My 1997 4.0 Rear Wheel Drive is making a clicking noise when it is put into gear or when it switches from drive to reverse and vice versa. Sound is coming from the back of van. Does not make noise all the time. Drove 50 miles last night with no problems and minimal clicking. Could it be U-Joints going bad? Or is this a different problem?
View 6 RepliesI just came back from a long trip and during the 400 miles drive I started to hear noise coming from my differential - kind of like a constant high gear loud noise. I will hear this noise when I start to accelerate and it will only gets louder and louder as I go faster and faster. I had a pinion seal leaked fixed last week and I checked the fluid and it is full.
View 9 RepliesFor starters I have a 1999 F-250 5.4l changed all 4 ball joints about 15,000 miles ago. I have been hearing a grinding noise coming from the front end for the last month only when I turn left and at slow speeds. I was servicing the TC so I threw it in 4 wheel to check it and it wouldn't engage until I started moving. When it did engage it was a bad grinding/ clunking sound coming from maybe the differential.
View 14 Replies97 3.0 2WD, Where is the differential vent or does it even have one? I've got a rear axle seal leaking.
View 5 Replies2002 f150 fx4 ... I changed both front cv shafts cause they were making noise and the u joints and I still have a clicking noise in reverse if I turn my wheel at all to the right ...
View 1 RepliesI brought my 4runner in to fix a rear axle seal and to see if they could isolate a clunking noise I've been having. They said the clunking was coming from the rear differential (I believe him as that's what I heard, while driving or even just putting it into gear). They have yet to call me back, but any guesses here as to whether it is a bearing (my guess, as it is most pronounced on a bumpy road) or a cracked gear or something else. I've been driving with a clunk for about a week, but have various clunk problems for the last 80k miles ....
View 14 RepliesI have 98 ford explorer sport 4x4 does has a clicking noise coming from the front driveshaft that connects the transfer case to the front differential. At first we thought it was the front drivers side cv joint which we replaced. nothing changed. there is still a noise apparently coming from the front driveshaft. we can not tell if it is the front differential or the transfer case itself. The noise is being transfer through the front driveshaft. It sounds a bearing is going bad.
View 1 RepliesI have a 2002 f150 4.6L triton. I've been having problems with it making a clicking noise. It only does it when its in gear. I put it in park or natural I hear nothing. But as soon as I put it in drive or reverse and put a little pressure on throttle it starts to tick pretty loudly.
View 4 Replies2003 F150 SuperCrew 9.75". Today we got to tearing into my rear end on my truck. I was having a clicking noise from the rear end when slowing down from about 20mph. It was a constant click, click, click, click. It was driving me nuts. Well when I first tore the cover off to change the wheel bearings I found some metal pieces in the bottom of the rear end housing.
I did some researching and came to the conclusion it was the shims behind the side gears or the clutch packs. Well it turned out to be the clutch packs were totally shot!! The side gears and the spider gears were loose and kinda just flopping around!! I ended up changing the side gears and spiders gears, bought them as a kit through ford and then the clutch packs.
The job overall wasn't to hard at all. The hardest part was getting the spider gears spun into the carrier. Ford has a "special tool" that that compresses the clutches and another to hold the carrier through the splines in the gears so you can spin the carrier itself to spin the spider gears in. We ended up using the axel shaft itself and clamping it into a vise and setting the carrier on it to hold it from being able to spin.
We then took a piece of all thread and put it through the side gears and put washers on each of the side gears and nuts in-between them and then spinning the nuts up and down to compress the clutches. Basically what Fords "special tool" does. Then just spun the carrier with the pin that goes through the two spider gears and that was about it. Once we got that done it was all basically putting it all back together.
I have a 99 F150 4x4 4.6L automatic trans. The truck has 260,000 miles on it. Saturday, while going down the interstate, this chirping noise started up from the rear. When I got home I jacked the rear up and spun the wheels while listening. There is a chirping noise that, as best as I can tell is coming from around the front of the driveshaft around the u-joint area. I've never known of a u-joint to make this type of noise before. There is no vibration or anything, just the noise. The frequency of the noise increases and decreases as I speed up and slow down. I don't think it's coming from the transmission, but it's hard to tell, as everything echoes. I couldn't imaging the driveshaft itself making this noise, but I guess it's possible.
