Ford Escape / Hybrid :: 2001 - Clanking Sound / Shutting Off At Stop Lights?
May 11, 2017
Today after school I hopped into my car and turned it on, it made a weird clanking kind of sound, but then sounded normal. I turned it off and it did the same thing again. I put the car into drive and it was so slow accelerating. I had my foot to the floor and it was barely catching speed while my rpm was somewhere in the 5000's. I got home and I don't know what to do. ALSO, when my Escape is at a stoplight, it turns off and shows the engine light. What's going on. I had to put my car into park, re-ignite the car and go through, again, acceleration tremendously slow. It is a Ford Escape 2001 XLT with a new engine with 80k miles on it.
View 2 Replies
Advertisement
My girlfriend has a 2001 Ford Escape 3L, 6cyl. When accelerating there is a loud high pitch whistle/whirling sound. The sound varies with the amount of throttle you give it. More throttle = louder whine. Doesn't seem to do it when idling or coasting. What that could be? I'm about to remove the belt and take a look at the drive belt tensioner and other pulleys.
Just checked pulleys and tensioner and the tensioner seems fine, a/c pulley spins smooth and free no play, alternator spins smooth no play. The belt needs to be replaced. I wouldn't think this would cause such a load whistle under acceleration. I would expect it to do it all the time if it was the belt. I'm looking at the water pump pulley and belt too and they seem ok as well.
View 12 Replies
My fiance drives a 2006 Escapse XLT v6 AWD. It's really a great car.
She noticed an issue when she filled the fuel tank the last time. It took about 8 miles of driving for the gauge to read full after being filled from empty. She also told me there was a "whirring" noise when shutting off the car and turning it back on. I checked it out and found the fuel gauge is making a noise. Whenever you shut it off or turn it on and the needle moves there is a distinct whirring noise that sounds like dirty plastic gears meshing, which is what I'm assuming is the issue.
I've done a search and came up with 0 results. Can the cluster be disassembled and possibly just clean the gears?
View 5 Replies
I have a 2005 Ford Escape XLT 3.0L V6 which I bought 6 weeks ago. It has 103,000 miles on the clock. I mainly use it for going to school and getting around town etc but on Sunday I had to take my parents back. It's a round trip of 230 miles. Weather was sunny. Traffic on the Expressway so a lot of slowing down, stopping, setting off cycles but no issues. On the way home, about two toll plazas from my exit on the I90, I noticed that the engine sounded and felt like I was driving in a higher gear than that required for the speed I was doing (5 mph). It's an automatic (which I'm not used to as I've always driven manual) so I don't make any gear changes but if I'd been in a manual, it felt like I was in 2nd when I should have been in 1st. Does that make sense?
Anyhow, so I managed not to stall at the toll plazas but when I exited, the engine stalled 3 times (twice at intersections and finally when I pulled up outside my house). There is no problem starting the car after this has happened. I called my local autoshop who said to bring it in Tuesday so I didn't drive it Monday. Tuesday morning, it felt exactly the same when I was slowing down for traffic, intersections, turnings etc. The autoshop had it 3 days and couldn't find anything wrong with it. There is no data stored on the computer to show any of this happened and it has driven fine for them when they've taken it out. Beyond frustrated! I know what I heard and felt. Someone mentioned the overdrive staying on but I don't know what that means.
View 3 Replies
I am having a lot of issues with my 2002 ford escape, a while if I drive the truck acts normal, but after driving it starts missing when beginning to accelerate at a dead stop check engine light starts flashing pulled codes coming up with #4 cylinder misfire and #5 cylinder misfire detected, also a catalyst system below threshold bank 2, I have had the vacuum lines repaired and still no changes and went through and changed my grade of fuel from regular unleaded fuel to premium fuel, actually went worse with using premium fuel. I was thinking of replacing all three coil on the front of the motor, putting new plugs in it and seeing what that does.
View 2 Replies
we have a 07 Escape that the brake lights stay on even with the ignition key off. I changed the brake switch twice. Thinking maybe the first may be faulty from the factory. I'm stuck on what the problem could be
View 8 Replies
Can the speedo and tack lights be dimmed to almost off with the + and - buttons either side of the headlight switch on a 2014 Escape?
View 2 Replies
I am experiencing some strange behavior from my 2008 Ford Escape LTD. At low rpm's, usually when I am going uphill, the engine sounds like a diesel at low throttle and low rpm. It sounds fine at idle, but as soon as I apply light throttle I hear the characteristics rattle of a diesel engine. The engine returns to normal once I get above 30-40 mph or so.
My escape is at 99k miles (bought at 89k) and I'm not sure what maintenance was has bee done on it (sparkplugs, timing belt, etc?). (I do have an OBDII reader)
View 1 Replies
My wife's 2005 Escape Hybrid has recently started acting up. After a bit of driving at semi-highway speeds (say 10 minutes), when you slow down to a stop- the car stalls out (or what feels like a stall to someone who drives a std transmission car). Sometimes, it comes back on when you turn off & on the car- sometimes it takes a minute of being off to turn back on. After a few cycles of this, the engine temperature warning goes off. After each stall, the car will be ok for a few minutes then stall again when slowing down (it seems to do it when you are under 20mph only- not that I am about to try to stall it at high-speeds). It has circa 70k miles on it, and is obviously in the shop- as it is unsafe to drive. It was a warm day when it first did it (say 80deg), and cooler (50) the next morning.
View 4 Replies
I've had this problem for a while. The previous owner of my escape replaced two tires and said the ABS and four wheel drive lights started coming on. ABS solid, FWD light flashes eight times every two minutes USUALLY. Sometimes the ABS and FWD light are off if I am on a short drive. Sometimes in these instances I can feel the brake pedal pulse or I can tell the 4WD is trying to activate without a reason (jerking in the steering wheel).
