interior lights stay on for about 15 min than go off.
I have sprayed all 4 doors and both rear hatch lock assemblies several times with WD40 and electrical cleaner with no improvement.
When I open drivers door there is no key chime with key in cylinder. Could the hood switch cause this issue? How do I determine which door/doors is/are the offending crimimals?
View 8 Replies
I have an '02 X. I have re-programmed the seat belt alarm setting per the owners manual and set the "lights on after ignition off" to suit my needs.
The one thing that is driving me nuts though is that when I turn the ignition off and get out only the driver's door is unlocked. I want ALL locks to unlock. I haven't seen anything in the manual about this. How to re-program the locks so that they all unlock when the ignition is switched off?
I've put put about 2000 miles on the X now, towing my 5000lb trailer, mild offroading and running around town. It sure puts a smile on my face!
View 9 Replies
So, this 2000 X-Limited that recently bought has an issue.
Power door locks. The drivers door is the only door that works, using either the remote fob or the rocket switch on the door. None of the other doors, or the rear lift glass work.
I have a hard time believing that ALL of the individual actuators in each door don't work.
Does the actuator in the drivers door act as a primary? Are all of the other actuators slaved through the drivers door? Is there a relay between the drivers door and the other doors that could be bad?
View 14 Replies
I have a 2002 excursion xlt 4x4 v10
The door locks quit working. The previous owner did the tin foil repair... I replaced the four door actuators today. Now all of the doors lock and unlock on the manual buttons. The fob doesn't work on any door.. when i try and use the door code pad, the locks go into a cycle.. the keep trying to operate by themselves. I had to disconnect the battery to get it to stop. I can't find the door lock relays. I have most of the dash out. Where these are?
View 12 Replies
After lurking here on FTE for the past several months, I finally had the opportunity yesterday to pick up a new to me 2002 Excursion Limited w/ 7.3 diesel engine. The kids (5yo twins) absolutely love it and even the wife is growing very attached
I think I bought it for a very fair price and it's in just about pristine condition with 110k on it. The previous owner took very good care of it and had just about a full maintenance history for the vehicle. The ball joints and tie rods were replaced at 90k and it still has the original tranny-it does shift very deliberately and solidly though. My first true mod will be to add the 6.0 cooler and a tranny filter to hopefully put off what seems to be the inevitable with the 4R100 transmissions. I'm not thrilled with the wheels/tires and plan on swapping them out asap along with the headlights/taillights.
If there is one particular issue so far, it's that the power door locks don't work. When the buttons are pushed (inside and out), there's absolutely no reaction - not even clicking to indicate that the actuators are bad/stuck. I've pulled the #19 fuse and it's fine - reinserting it doesn't reset anything. I'm wondering if the vehicle security module may be bd? How can I narrow it down to make sure it is indeed the problem before dropping the coin for it plus reset?
View 14 Replies
I did look but couldn't find. So the locks work like a bullet when using the remote. However, they...especially the passenger side door locks are slow. Passenger side struggles to move at all on some occasions.
View 13 Replies
Had the two batteries disconnected on the 2002 Excursion (7.3). Once reconnected, the door actuators all repeatedly lock. They all click every 5 - 10 seconds. Sometimes they click every second for about 5 seconds.
I can't actuate ANY of the door locks on the truck, the switches seem dead. Also, the "door open" LED in the dash is lit. The "THEFT" light is blinking fast as well.
I've disconnected the batteries again several times to see if I can reset whatever is going on. I am keeping a spare key in my pocket because I will get locked out otherwise.
View 3 Replies
I am getting ready to tackle a few projects on the new X. First I would like to fix the door locks. passenger side front, it makes a noise when i hit the lock/unlock button, but doesn't move. Hoping it is the actuator but wanted to make sure first. Is the actuator the first culprit to fix? I guess, How do i know it is the actuator? Wanna order them from rockauto soon. I've researched on here door actuators, looks pretty simple.
View 2 Replies
Car: 1996 Nissan Maxima
The car has an automatic antenna (up/down when you turn on/off the radio). I wanted to disconnect the motor to leave it in the up position. I followed the cables to the antenna (left the coax alone, of course), and cut the 3 conductors that were leading to "a box" under the antenna. NOTE: This area in behind a metal panel.
