Had to get a replacement door due to a wreck. It's from a salvage yard, painted and ready to install except I want to swap my door handle over because of the key lock. I cannot for the life of me figure out how to remove this thing. I've got it unbolted and it'll move all around, just not slide out.
View 1 RepliesMy daughter has a 2001 Ford Escape. The small panel insert around the door handle has the vinyl/leather coming off. How do I remove this without taking the whole door panel, the large one covering the window, off? I do know what I have to do to reattach this fabric, just cant seem to get teh small panel to come off.
View 14 RepliesI am pretty satisfied with the performance of my 2009 Ford Escape. Two years 51,000 miles after I find that the rear door does not open. Following threads of earlier Escape models I find how to remove the inside panel and open it manually. After a thorough study all I need is a replacement latch motor. The plastic latch cover has the following number GA6 GF30.
View 14 RepliesSteering column recall ? The ford sites don't have much info yet. What is involved steering column replacement ? Computer reprogramming to sove the issue of the steering ?
View 1 RepliesRemoving the old cracked rubber brake line hoses on my daughters 2003 Ford Escape. Front left no problem. Old off, new on in 5 minutes. All the other won't come free. Can break nut loose, but just spins & spins. What is going on here? Did search and should be very easy.
View 6 RepliesI'm replacing the ignition lock cylinder on my 03 Escape. The factory cylinder has the little black "wings" that nestle around the key when inserted:
The locksmith says the replacement cylinder needs to have those same wings for him to be change it. Is this correct? The auto part stores have the regular cylinder (with no wings) readily available, but the one with wings is a special-order item and I need this sooner rather than later.
Plus, the wingless one includes keys while the other appears to have none.
We are a 2 Escape family. We have an '03 and an '05 - both 4WD and 3.0 V6. My college freshman son purchased the '05 this summer to get to and from his summer job. It has a little over 173K on the clock and it has a power steering leak, so I decided to try to tackle this one.
There is a fairly good video on YouTube on replacement of the power steering pump on an '03 - but apparently on the '05 Ford decided to relocate the pump from under the upper right engine mount to a lower location closer to the front bumper so the video is not of much use in this case.
I have searched the web and this site but cannot find any tips or instructions to replace the power steering pump on the '05. The Chilton Manual I have does not acknowledge the difference in the power steering pump location on the '05 and only provides the procedure for those Escapes where the pump is located under the upper engine mount.
I think I may be able to get better access by removing the inner fender plastic and perhaps the front bumper cover, but would really like to know the accepted procedure before I start tearing into this one.
One interesting bit of info regarding power steering fluid on these vehicles. Ford designed them to use automatic transmission fluid (Mercon) instead of power steering fluid. Initially, when I saw the leak, I thought it was a tranny line leak. Then I traced it to the front of the engine which is totally on the opposite side of the vehicle from the tranny lines.
My flex pipe recently broke, and as a temporary fix I pieced it together using a universal flex pipe and some exhaust tape and clamps. When shopping around, I came across this:
Walker Exhaust Pipe 50465 - Read Reviews on Walker #50465
Is this an OEM part for a 2008 ford escape 3.0? It looks somewhat correct, although I do not remember seeing the other two fittings in that picture on it. (It looks like the end with the flex pipe is the end that connects to the catalytic converter, and the other two connect to the front and back headers on the engine, but I don't recall seeing a fitting like whats on the end of that flex pipe on my car (It could be that it was cut off, too).
If this is the OEM one, then perhaps the original exhaust shop cut off the fitting between the cat and where the flexpipe attaches. Is there a way that I can get parts to re-make this section of exhaust so that I can use this piece? The flex pipe they originally put in was too big and it came loose again forcing me to have to rig it again since I can't weld, and needed to get it fixed quickly.
I really do not want to replace the entire exhaust system if I don't need to, and hoping I don't have to.
2004 F350 Lariat Crew Cab. My truck has been repeatedly attempted to be broken into through the keyhole. This time they fully punched it through the door, and now i have a hole where the lock should be.
I researched stuff like jimmi-jammers etc, but for the time being.. I am looking just to pick up a set of handles without keyholes. I have remote-less entry and keypad.
Couple questions... Would rear door handles off a crew cab, fit to the fronts? they look the exact same minus the keyhole.. and this would likely be the easiest to find.
Or... Is there any good websites i can take a look at that will manufacture keyless front driver and passenger side handles? They're textured black, and i would like them to match as best as possible.
2001 ford escape. cannot open back door and glass. there is no kep option, only auto and they are not working. checked fuses, all other doors working fine, I was hoping to move this weekend and need to get in the back door. Is there any safety latch? or possible child lock?
View 14 RepliesI wanted to try FordJunkyNC's way to run a jumper to stop the alarm from going off, but my problem is the passenger front, not the rear... different color coding on the wires..
Jumped the passenger front door? If so, which wires did you jump? Want to jump the 06 Escape doors, just don't want to short anything out...
Just notice that the interior door handle light up amber color at night. Need to modify this bulb on the door handle enclosure? Any complications removing the door panel or other parts to access the bulb? Last of all, what type of bulb?
View 4 RepliesMy 2003 Escape 2.0L has the "door ajar" light on the dash permanently lit, including with the engine off and key removed, which means that I have to switch the courtesy light on and off by hand or else it stays on.
Obvious first guess is a fault with a door or tailgate switch, but they all look OK to a visual inspection. Are there any multimeter tests I can do? Any specific voltages, resistances to look for?
The passenger door on my 2002 Escape is locked and the power lock is not working on that door. The door is closed, how to get it open.
View 14 RepliesMy front interior light/map lights combination does not come on when the doors open. The rear seat and cargo area lights work when the doors open. Do the front interior lights are not designed to work in conjunction with the other lights when the door is opened?
View 6 RepliesI need to find a diagram of the door panel on the drivers front door. Need to see how to remove the switch bezel to check the power window switches.
View 2 RepliesI need to replace a broken door handle. It looks as though some white plastic has broken on the inside. I found the handle online to order, but what do I need to do about the broken plastic on the inside?
View 5 RepliesI had my '09 F-150 Super Crew lock punched out on driver side door. To prevent this from happening again, I am replacing that handle with a handle for the rear door that has NO lock. I will no longer have key access to the truck. I am also ordering a spare remote. Is there anything I should consider before following through with this decision? Why I shouldn't do this? Is this a common thing to do?
View 14 RepliesI am finding that after a heavy rain that water is running out of the bottom of all four door drain holes when I open them.I have not noticed this on any other of my previous vehicles.Is it "a" good that they are draining well, or "b" bad that water is getting in in the first place?
View 11 RepliesMine broke off, I have a new one and is painted and ready to go... How to replace it and or an exploded view of it to replace it.....
View 2 RepliesSo I am changing my transmission fluid tomorrow and was wondering a few things.
1. I noticed some people pull off the transmission hose to the inlet and keep draining that until its clear. For a drain and fill do you do it like that or just pull the plug and refill?
2. When youre filling it back up you just measure how much you taken out and then fill the rest by the dipstick? Anything else i should know?
3. Since I havent changed my transmission fluid in 60,000 miles. I wanted to do a drain and fill. I was thinking I needed to drain and fill it 3 time to catch up to maintenance. How often would you do it to get it clear? Drain and fill then drive it for a week then drain and fill? Or do it all in one day?