Ford Escape / Hybrid :: Clogged Drain Lines - Water Will Flow Back To Relay In Fuse Box?
Oct 5, 2014
Is it true that if your drain lines are clogged water will backflow to the relay in the fuse box?
View 3 Replies
Oct 5, 2014
Advertisement
Ford Escape / Hybrid :: Water Is Running Out Of The Bottom Of All Four Door Drain Holes After Heavy Rain
I am finding that after a heavy rain that water is running out of the bottom of all four door drain holes when I open them.I have not noticed this on any other of my previous vehicles.Is it "a" good that they are draining well, or "b" bad that water is getting in in the first place?
View 11 RepliesFord A/C :: 2010 - Water Won't Flow Through Lines?
Water won't flow through lines for the heat to reach the back of the van. Have checked everything that could be blocking the water flow.
View 1 RepliesSonata I45 (YF - 2011+) :: Water Leak Inside Cabin - Clogged A/C Drain?
For the past couple of days i've had condensation on the windshields during cold mornings and nights and thought something was up. I looked around and found the carpet on the driver's side of my car is damp and there was a puddle of water directly underneath the seat. I've read it might be a clogged AC drain or something like that. Some solutions seem to be either blowing the AC drain underneath the car with compressed air to get rid of a clog, or finding the tube inside the car and properly reconnecting it incase it got dislodged or kinked somehow. Or does this sound like a different problem? Again only the driver's side carpet seems to be wet.
View 1 RepliesFord Super Duty (1999-2016) :: Water Splashed On The Passenger Floorboard / Wiper Cowl Drain Clogged?
Ive got a 99 F250 (5.4 if that matters), after a good long rain like the one we had this weekend, when I drive the truck I get water splashed on the passenger floorboard. It hold enough water that if I rock the truck side to side I can hear it sloshing. I am wondering if there is a common drain for these things that gets clogged. When my a/c runs I get a nice puddle under the truck so it looks like that is not clogged up, and I didn't know if they were the same drain or not.
View 11 RepliesFord Escape / Hybrid :: EVAP Purge Flow Valve Sticking
Replacing part 9C915 ?
"CODE P0443 canister purge fault" diagnosed....
Found: EVAP PURGE FLOW VALVE STICKING
Recommending: "Diag, Replace sensor then retest" ....
They want to install a new 9C915 which they called in hand writing a Canister purge sensor but I've seen it called a canister purge valve on another thread by FIREME who puts 9C915 as "toward the driver's headlight assembly, near the radiator. You'll need an 8mm socket to remove it"...
3.0L DURATEC FFV V6 ENGINE
From the "newly washed ashore" who's now double posting after being flogged for trying to keep this info in a single thread rather than spreading it all over the place...
Ford Escape / Hybrid :: 2005 - Diagram Of Relay Side Of Panel?
Owner of a 2005 Escape and trying to figure out which relay on the interior fuse panel is the Accessory Delay relay. I think this might be causing a battery drain when everything is shut down. A diagram of the relay side of the panel.
View 5 RepliesFord Escape / Hybrid :: Water In Gas Tank?
How can I test to find out if there is water in my fuel tank , fuel lines, etc. The symptoms are obvious, how do I test for sure. In the event that I'm correct, what can I do to get it out of the tank and fuel system.
I suspect that a lower form of life has put water in the gas tank of my 2003 Escape 3.0L . I sent it to a shop, that was a nightmare . They came up with every misfire and etc. Including bad windshield wipers burned out light bulbs .
Trying to sell me new coils plugs , etc etc ... even though I kept telling them that of course its misfiring if there is water in the fuel. Please test for water in the gas .
I finally went and took the car with intake plenum pulled off. Paid them half of R&R for pulling the plenum and I'm back to square one. They did everything but check for water in my gas tank or fuel lines.
Ford Escape / Hybrid :: 2006 - Fuse 26 Keeps Blowing / HVAC Blower Motor Turned Off
I have a 06 Mercury Mariner and this past week fuse #26 keeps blowing turning the HVAC blower motor off. I replaced the blower motor since i had one already in the garage and same thing is happening. The AC will run for awhile and in about 10/15 mins the fuse will blow. Fuse #26 is the Climate control system mode switch, are these known to go bad? Is this the part I should replace or look for other problems IE compressor?
View 2 RepliesFord Escape / Hybrid :: At Rear Hatch Water Leaking?
Water leak at the rear hatch. The water is coming in from the door, not the glass. I have wiped the weatherstrip clean, in case some debris was stopping it from achieving a complete seal. It is also happening on both sides.
View 9 RepliesFord Escape / Hybrid :: 2008 V6 - How To Change Belt On Water Pump
How to change belt on water pump on my 08 V6 the hayness says there is a tensioner on the v6 well i am stumped cant find it so ....... Belt is tight I see no way to get slack in belt to change it .top pulley and pump pulley is all i see...
