Ford Excursion :: 2001 - Takes Long To Slow Down When Slam On Brakes At High Speed
Jul 11, 2013
Recently my brakes were feeling a little spongy so I took my X to a local shop who installed new front and rear brake pads and flushed the brake fluid. The brakes seemed to operate properly.
But, then while driving on the interstate in Tampa, I had to SLAM on the brakes but it seemed like it took forever to slow down. It's hard to describe, but it's like when you are moving at interstate speeds and then you have to SLAM on the brakes, the X just slows down and comes to an eventual stop. It does not stop quickly.
I do not feel any pulsing from the antilock braking system so I don't think it is being activated for some reason. This seems to only happen at faster speeds. I have no problem when driving around town and slowing down for stop signs or red lights. It slows and stops just fine.
So I took the X back to the shop and they replaced the Booster w Ford booster. I thought I checked it out as soon as I picked it up around town AND on the interstate.
But, today I had to SLAM on the brakes while on the interstate again and it is acting just like before - just slowing down, but not fast and without the antilock brakes activating (apparently).
View 8 Replies
Advertisement
From stop. When I accelerate it takes a long time to get to drive. It feels like a lag time. What is wrong with my car?
View 3 Replies
i have a 1998 chevy blazer 4.3 4wd v6 about 130000 miles on it. There is no check engine light on at all. Some reason it takes long time for it to get up to speed.and i can't figer out why that is i did replace spark plugs in it..
View 11 Replies
I was driving on the highway in my 2001 jetta (332000 km) on the cruise control yesterday and suddenly it just started slowing down and stopped. Putting my feet in the gas did nothing . Before stopping completely the battery light came on. After won't start anymore, just making a sound like it is trying but turn in the butter. To be honest the check engine has been on for a while but we are pretty sure that is the glow plugs because it is a recurrent problem... Nothing else light up and there was no sound or smoke.
View 3 Replies
I came off the turnpike the other day stopped at a light and my car, 2006 Hyundai Elantra 175000 miles, started rolling backwards. I put my foot on the gas and there was no movement. Put the car and park and it wouldn't start. I pushed it into a gas station and the attendant (attendant, not mechanic there was no service station) changed the oil and added some coolant. The car then started up fine and I was able to drive a quarter mile to work. When I was driving home I immediately noticed that there was a change in acceleration. It takes forever for the car to speed up... Pedal to the floor and it is lagging greatly. It seems to be going up to 4500 rpms just to reach 40 mphs at a slow pace. Once the car gets up to 60 mph the rpms drop to normal. I haven't gone faster than 60 mph in it since this happened, but it seems to handle fine at that speed. The issue is getting up to that speed. I don't know if it is related, but the air conditioning is very weak since all this happened. I have to turn it off when I'm accelerating now. I've been planning on buying a new car soon, but I want this one to last just a little while longer.
View 7 Replies
I have a 2009 Ford Focus and have been having a problem with the brakes. When I hit the brakes at any speed there is a feeling of pulsing as I slow down. It is proportional to the speed I am going. It feels like there is an unevenness to the rotor or brake drum that makes one spot on either of those hit the brake pad/shoe more severely than the rest of the pad/shoe and thus I slow down more during that one spot. Maybe the best way to describe the feeling is like this: While the brake pedal is pressed down it feels like I am slowly pulsing the pedal even though the pedal is steadily pressed down. This pulsing feeling slows down as I slow down until I stop. What might cause this?
View 3 Replies
I took my 2011 Lariat in for first service and reported that it sometimes tries to accelerate on its own during slowdown from high speed, eg when coming off a freeway ramp, rpms go up and vehicle wants to speed up rather than slow down. (sounds like something a Toyota would do!)
Dealer says its a known problem with 5.0L and performed a supposed fix per "TSB 11-8-9, 5.0L ENGINE BRAKING PERFORMANCE DURING LOW SPEED COAST DOWN," essentially a PCM reflash.
Happened once in a parking lot...thought the floormat was stuck on the accelerator but the pedal was clear.
View 4 Replies
Little back story, truck sat up for 2 years. Had 1/2 tank of gas in it that time. I had to do a complete motor swap. I been driving for past couple of days. Had it stall on me while I was waiting on wife to come out of store. Thought it was just bad gas. Today I was heading to town and had to slam on brakes and it started to stall again. It shut off. I cranked it back up and it runs fine till I start slowing down. then it wants to die.
I can keep my foot on gas petal and little and it will stay running. I got to where I was heading and put it in park and it idled fine for a few seconds and then I could hear a whine from the fuel tank. Sounds like the fuel was having a hard time, like it was fighting the pressure build.
Thing is It cranks right back up and drives fine as long as I dont come to quick stop or set idling for a few seconds. I can hear the pump straining, so I am assuming that when I keep my foot on gas a little the pressure is staying lower and not as much is being bypassed and the pump is fine. I think the pump is on its way out but wanted to hear what yall think.
I do have a brand new IAC valve that I bought and did not get a chance to use on the blown motor.
View 10 Replies
I bought an 02 Explorer Sport 2wd back in December of '12. The vehicle actually runs pretty well. The thing I first noticed was the rear suspension seems to slam when going over bumps of almost any size or at any speed. Like if there's a sub-level manhole or something that just the passenger rear tire goes over it makes this terrible slam and sometimes shimmies (Spell check) to the sides like Inam losing control. I thought I would go ahead and change the shocks, did not make one bit of difference. I have looked up diagrams on the rear sus and everything seems to be there. Here's a picture just to kind of show what I have going on.
