Ford Excursion :: 2001 - Rattles Going Over Bumps / Uncontrolled Steering And Seems Floating
Aug 3, 2014
I have a 2001 excursion, v10 4x4 just bought it used thinking I scored until I drove it home (mostly noticeable on freeway, which I didn't do while on my test drive) the steering wheel stays straight, but the truck doesn't stay straight in the road lines,the car turns!! Feels real loose , I hear rattles, rattles going over bumps but mostly real slight uncontrolled steering and seems floaty. Is this a common problem? I did a little searching and found some posts about rattles but noble about sloppy steering.
View 8 Replies
Advertisement
When I drive on the freeway and hit uneven paving or bumps the car feels like it's hydroplaning for a few seconds then is fine when surface levels out. What it might be? It's got 168k miles and probably time to get rid of it but would like to sell it and want to fix this problem.
View 9 Replies
My steering feels a little floaty. My dad, who drives an A6, yanked the fuse on his power steering for the same reason.
View 4 Replies
I just purchased a 2002 sc430 and the steering was nice and solid. It needed new tires, so I purchased them at tire kingdom. they told me I needed a steering flush (lexus did as well at my oil change) so I to0ld them to do the flush. When I got my car back, the steering was so flaty, I have to keep my hand on the wheel all the time, they gave me an upgraded tire, to the falken, felt a little smoother but still floaty. brought it to lexus, they said it was the tires. the rear needed 255 and front 245. they upgraded the tires again and I still have the floating steering wheel.
View 3 Replies
I just recently picked up a 2001 F-150 4x4 super crew. The steering column is wobbling a little when I hit bumps. I accessed the column and there are two white plastic "bushings" that hold the casted portion of the column tight against the studs with the star ends. This is above where the reinforcement bracket is bolted on. One of them is worn and won't tighten down to hold the column tight. What these are called so I can't find them to order them, I used a large washer for the time being but would really like to replace with new ones.
View 1 Replies
Well, I had a friend put together my front brake rotor, now no more pulsating when coming to a stop, very smooth stop, new front brakes, had it aligned as well.. Also replaced the front shocks, however the passenger side came loose and rattles when going over bumps, speed bumps. I popped the hood, bounced my truck and could see it moving from left to right when bouncing front end of truck.
Question is, can i tighten it up myself, I dont have a jack, limited tools, I know, I know but i dont at the moment. My friend that worked on my truck lives a good drive and i hate to waste gas just for tightening something that should have been done but i have too, I will..
View 3 Replies
So I finally decided to look into all the little creaks and rattles that the R makes while going over bumps in the road.
-Wrapped the latches of the rear seats in electrical tape, and put adhesive velcro (soft side) on the back of the seats where it meets plastic.
-Took apart the center console and put adhesive felt around the areas where plastic makes contact with other plastic
-Put adhesive felt inside the aluminum trim & Monsoon radio to stop shaking
So all those little fixes eliminated most of the rattling sounds in the car. All that I need to look into are the driver and passenger doors to secure whatever is rattling/shaking inside those panels. Something to do this coming week. I normally would leave these noises alone, but damn they drive me crazy like it's a form of Chinese water torture. I hope to have no more rattles in the following week.
View 10 Replies
Recently bought a CPO 2010 RX350 with 57k miles on it at a dealer on 8/30/14. Its developed quite a bit of interior rattles and creaks from what sounds like the structure over bumps and roads that aren't smooth. Plus the sunroof has a high frequency rattle. None of these were present during the test drive.
View 9 Replies
2009 Prius bottomed out last week and twisted up the bracket that runs the exhaust system in the center of the car. Tore one side totally out of the frame. Consequently, exhaust now bumps and rattles on said bracket. I removed the bracket this morning to get a look.
View 2 Replies
I notice the door rattles a lot now, more noticeably over bumps. Also, I don't really turn my music that loud, but when it is I can hear the rattle as well. Any quick fixs for this? Or would it be easier to get the dealer to try to fix this during my 5000 mile maintenance?
View 6 Replies
The back of my passenger seat rattles, resonating when going over bumps (and not weighted with a passenger). I've lifted my back on the driver's seat and it doesn't seem to rattle over the same bumps. How to tighten it up?
