2001 F250- V10... Lower radiator hose has coolant leaking - Right now I cannot tell if its the hose or the radiator itself (hoping not) - I tried to take the clamp off and it broke - Any tricks to removing the hose? its on there pretty tight.... I guess if I don't want to save the hose I can rip it off with a pair of pliers but before I do that wasn't sure.
View 2 RepliesI'm trying to troubleshoot a leak on my 08' F250 with a 6.4 powerstroke. It's been dripping coolant when cold pretty aggressively. Once the truck heats up, the coolant leak seems to mostly go away.
Here's a picture of the drip, it's marked by a dart, so you can see the location from the top (second pic). The radiator house connection around the engine seems dry.
Pic from Top ....
What's hidden here that could be causing the leak?
I have 98 passat V6 and the lover radiator hose is leaking at the connector between radiator and the hose. Do I need to change the whole hose or is there maybe an o-ring that should be changed? How hard is to remove the hose? Do I have to go to the dealer?
View 2 RepliesJust had to replace radiator at 38k on my 2012 SD. Now I have another leak at 41k. Looks like it's wherever the lower radiator hose leads. Kind of a weird junction. I don't think it's coming from above there, but not sure. It's the primary dgas bottle that was low. The radiator was covered under my ESP. We'll have to see what's up with this one. Been eying a denim blue SD at dealer, thinking this is going to talk me out of it though. Not especially happy right now.
View 3 RepliesI own a Honda Crv 2000. I took the car for an oil change at a local oil change shop. They overfilled the oil. I went to the city and came back, and next day the underside of the car was oily and leaky. The car was dripping oil. I immediately siphoned out 300ml of extra oil from the car. After that the leaking stopped and it does not leak/drip anymore. At the same time I saw coolant dripping from the lower radiator hose (where it meets the radiator). I noticed when the fans come on it start dripping. But as of today the coolant dripping has stopped. I am thinking of changing the hose.
View 6 RepliesI'm about to tear into a friends 2002 B2300 4 cyl. The lower hose that comes off of the coolant reservoir is leaking in the metal part of the line. Close to where it bolts to the block. At a glance, it looks like I have to pull the whole top of the motor apart to get it off since the line runs around behind the motor. Is there a trick to removing this coolant line without a lot of teardown? I'm not finding it at parts stores so I guess it's a stealership part.
View 2 RepliesI have been encountering issues with my heater not providing hot air when the engine is idling. My Elantra has around 121K miles on it. I have not replaced the thermostat, water pump, timing belt, radiator, radiator hoses, or done any coolant flushes.
I checked the overflow reservoir and radiator. I didn't see coolant at top of the radiator so I topped it off as well as the reservoir. It seemed to have fixed the issue for now but I had this similar issue about 5-6 months back. I also topped off the coolant and things have been fine until now.
I checked the hoses and squeezed them to see if I could see any notable leaks but didn't see anything. I checked the overflow reservoir tank and line and nothing seemed out of the ordinary. I also checked the top of radiator to visually inspect for any notable cracks but didn't find anything. Also to note, the coolant inside the overflow bottle was bright green and not discolored.
I did however notice a lot of white chalky residue on the bypass hose below the upper radiator hose and the engine block. My guess is that my upper radiator hose is slowly leaking? Leaking in the thermostat assembly? And I also noticed a tiny puddle of coolant below the lower radiator hose at the engine block. See the pics below.
My wifes 2002 gls has a coolant leak from the top radiator hose. I put a new hose on and two new clamps on the leaking end and it still leaks!! I have never seen anything like this and I am not sure how to stop it.
View 3 RepliesIs it difficult to replace the lower radiator hose on a 5.4L? I'm mainly thinking about access to the connection at the water pump.
View 13 RepliesI did all the flushing, cap, thermostat, 50/50 antifreeze, etc, fixes but when I floor it going up an on ramp on an 85 degree day it will go into limp mode / fail safe mode. Bottom hose?
View 9 RepliesI'm going to be replacing my lower radiator hose so figured might as well switch over to the extended life stuff going to probably go with the Delo ELC.. Supposedly it's good for 750k.
View 14 RepliesHaving problem with the lower radiator hose rubbing on the serpentine belt...