View 1 Replies
I have 2008 VR6 4 motion wagon with about 98K miles. It has been relatively trouble free and I love the car. To try and make it last I am trying to stay on top of maintenance. I had a VW warranty until 72K and got several things fixed along the way. But, I had asked about the one weird thing it does well before it went out of warranty to no avail ("no trouble found").
The weird thing is that sometimes it sort of stutters when I slow down from a high rate of speed quickly, like exiting a freeway. I described it to my new mechanic (no longer beholden to the dealership mechanics) when I was speculating a new transmission might be in order at some point and he said it was probably an issue with the program that tells the transmission when to downshift and to ask about a software update. I did; none available.
Is it firmware related, how to get it fixed?
View 2 Replies
Just 2 months old car with 1100 miles on it suddenly chokes, vibrates profoundly when it slows down from high speed and turns the check engine malfunction light on ...
Dealer checks and finds following codes P0171(too lean), P0441 Purge & P0455 Gross leak ...
View 19 Replies
Recently, my 2003 manual honda civic accelerates very slowly, even the engine speed goes up to 4000 rpm. Usually it takes up to 1 minute to reach 60mph on high way. Is the clutch getting bad?
View 5 Replies
If we have the air on a medium or high setting (A/C or just vent air) and coming out of the middle vents (at your face in other words), then turn the car off with the fan speed on that medium to high setting, then turn the car on later, the air comes out of the defroster (windshield) instead, even though the middle (face) setting is selected.
I have to turn the air fan speed right down to the lowest setting, then the air switches to the vents (face), and I can then turn the fan speed back up again. Its like it has a weak flap or something in the dash that diverts the air around. Car is an 03 6.0l limited with the "climate control" (the buttons and digital display).
View 6 Replies
I'm thinking this is probably just the way they are, but I don't understand why........... I have a '12 F250 supercab 6.7 FX4.... truck is an XL, no supplemental heat or anything. If it sits outside over night, and I go out in the morning after say a 35-40 degree night, start it up and let it run 10-15 min then drive 5 miles down the road to town, both temp gauges are still pegged on the cold side, and there's virtually no heat blowing on the defrost. Even if it sits in the heated garage over night, same temp, same drive to town in the morning, same lack of any heat.
My old 2010 V10 that I traded for the 6.7, and my current 09 5.4 are the exact opposite of this. I can start the 5.4 cold, leave within a minute or two, and be making some heat within a few minutes. By the time I get to town, everything is well in the normal range, and I'm turning the heater down cuz it's too hot. Even once the 6.7 is fully warmed up the heater doesn't seem to make near the heat that the gas trucks do. I love the 6.7, I just find this a bit odd. Am I missing something, or is this just the way they all are?
View 14 Replies
Hard shifting from the car. sort of a slam between gears and while in gear.
Possibly a mount?
View 7 Replies
I've got a 03 x with the 6.8 2wd 4r100. It was flaring pretty bad for a while going into lock up, about 2 months ago the flare went away now NO lockup. Its taking more pedal to get moving and alot more slip, once you reach cruising speed tranny goes into high pressure. Told to replace the selonoid pack, got one use from a tranny shop from a tranny that lost reverse, got it home took mine out and found out the new one is not PWM and mine is, I tested my selonoid by putting 12v to pin 1 and 4 and nothing (on the pwm pack) did it to the new pack and it works. My question is what will happen if I put the non pwm in my tranny that originally had pwm pack in it?
View 2 Replies
My cruise light will activate but won't hold speed, it shuts off when I tap the brakes. I did the self test and it went through complete. All buttons worked. After the test it did not show any blinks which according to the chart shows speed control switch faulty, I replaced the switch and does the exact same thing. The recall was also done.
View 8 Replies
I know that average normal tranny temps for the new 6.7s are 200 degrees give or take which my truck does as well. but I'm wondering about how long is normal for the tranny temp to get up to that normal range? My truck can take anywhere from 20 minutes to almost an hour depending on if I'm on highway vs lower speed driving and it's been that way since I bought it. Am I worrying over nothing or my worries not just worries?
View 7 Replies
I have a 2003 Impala, total mileage little of 122,000 miles, I bought the car back in Dec 2014. When I bought the car I got all the paper work on the work the dealership did on the car prior to me buying it. One of the things they did was put new brakes and rotors on the front. Since then I have replaced the backs. However after about 4-5 months I notices that from the front passenger side when I had to slam on the brakes or was braking from high speed I would hear a grinding sound coming from that area. I have taken it to two places and both have inspected both the wheels and rotor's and say they are fine, they commented that the pads were not the best but more then adequate for this car. Of course when they drove it around it didn't happen and it doesn't always happen. Both places said it could be the pads or rotors but without replacing them there is no real way to tell. How can they both be viewed as good and in good condition and I get this grinding sound from the one front wheel from time to time when I break.
View 12 Replies
Monday I started my truck after leaving it in the garage while on a 8 day vacation. Shifting into reverse led to almost no movement at all. After a few seconds, I shifted back into park and then reverse again and got a solid reverse right away. I may have noticed sluggish shifting into reverse previously, but not this noticeable. What could be the culprit?
2001 Excursion 7.3 4x4 .....
View 14 Replies
So tonight, I lost most of my brakes. If I kept at low speeds and pressed the pedal to the floor I could eventually stop, but not well. I imagine this might be more of a general question not specific to Ex's, but I thought I would start here.
View 4 Replies
