Ford Aerostar :: Shift Lever Broken?
Nov 4, 2012
Ok, my shift lever is broken where the OD button is located. Not the cap and button, the whole end of the lever has snapped off.
View 5 Replies
Nov 4, 2012
Advertisement
Ford Aerostar :: 1991 - Shift Cable Popped Off Gear Select Lever
I have a 1991 Aerostar 2wd 3.0. I recently had freeze plugs replaced and the mechanic had to drop the tranny to get to some. Now the shift cable has come off the gear selector lever. I have googled everywhere and can't locate the procedure for reattaching it. My mechanic was doing the work on the side and charged me only labor for his assistant. He is at work right now..
View 5 RepliesFord - Explorer :: Front Seat Recliner Lever Broken?
The steel lever that you use to recline the driver seat broke on my explorer the other day. Luckily the seat is stuck in a pretty comfortable position - for me at least. The lever broke right at the pin that holds it to the seat.
View 6 RepliesFord F-150 - 1997-2003 :: Throttle Body Control Lever Broken
I accidentally broke the control lever where the cruize control attaches. I've looked all over but I can't find the lever. Where I could buy just the lever? New throttle body is more than I want to spend.
View 1 RepliesCamry 2012+ :: Trunk Release Lever Broken
Have this problem? 500 miles out of warranty and my trunk release lever is broken. The button on the remote still works, but the lever on the floor has no tension on it. It feels like the cable either broke or is no longer attached to the lever.
View 12 RepliesFord Aerostar :: 1997 - Cruise Control Cable Broken
When I had my heads replaced, the mechanic informed me that my cruise control cable was broken. News to me. It worked fine before. He said he couldn't find a replacement. I went to my local Ford parts dept. and they told me it was a discontinued item.
So I went online and ordered one from Direct Ford Parts and it did not match. The part number was FMC-F49Z9A825JA. In the parts catalog it says it fits 92-97. Not even close. The one I have has a screw off top and the one sent has a bolt on housing.
1997 Ford Aerostar 4.0 ... I really need my cruise control ...
Ford Aerostar :: Heat Does Not Work - Missing Or Broken Thermostat Cause This?
I have yet another issue with my lovable Aerostar. This one I just noticed today. The heat doesnt work! Not that its very needed here in Florida, but its still an issue. I tried the heat function out multiple times today and even after driving for a good 20 minutes hot air does NOT come out! Only cool air comes out the vents. Well actually, for a few seconds when I turned the heat on it sort of felt "slightly warmish" but a few seconds later it was cool again. I don't know if this could be related but the temperature gauge is stuck at C (Cold) as its been since I purchased the van about a week ago.
I brought the van to my friend who's a mechanic and he looked under the hood and claims there is no thermostat, the previous owner must have removed it. I found this odd since the vehicle has yet to overheat and I know overheating is sure to happen when the thermostat is missing. Need to confirm if these signs are indeed because of either a broken or missing thermostat? If it is, I have yet another problem. I began looking on eBay for a new thermostat and there's all different kinds! Some say "190 degree" some say "180 degree" and some say other things. Here's a link to a "190 degree":
MOTORCRAFT RT-1152 Thermostat
If I do need a new thermostat, what kind do I need? Here's the exact van I have: 1989 Ford Aerostar XLT V6 with 4 speed auto transmission. Oh and just in case this has anything to do with it, the van has A/C but it's not currently working.
Ford Aerostar :: Rubber On Metal Like A Flat Tire - CV Axle Broken
Have a 95 aero E4wd. Have replace driver side cv axle and drove about 8 miles then the outer joint broke. Had mech change cv axle and drove about 2 miles and the inside broke.. Same mech replace it and drove 3 mile and heard like rubber on metal like a flat tire. The cv axle did not break and won't turn when in gear. Back to shop with aero. Lifted on lift and jacked up front and rear. Turned the driver side and the passenger turned with it also it turned easy. Started it up and placed in gear, all were rotation except driver side , it was hung up. What should be fixed on diff?
View 14 RepliesFord Excursion :: Hard To Shift - Transmission Lever Coming Out
As it turns out, my shift cable wasn't bad. The transmission lever coming out of the transmission doesn't want to move very easily. When in gear, it shifts fine as it should, so I'm thinking something is bad with the lever. Problem is, I don't know what could possibly be causing it.
View 8 RepliesFord F-150 - 1997-2003 :: Overdrive Button Blinking On Shift Lever
So I drive a 19 97 F150 v8 5.4 4x4 and while on the freeway I noticed that my overdrive button was blinking on the shift lever. The truck wasn't driving any different than usual, so Im just trying to figure out what this means.
View 1 RepliesFord Transmission :: Shift Lever Will Only Click Back Two Times And Then Goes All The Way Forward
72 Ford F250 with big block 460. after three years my truck is ready to run as soon as i get my new fuel pump in today. was hooking up shift linkage and noticed the shift lever will only click back two times and then goes all the way forward. I put a shift kit in the c6 and it was beautiful condition inside cant figure out why it would only shift to two places.
View 2 RepliesFord F-150 - 1997-2003 :: 2001 - Replacing Gear Shift Lever?