View 1 RepliesI picked up a used 99 Passat with 79000 miles. I just changed the oil and found the pan pretty well sludged up - typical from what I read on the forum. I noticed the coolant looked pretty diluted - so I drained and filled with 50/50 mix. After starting I felt for the upper and lower hoses heating up and the lower one never did. I guess I should have tested this out before draining and refilling - also typical. Question is - is this a thermostat issue? My Haynes manual says if the top hose becomes hot the thermostat is operational. Heater has plenty of heat, temp gauge stays pegged at 190 degrees top dead center of the gauge.
View 5 RepliesAfter chasing the smell of coolant for a couple weeks, discovered that the upper radiator hose was leaking at the engine. Based on my schedule and drive schedule, and unfamiliar location this last week, I took my truck to the last people I wanted to - the Ford dealer, where they attempted to charge for the hose replacement. During this time I discovered the nature of how these hoses work and asked the tech why they don't just replace the O-rings ... "Ford Motor Company wants to sell you a new hose with labor" - a direct quote from the Ford tech. And that is why Ford is the LAST place I want to go for repairs I cannot perform. I kept the old hose - any spot where you can get the O-rings alone?
View 5 RepliesThis is strange, Had the truck for about 3000mi bought it at 147k now has 150... Any way it runs great but the radiator started leaking from the seam close to where the bottom hose is. I have since changed the radiator about a week ago 500mi a week work truck.
Now it seems to be leaking from the very same area, what I mean is the area around the hose is dry but just up the seam a bit it barely leaks, and mainly after the truck cools off at night. These radiators seem extremely low quality, is there a substitute higher quality.
Also of note mine is the 1" core, I was told there are others but they will not fit, I must agree it seems nothing else would fit due to space constraints. These radiators just kinda sit in a cradle and aren't really under any stress that I can tell so it doesn't seem as though that would be the cause.
Also of note the shop where I bought the new one took it out of the sealed box and tank pressure tested it as they do for all new sales, no leaks, I have not pulled it back out yet cause I would like to get some thing less flimsy if it exists.
OK so my 2001 F250 was leaking power steering fluid from the lower portion of the gearbox (where the pitman arm attaches).
I found a thread on this forum where it showed how you could change the seals out WITHOUT taking the gearbox out.
So I got the pitman arm off with a heavy duty puller. Then I scraped out the 1st rubber seal hoping to reveal a snap ring behind it. Well, the seal is 99% scraped off, but there is not evidence of a snap ring. It does seem like there is some metallic ring holding another rubber seal in behind it. But again, I can't find the little open spots that you put your snap ring pliers in to get snap rings out.
How do I get this metallic thingy out???? I already broke a small drill bit trying to drill it out. It just doesn't seem like the best way to go about it.
2004 4.6 V8 Trition ,two wheel drive, STX Pickup. By removing the bottom radiator hose, will that allow all engine coolant to be drained from engine? If not, about how much coolant will remain in the engine in terms of quarts or percentage of total vehicle coolant capacity?
View 1 RepliesRecently I had a radiator hose split while traveling. The EOT got up to 250 degrees before I could pull over and stop the truck. I flushed the cooling system with water, replaced the thermostat, and added Ford Gold coolant as per the recommendations in the Tech folder. My oil temps are higher now than prior to this incident. Unloaded on a flat road my deltas are about 10 to 12 degrees @ 60 mph.
My water temp will stay around 190 to 195 degrees while my EOT have reached 212-215. I pulled a small utility trailer and saw a delta of 17 degrees this was at about 75 mph. Typically unloaded I would only see a delta of about 8 degrees and this was at 80mph. My question is do you think a EOT of 250 would burn the oil, I had Shell Rotella T5 5W40 in the engine. Would it be possible that the oil cooler is partially plugged from this temp?
I have a 2002 V6 Passat Wagon. I am hemorrhaging coolant out of my lower coolant pipe. I can reach it put my finger in a feel the coolant coming out as fast as I pour it in. I can't see any way to get at the pipe from the top and I can't see the hose that should be attached there from the top. I assume this means the front end will need to be jacked up and go at it from the bottom. Also note the intake and return from the heater in my car is mexi fixed and looped together (no heat).
View 2 RepliesThe inter cooler to throttle body hose and it seems to have coolant all over it.
View 12 RepliesI have a 1999 jeep cherokee 4x4 four liter inline 6. have a coolant drip at bottom radiator hose, change hose. but still drip. Could water pump be leaking. and it running down on the bottom radiator hose.
View 4 Replies