View 4 Replies
2006 with 110K. I did a search for rattles. My question is do these struts have bushings or shims that wear out over time. Going down the road car is nice and quiet. Hit some bumps and it sounds like it is coming apart.
View 5 Replies
When ever my Camry its a rough road the trunk rattles like their is something moving around in it, however there is nothing in the trunk, I checked to make sure the spare was secure and it is. What could be the problem?
View 2 Replies
I have had my prius IV with solar roof for a few weeks and when the roof is open and i go over any bumps or rough roads it rattles and the amount of noise varies depending on the position of the roof.
View 12 Replies
I noticed my 2014.5 camry has a loose driver's window. When rolled down between 2 to 6 inches, it rattles when driving over small bumps If I actually feel the window, it moves about 1/8 inch to the sides when open 2 to 6 inches. I mentioned this at my one year service. The tech showed me other 14.5 SE's they had the same problem only on the driver's window. He said the dealers can't do anything about it because it is how Toyota designed the cars.
View 1 Replies
I have 2001 X V10 4WD. It has a really touchy steering to it. you barely move the wheel and you are moving. I have had a Les Schwab tires check out the suspension and alignment and everything checks out fine. I was towing our 31 foot trailer with a equalizer hitch and I was fighting it the entire way. Is there anything can do to improve the steering?
View 5 Replies
I recently replaced Sway Bar Links on my 2000 X (V10, 4x4, 155k). They were only a year and half old but the bushings had gave way. Mechanic went with an OEM part with a new design from NAPA. This new design added grease fittings. Now the truck rattles constantly and seems to have more sway. Shocks are probably originals, but I don't think they are the main cause. I can tell the rattle is coming through the frame. All my suspension is stock.
View 14 Replies
My 'new to me' 01 Ex has 129k miles on it and the one problem is the steering. I read (all 34 pages of) the wander cure thread and I played with my steering box extensively over the last 3 weeks. The initial tightening really worked with the slack in the steering, as did adding air to the passenger front tire to even it out with the driver's side. But it did not cure everything. In fact, the tightening of the box revealed something else - the steering now exhibits what feels like binding. And now I must make minute corrections every second or two all the way down the road, even perfectly straight, flat roads. It's sorta driving me crazy(er) and my wife won't even consider driving it until it's fixed.
I was so caught up in diagnosing this problem that I completely missed that the steering wheel would not re-center itself after turns. My father noticed when he visited last weekend and tried to drive it but parked it after going around the block. If making a 90 degree turn, the wheel will maybe make it back to 45 degrees and stops. So you must manually turn the wheel back to center if you want to go straight.
So I've gone back and tried to loosen up the steering gears to start again, but now the gears seem tight regardless of how I adjust it.
I have already planned to replace the ball joints and get the alignment adjusted when I do the shocks and rear sway next week. Should i wait to see if the ball joints fix the problem or should i plan to replace the steering box at the same time? What say you all?
View 14 Replies
I am the original owner of a 2001 Ford Excursion with about 262K miles on it. I have thought about selling it more than once but I have finally come to realize that this is a very sturdy and reliable truck - so why sell it?
With that said, there are a few items that I need to address. The most important right now for me is to get the steering adjusted some how to eliminate the looseness. It is especially noticeable when driving on the interstate, I guess because I am traveling faster.
I am not a skilled mechanic but I do want to learn more about performing some of the simpler maintenance items since I have lost faith in the auto repair shops.
View 10 Replies
I have an 01 Ex, 6"lift, 35" tires, 185,000 miles. I have gradually gotten to this point where the steering is very loose. I can roll the steering wheel back and forth with out "catching" the wheels & with the bigger tires, they catch grooves in the road & pull the vehicle side to side. I took in to a reputable 4x4 shop & he suggested the steering gear box was going bad. So I had them replace that. That did solve about 50% of the problem. So what is the next thing to look at??? Ball joints?
View 12 Replies
got an issue with my 01 excursion. When driving the steering wheel with vibrate or shimmy. As in if the rotor maybe warped or tire has a small bubble in it. Here is the kicker. It does not do it all the time. Some times I can drive it and it drives just as smooth as can be and I can go all the way to town and back. Then sometimes I can drive it to town and either turn a curve or hit a bump and then it will start doing it. Then I will come back home. Then the next time i jump in it and start driving down the road and it is just fine. I just had the brakes and rotors were just changed.
View 6 Replies