I just bought a f150 2001 5.4L crew cab. It has the O/D switch in the gear shift lever and the black plastic handle is broke. I found a complete replacement lever on ebay but cannot find any tutorials on how to replace this.
View 8 RepliesFord F-150 - 1997-2003 :: Fuse Blown When Shift The Gear Lever To Below D
1997 F150 xlt 4x4 ... When I shift the gear shift lever to below D (2-1) it blows a fuse and I lose instruments. Replacing the fuse is not difficult, just tiresome..
View 6 RepliesFord Ranger / B-Series :: Shift Lever Sloppy / Truck Won't Start
I have a 96 ranger 4.0L shift lever was very sloppy and one of the torq bolt fell on the floor I used loc tite and tightened them up with no problem put everything back together and now it wont start. I think I checked everything even replaced the neutral safety switch, adjusted the tranny cable, checked fuses and switched around the relays maybe an ignition switch? I am running out of stuff to troubleshoot.
View 13 RepliesFord Excursion :: Transmission Shift Lever Indicator Not Being In Proper Position
I recently bought my first EX and I finally had enough of looking at this
The transmission shift lever indicator not being in the proper position needed to be fixed!
After some searching, I realized what the issue was and was quite surprised that the "fix" is replacing the entire shift lever indicator assembly. Seems overkill but right on par of with the way the world works nowadays.
The other solution I found was by a company called Dorman. They make a Shift Indicator Cable Bracket, which is the only part that was damaged in my case as you can see here. The white part pointed at by the arrow is supposed to be attached to the rest of the white plastic.
I looked around the garage thinking I need some glue. And something to reinforce the freshly glued parts. That should have been much more difficult as I don't regularly fix tiny plastic parts BUT I quickly came across this old external hard drive cover.
Broke some tabs off, trimmed them to size and poured glue all over the place.
This is what I ended up with.
Now my OCD can focus on something else
Ford F-150 - 1997-2003 :: 2002 - 4x4 Does Not Engage When Shift The Lever On The Floor
4x4 wont work, when I shift the lever on the floor it doesn't engage so i bought two new solenoids.. didn't work, have power on both solenoid connections. If I unhook my vacuum lines from the solenoid, I can push the Actuator rod in making my 4x4 work. I've gone threw everything.. have vacuum, have power on my solenoids. Just nothing works when I shift into 4x4 on the floor.
View 3 RepliesFord 6.0L Power Stroke Diesel :: Shift Lever Sticks In Park
A few months ago I couldn't get the shift lever out of park without trying multiple times. Then it was okay for about 5 months now it is back and worse. It is not bound up because of parking on a hill or anything like that and I press very hard on the brake pedal. It take s multiple times to get it out of park trying turning the key on and off and so on. The truck only has 86,000 miles on it and the transmission has always worked perfectly.
View 6 RepliesFord Super Duty (1999-2016) :: Automatic Shift Lever Replacement?
2006 350 here. I was wondering if it would be possible to replace my Automatic tranny shift lever with one from a newer truck (08+). If possible, what exactly would need to be replaced?
View 1 RepliesFord Super Duty (1999-2016) :: Slop In Shift Lever On The Column
I have a 2003 super duty crew cab 4x4 with V-10 auto w/167k. Awsome truck. I recently have noticed alot of slop in the shift lever on the column. Everything is tight on the tranny end. It appears to be under the dash. Is there a part that may be replacible? And if so... is it fairly simple to repair?
View 14 RepliesFord Ranger / B-Series :: 1998 Automatic - Shift Lever Stuck Sometimes In Park
It's a few times in the past 2 weeks, the shift lever won't come out of PARK easily. Sometimes I have to wiggle the shifter for quite awhile before I can get the shifter to shift out of PARK. It also doesn't start when that happens, like everything works but it doesn't start. It's like it's locked. It finally lets go and I can start it and put it in Drive and Reverse and go on my way. But there's not set thing that I can do to make it work.
It's just luckily let me go the few times it's happened. We replaced the shift cable about 1.5-2 years ago and of course the cable is out of warranty. But even if it's the cable, it's definitely going into park because you can hear the click when you stop the truck and turn it off, and throw it into PARK. But when the shift get's stuck it won't crank or make any kind of cranking noise, it's like the battery is dead but it isn't. When it happens you can't even shift it out of PARK to try and start it in D or R.
So I was thinking something could be going on with the NSS. Is there any kind of brake pedal interlock switch on a 98 Ranger? I notice when I start it and press the brake pedal it clicks loud under the dash, which I don't remember hearing always. But maybe it always makes that click when you hit the pedal because I usually always have the radio on. What I can do if the shift gets stuck when I go to leave work? What do I need to look at to determine the problem?
Passat (B7) :: 2013 - Seat Won't Return To Normal Sitting Position / Laid Out Almost Flat - Lever Broken
I am having a problem with my rental passat, its a 2013 with 860miles and the seat lever that makes the seat recline broke and now the seat wont return to normal sitting position, its laid out almost flat. How to fix this? I am guessing there is a wire in there somewhere that will release it ...
View 1 Replies