As intended, the antenna is stuck in the up position. The problem is that I also lost the dash clock, the remote to the door locks stopped working, and the radio memory buttons do not work anymore (the radio comes on in AM every time).
AND here is the mystery; I went back to the cables, spliced them together (correctly - they are color coded) but NOTHING CAME BACK TO NORMAL. The radio is still messed up, remote still not working, and the dash clock is still off.
View 7 Replies
2001 ford explorer sport trac. Power door locks lock from both sides but will not unlock from either side, have tried new switches and lookd for broken wires in all four door jams.
View 10 Replies
I have a 2001 F150 2 door 2wd 5.4 engine. When I put it in gear the automatic door locks do not activate. The procedure for programming the remote does not work either. It calls for turning the ignition switch on and off 9 times, and the doors should unlock, so that procedure does not work either.
I took it to the dealer to have the BCM reprogrammed, they say there is no BCM in the vehicle. The codes they got says there is a door ajar, and the interior lamp relay DTC. I am not sure what the DTC means, forgot to ask.
The door warning light goes out when the doors are closed, and the interior light goes out. They do not seem to know how the system operates. I bought the wiring diagram.
From what I can see, closed lock switch connects directly to the GEM. The dealer told me there is two switches in the door. There is only one as far as I can determine. Ther are two plugs on the locking mechanism, on is for the remote lock, it works. So the lock closed switch is also working.
Reading this forum, I see several cases where people have changed the GEM, and that did not fix the problem. I can not see any other solution, as the door closed switch connects directly to the GEM, and the door open warning goes out, and the interior light goes out.
View 2 Replies
The "door open" light is stuck on and the truck thinks one of them is open. I went around and slammed all the doors and it went off. Didn't think anything of it till we went on a road trip and now its stuck on. No door slamming is working. How to unstick the sensor wherever it is?
View 14 Replies
Was pulling a trailer with a large tractor and had switched the 01 7.3 Ex with 300k miles to 4WD with the switch on the dash. All was fine till I tried to switch back to 2WD.
Then it sounded like I hit some rumble strips a few times and then a constant shake/rumble till I switched it back to 4WD Hi and all was fine as far as the rumble strip feel.
Also, I tried to Manual maneuver the hubs and they are unmovable, but that has always been the case since I got it at 140k miles. I rarely use 4wd so this is a whole new arena for me.
View 8 Replies
2003 Ex rwd 6.0l 125,000 miles. The complete rear left side door is stuck shut and has been for about 6 months. This is not a side door, but the very back where the lift gate is. I sprayed wd40 in there, nothing. It won't budge. If its a broken cable inside, how to I take off the interior door panel to get to the access holes and actuator on that door or both doors on the tailgate?
View 11 Replies
When I use the fob to lock the '02 Santa Fe, the passenger door lock (only when hot outside) locks then unlocks. You can tell because you hear the locks cycle twice in rapid succession. If I use the key in the passenger door and lock the car, no issues; or if it's cool out no issues so something is expanding or dragging when it's hot. Where do I start the trouble shooting? The lock, the cables, the actuator?
View 2 Replies
01 Monte Carlo SS the power door locks do not work - when using the door switches or the key fob. Alarm activates but the doors don't lock. Fuse is good.
View 3 Replies
Power door locks on my 2001 Aurrora have stopped working. It seemed to progress. First the rear door locks didn't work, now the rear and passenger door locks won't open or close with key fob or power switch on doors. I can still operate the door latches manually with the door lock lever. Also the interior lights and power windows to these same doors don't work. I examined the fuses under the rear seat and found nothing blown. What controls all these devices? The driver door operates as normal.
View 14 Replies
I have a 2004 Santa Fe, recently all the door locks stopped working at once. When I use the Key Fob The Blinkers flash like they are supposed to but it does not lock/unlock the doors. The panic button also works. When I use the key in the door it only unlocks that door, meaning when I double turn the other doors do not lock/unlock. Now that this happened all at once I do not believe all the actuators broke at once. Is there a fuse or a relay that might of broke or blown?
View 8 Replies
I have 2006 Elantra GLS. It has power door locks. But when I start driving the auto door lock does not work. Is there a way to check if this model has auto door lock or not. or How to enable auto door locking.
View 1 Replies