Sometimes the ABS light stays off while the 4WD light flashes constantly. After doing some research on here I'd like to believe it's a tone ring since that seems to be a common problem and a relatively easy fix (and cheaper than new tires). Oh yeah... sometimes (very rarely) the lights stay off and everything works great. The guy I bought it from said that the lights started activating two weeks or so after he changed the two tires.
View 7 Replies
Recently it rained pretty hard over here and my sunroof leaked pretty badly. Carpets were soaked, upholstery on roof got soggy, and I think some water dripped into the cluster or something maybe. So this is almost all a water damage issue I believe.
Since then, whenever i start my car there will be a series of 5 beeps that repeat 5 times, coming from the cluster. I did some research and it could be because the airbag warning lamp is out (it's light should flash when i turn the car on but it doesn't).
On top of that, the cluster gauges, lights, and radio lights, flicker for the first minute or 2 of driving and appears they flash on/off faster as i apply gas.
Applying gas also seems to interrupt the airbag beeping as the lights flicker. Car seems to run fine as far as I know other than that.
Did some more research on that and all I come across are alternator problems. From what I've read the alternator is hard to reach on 02 Escapes, and it could be very expensive so I'm REALLY hoping that's not the issue.
View 2 Replies
This 2002 ford escape 3.0 xlt 4x4. on the dash you have your transmission #s laid out . the #1 seems to always be highlighted in a square. but as you move the shifter to whatever gear you want there is another square that highlights the selected gear. Also, before when you would have it in D it would flash back and forth from D to 2 just the lights not the transmission.
View 1 Replies
I have a 2011 Escape. When I punch in the entry 5 digit code on the door post, I hear a small "click" and the parking lights come on. The door locks, however, do not operate. When I use the key fob the locks do work. What the problem is?
View 4 Replies
I have a 2001 Escape XLT, when driving thru a parking lot or otherwise at slow speed and hitting bumps, I can hear a clunking sound from the right front tire. Its especially bad if I drive over cobblestone or on a dirt road. Could this be the CV joint? Ball Joint? How can I tell what it is?
View 4 Replies
So heres the story..........'02 Escape, 179K miles, just had the oil changed 2 weeks ago, ever since then I've smelled oil burning when the car starts up and every now and then after exiting the car. Also have had the check engine light on intermittently for the EGR insufficient flow for the past few months. It comes and goes whenever it wants. Today Wifey called me and said something was wrong with the car, I drove it home (about 26 miles). The car runs fine as shifts through the gears, but as soon as it gets a load put on it, it cant pull hard like it used to and it gets a high pitched/squealy whistle similar to a turbo that's spooled up.
Its hard to say where its coming from but from what I can tell I'd say somewhere under the hood near the glove box. (that's the only way I can think of to describe it). There's a big long hill right outside her work that I wasn't sure I was gonna make it up. Car just didn't have any power and couldn't decide what gear to be in as RPMs were too high in a lower gear but wouldn't pull in the higher gear. Car pulls hard off the bottom but falls flat in the midrange. I was thinking maybe clogged cat but what would the whistling sound be?
View 14 Replies
ok this has me stumped I get this buzzing/humming/vibration sound from what seems like around Defroster passenger side but it is not all the time only at higher speeds and it it intermittent . I have removed cabin filter and cleaned filter box and checked for a leaf or something even sealed somewhat the plastic shield that covers the cabin filter. I really don't want to rip dash apart but it is so annoying
View 14 Replies
I have a 2001 Escape, V6 engine and I guess it really does not like it when it's cold outside. Usually the car runs just perfect but when the winter arrives and temps drop into the 20s the truck does not want to run idle right when I first start it. I have tried by stating it without touching the gas pedal. And also by pushing it all the way down and then releasing it. I don't know which method is the right one, but it doesn't seem to make a difference. It takes some time and eventually after about 5 miles of driving it will act normal again. What could I do to fix that?
View 9 Replies
So a little while ago I had my parking brake, ABS, and traction control lights all come on at the same time. There was no change in performance, but they have been on ever since. I looked in to it online and a bunch of people said this was a common problem with damaged tone rings, so I checked them out, but they were fine (as far as I could tell anyway). So I scanned the vehicle using a buddy of mine's Snap On scanner, and it came up with the following code:
B1342 Faulty Control Module
We tried to check the fault code through Mitchell OnDemand but it said that this code was for a faulty Parking Assist Module. I don't have any kind of Parking Assist system on this vehicle however. I looked around a little more and this seems to be a pretty generic code for brake system faults with Fords. Also, if the control module for the ABS is the same one that handles traction control?
View 3 Replies
2003 Escape 2.0L ... I occasionally hear a single "pop" sound when I turn left. It seems to be coming from the area of the right rear wheel. Any obvious candidates for this issue?
View 2 Replies
I went to drive our Escape but when I pressed on the brake to switch it to drive, I heard a clicking sound coming from the center console, the brake pedal went all the way to the floor and there was a high pitched whining sound coming from the engine. I turn the car off and call up ADAC (Germany's road side assistance) and they come and find out part of a hose is missing from the engine and stick something on the end of it and the brakes worked fine. They did recommend I take it in to get it checked out but the mechanic here that speaks English doesn't have access to Ford parts. 2010 Ford Escape XLS 2.5L .....
View 5 Replies
The cruise control has not worked on my 2001 escape since i bought it a few weeks back. i checked the usual culprits and everything is good. i plugged my scanner in and got a control module code.
c1945- park switch indicates park with vehicle moving.
I did do some live data testing and it does infact show park when in gear. the display on the dash shows the proper position.
I am almost certain this is the issue with my cruise. Where this sensor is? Doing a parts lookup isn't showing much.
View 11 Replies
