What is the output wattage of a 2013 Single CD Radio/. I've scoured the Internet and found nothing. I wanted to make some comparisons between the factory radio and some of the aftermarket boxes.
View 1 RepliesI have an aftermarket single disk Cd player in my 2000 ranger. lately going over the smallest bump in the road causes the disk to skip. I can go over big bumps, train tracks etc... with no effects on the disk. Is it possible that the laser that reads the disk can be loose? Is it possible to tighten it? It doesn't affect the radio operation.
View 4 RepliesThe display in the stereo in my crown vic died a while ago. It is the same single disc CD player used in the 99-03 superduty trucks.
View 3 RepliesMy radio won't turn on. I have an ford expedition eddie bowel. Looking for a fuse box diagram. Every body tells me that it could be relays or something from the fuse box is my first time with this kind of cars.
View 1 RepliesI want a nice head unit or double din radio to fit my 01 expedition. What would fit it?
View 3 Replies98 Explorer: the display light for the radio and clock has suddenly gone out.could it be a burnt out bulb? Also, the FM channels work fine but AM has never pulled anything in, could there be a wire off?
View 14 RepliesLooking to upgrade it with an AUX input (from an iPhone), and with an integrated Sirius radio.
I prefer the look of OEM. Can I simply replace the radio with a newer OEM unit that has these features, or is it more complicated than that? If I can replace it with an OEM unit, which one?
My 06 Superduty had a plain jane AM/FM stereo. I got a 6CD MP3 replacement from a pick-a-part. I don't know the vehicle it came from, all I can say is that it was an SUV. The radio didn't look the greatest, but it worked. I went back to the junkyard to see if I could get the plug for the AUX line-in. I found a 2007 Fusion that had it so I grabbed the radio, cut the plug that goes into the back and grabbed that too. The line-in was in the center console so I cut that out too. There were seven wires coming out of the radio plug and four coming out of the line-in jack. I connected the four wires because they were the same color on both ends. One was a black wire that ran to a foil shield that encased part of the harness. I guess the other two go to the CAN bus? I don't know, there is no provision for them in my truck. The fusion radio takes a different antennae plug and the face doesn't work. When I plug in the line-in plug that I wired up, it only works on one channel. When I plug it into the radio from the SUV and hit the AUX button, it says NO AUX. Do I need one of those PIE connectors, or is there a way to make my pigtail work?
View 2 RepliesOur 6CD Radio indicates all the CD Slots are full and there are no CD's in it. It will not "load", just says "CD Error". I purchased another USED radio same exact Model # and it does the same thing. Do I have (2) bad radio's which do the exact same thing? Or is there something else in the vehicle which would make the radio's indicate this? Like rear controls?
View 3 RepliesI have an 08 superduty with navigation radio, will the sync radio from the 09 and 10 trucks fit in mine?
View 3 RepliesI just bought a new JCV radio and i want to replace it with the oem radio in my truck. My truck is a 1996 Ford F250 XLT. I bought the wire harness and one connects to my radio and the other connect to the grey and red wire coming out of my dash, now there is another connector coming out of the dash that is black and i believe it is for the speaker but, i can't find an adapter to fit it . Is there a male or female adapter that i can plug it to it and the splice the other end to the harness that i bought?
View 2 RepliesI recently bought a 2008 F-250 lariat and it came with the single disk am/fm radio, i am wondering, can put the navigation touch screen radio in its place?
View 2 RepliesIs there anyway to make the night mode on these Nav/Sirius radios darker?? In night and auto modes this thing is just too bright.....
View 1 RepliesMy friend left the windows open in my 2003 ford escape while it was raining, and now my radio won't work.. Nothing shows up on the led(I think?) part where the time and radio station are supposed to show.. The only thing that works on the radio is that when you turn the headlamps on, the numbers, buttons, and volume dial light up.. Will the radio need to be replaced? Or is there something I can do to fix it
View 2 RepliesJust installed a new jvc kd-s48 stereo and it cuts out for a half a second every couple seconds. Kind of like a scratched cd but it's with the tuner and mp3. The sound "stumbles" and then it very quickly raises back up. it sort of seems like if I wiggle the wires in the back it'll stop. I will check all connections, I use female and male spade connectors and then shrink wrap over each connection. Could it be a faulty deck?
View 5 RepliesI have a 1999 F-350 crew cab. I have a fusion active bass tube in the back, and my family went to Tahoe, so I took out all the bass tube but the wires had to be left in the truck. I thought I capped the wires but I guess I didn't or the cap came off. Anyways, I was plugging the wires back into the bass tube when I got home and there was a big spark, I think the ground wire and the wire connected to the battery touched. Now the radio does not work at all. I'm guessing I blew a fuse, I don't know how to fix it, or what fuse that would need to be replaced.
View 2 RepliesI have a 2011 F-250 Xlt that came with the standard radio/CD player and I wanted to replace it with a OEM Navigation Unit. I was going to have FORD install it once I can get my hands on one.
My question is:
1) Do I (just) need the head unit, or will I need wiring harness and other accessories? (the truck has sync, had xm radio)
2) Will the steering wheel buttons still function.
3) Is there anything I should know before attempting this
4) Will there be any repercussions.
I have a 2012 F250 XLT. I have the stock 1CD changer. I am considering one of the fancy touch screen radios with nav. Need to know if my wiring would be compatable with this type of radio? If so are there any recommendations out there for a system? I saw one Astrium GEE-2865. I don't know anything about them though.
View 14 RepliesI just purchased a 2008 F-350 and I am trying to get my "line in" plug to connect to my iPhone. When I connect everything my radio says no connection to auxiliary. I am wondering if the plug is bad? And where could I find this plug? Figuring the name out to search is another ???
View 2 RepliesI have an 08 f150. Doing an Alpine iva w203 head unit. The back of the factory radio has two harness plugs, one is bigger than the other. A third plug is the ant. which needs an adapter too....but the root question is...... The bigger of the two is the harness that adapts to plug into the new unit, what is the second OEM smaller plug for that has no spot to plug into the alpine unit? does it just sit there not plugged in now?
Is the second smaller plug for the steering wheel controls? is this where I connect the SWI-JACK adapter that allows the steering wheel controls from the truck to go to the radio? if so, where do i find a harness adapter to plug into this second OEM harness?
2013 F-250. Sync. No navigation. I am able to pair my Android cell phone to the truck and all works fine. Can send and receive calls using the voice commands etc. I am also able to play music from my bluetooth enabled LG V10 android cell phone. When I start the truck, it automatically detects my cell phone, connects to it and begins playing music from my cell phone through the truck stereo. And therein lies the problem.
My question is, is there a way to tell the truck to go ahead and connect to the cell phone, but don't start playing music. In other words, I don't want the truck to launch the music player on my cell phone. I always have to either turn off the player on my cell phone or give the "pause" command through bluetooth audio.