View 11 RepliesFord Escape / Hybrid :: 2009 - Water Dripping From Passenger Handhold
Where I should start looking for the root cause of the following leak? My wife noticed that when it was raining water dripped off the handhold by the front passenger seat. The ceiling liner is dry, no evidence of water soaking into it. I am thinking windshield or door seal as there is no moon roof and the liner is dry but before I start tearing into it I want to see if there is even a chance I can fix it myself.
View 3 RepliesFord Escape / Hybrid :: 2008 - Coolant Leaking / Refill Reservoir With Water?
i have a 2008 xlt ford escape and i have coolant leaking issues, my reservoir would empty so i had to refill it with water. and then i let the car run but nothing leaked so i turned the AC on and it started leaking so i investigated further and identified the source. i, am not sure what is it, it might be a lose hose or something else.
View 3 RepliesFord Escape / Hybrid :: Back Door And Glass Won't Open
2001 ford escape. cannot open back door and glass. there is no kep option, only auto and they are not working. checked fuses, all other doors working fine, I was hoping to move this weekend and need to get in the back door. Is there any safety latch? or possible child lock?
View 14 RepliesFord Escape / Hybrid :: Back-up Assist On / Off Button Is Intermittent
Why my BU assist on/off button is intermittant? It comes on and off when "it" wants to but won't respond when "I" push it. When it's on, it works fine but when it's off, I can't turn it on but the "off" light is still functional. Switch, relay, sub computer?
View 3 RepliesFord Escape / Hybrid :: 2011 - Adding Back Up Camera?
I just purchased a 2011 Escape to live with my 7.3 Excursion. I want to install a BU camera in the Escape. The mirror has wiring to it, do not know why.Can I use that exiting wiring? What was it for and where does it go?
View 1 RepliesFord Escape / Hybrid :: Liftgate Seal Leaking Rain Water Into Latch And Electronics
In this video I go over what is becoming more and more of an issue with this generation of Escapes due to the poor lift gate glass seal leaking rain water into the latch and electronics in the lift gate. I go over the cause, how to gain access, diagnosis, and of course repair.
Ford Escape Liftgate Won't Open- Repair - YouTube .....
Ford Escape / Hybrid :: Water Pump Belt Squeaks For 15 - 20 Seconds After Cold Start
2 questions regarding my 2005 Mariner 3.0L, as follows:
1. After a cold start (in the garage, so not freezing cold) the water pump belt - not the serpentine belt - squeaks for 15 - 20 seconds; ambient temperature doesn't matter. I had put a new belt on about a year ago, then this began 6 or so months later. Thinking I may have a defective belt, I replaced it again about 3 months ago, but the squeaking has continued - starting immediately after the replacement. My analysis is that the water pump bearing is going south. I've noticed that it is taking a little longer for the squeak to go away in the past few weeks, so it's probably getting worse, altho no leaks at this point. So the question is, so any other reason this is happening?
2. Assuming I do need to replace the WP, I bought a new one from the local parts house. I have a shop manual for the car, which tells me to remove the thermostat housing, hose connection to the WP, etc., and then remove the WP by removing just 3 bolts. However, the replacement part is just the front of the housing with the impeller and pulley included, so there are a half-dozen or so bolts that hold this new part onto the WP housing. So, doing this change-out? Will the front of the WP housing come off by itself without disconnecting the hose, etc., or do I first have to remove the whole WP and then take it apart to replace the impeller and front cover? I can't really tell from the pic in the shop manual, and it doesn't address dis-assembly of the WP.
Also, I'd like to just remove the belt w/o cutting it and having to buy a new one. Can I do this by just loosening the WP bolts? (I know how to re-install, obviously.)
Ford Escape / Hybrid :: 2008 - Cracking Sound When Turn Steering Wheel Back And Forth
My wife's having some car trouble. When I turn the steering wheel back and forth there's a cracking sound and I can feel it into the wheel. And now the steering's gotten really stiff.
View 1 RepliesFord Escape / Hybrid :: Slow Reaction Fuel Gauge / Whirring Noise When Shutting Off The Car And Turning It Back On
My fiance drives a 2006 Escapse XLT v6 AWD. It's really a great car.
She noticed an issue when she filled the fuel tank the last time. It took about 8 miles of driving for the gauge to read full after being filled from empty. She also told me there was a "whirring" noise when shutting off the car and turning it back on. I checked it out and found the fuel gauge is making a noise. Whenever you shut it off or turn it on and the needle moves there is a distinct whirring noise that sounds like dirty plastic gears meshing, which is what I'm assuming is the issue.
I've done a search and came up with 0 results. Can the cluster be disassembled and possibly just clean the gears?
Elantra MD (2010-15) :: Windshield Fluid Pump / Lines Clogged
So recently I decided to add some fluid to the windshield washer tank, but when I added some, a clump of slime fell right in. Needless to say I couldn't do much about it. Now I have no fluid running through the system. What could I do to purge the junk out of the system? And where is the pump that drives the system?
I figured out I would have to remove the bumper to get to this part. In theory I could take it up to the dealership ...