View 12 RepliesI was at the bank today and when I put it in reverse to back out, the car jolted and then it rolled forward slightly while at the same time sounding like there was grinding. I immediately put it back into park and the noise stopped. Then I tried to reverse again and it started making a clicking and whining noise and wouldn't back up. It sounded like it went into gear but it won't move. I was able to get it pushed out and the drive still worked. So I was going down the road and got up to speed and the shifting was significantly delayed.
It's an automatic by the way. So I tried to take it on the highway and it won't shift out of 2nd gear or 3rd. I know for a fact that overdrive isn't working so i'm doing 50mph down the road and hitting 2500 RPM. I don't know what the deal is but for about 8 months there has been a rumbling vibration when it tries to go into overdrive and when I accelerate quickly I force it to downshift and the rumbling goes away but it still shifted into overdrive when it got passed the rumbling and vibration. It's a 1997 C1500 2WD 5.7L Silverado.
I suspect my rear driveshaft is causing the vibration/noise I thought was coming from the front. I posted a few days ago about how I suspected it was my front wheel bearings making noise. Now its vibrating real bad and feels like a universal joint.
Can I pull the rear driveshaft out and drive off the front wheels with the switch in the 4x4 position? Last year my wife drove for a few days with no front driveshaft as I had one on order. It worked fine, for that.
I just want to go for a test drive to make sure that its the rear shaft, and not something else.
I have a 2009 f150 platinum and have been told both sides of the story now... that the front differential is sealed and need not be changed, and also that it is unsealed and can be changed. While asking this question I might as well lump in the rear differential as well. Are they both sealed or unsealed and need to be changed???
View 3 RepliesMy MK4 Jetta started leaking coolant recently and I'm not sure where it would be coming from. I already checked the reservoir to see if it was leaking out of there but I could not find any leakage. I've found some coolant on the right side driveshaft near the differential, there is also some on the diff. I'm wondering if this could of happened because it has been sitting on a jack stand not being driven for about 2 months. Is it possible that within that time 1 or more of the coolant hoses could have cracked or anything. And while I'm on the subject of why it's on a jack stand, it also has gone through wheel bearings twice within the last 6 months to a year. Is this normal?
View 8 RepliesLast week I broke the pinion and spider gears in in rear end. Well Im getting a used rear end rather than rebuidling mine. What is the gear ratio on the 97 F150 xlt 4.6l 4x4. I figured they would all be the same but my tag is missing on my diff and I was told by an auto parts store that there were a couple different ones.
View 14 RepliesMy rear-end differential came apart and is not repairable. I have a 1997 F150, 2WD, 4.6L engine, 5 lug wheels. Which years have the same rear ends so I can scour the junk yards for a replacement?
View 4 RepliesAny likely culprits? 2002 F150 (with Triton V8 if that makes a difference).
View 4 RepliesI change my 3.23 gears on my limited slip differential to 3.90s everything was installed back to how it was oil was added at the end...however when i went to test drive it, it was whining and on reverse it would be popping..
View 19 RepliesI need to replace the gear oil in the rear differential on my Ford F -350 and was wondering what the best sealer to use.
View 7 RepliesWell i picked up a 96 4x4 with the 4.0 a few weeks ago and been fixing stuff weekly that i find wrong. One thing i noticed was the rear diff was leaky but couldn't get the fill plug out so left if for now. Last night my wife was on interstate and it just started making a loud noise so she pulls over calls me. I get there and drive it and it makes a woowoowoo noise and it got louder as speed increased. She was 3 miles from the exit so i drove it about 15-20 to get it off interstate than another 2 miles to her sisters. We let it sit for a few hours and found a flatbed to haul it home, and when we finally got home i drove it off the flat bed and now it was making a loud clunky noise. Parked it in drive till today. Cracked open the rear and no fluid came out.
Inspecting all the gears looked good no metal in bottom so i went and got a new rear cover and 3 qt. of fluid. Put it back together and the woowoowoo was still there but seemed to slowly go away as i drove it around the block. So what else could be going on here or do i need to drive it and warm up the fluid so it circulates? I also noticed a sheeee sound like metal on metal when braking but i changed all 4 rotors and both pads last week but i noticed the brakes in the rear that look like drum brakes was bare but i assume that is only for the ebrake so didn't bother changing them yet. Could those be hitting the inside of the rotor and making the metal to metal noise?
my '97 subaru impreza outback sport has a rhythmic wosh wosh sound from the right rear wheel when the brakes are applied. It has rear drum brakes. I put on new drums, shoes and springs and the sound is still there. When braking hard, there is a metal knocking sound as well. What this could be?
View 2 Replies