Ford 7.3L Power Stroke (1999-2003) :: High Beams Only And No Low Beams After Installing New Headlight Bulbs


Jun 3, 2015

I have checked fuse 46 and 47, and installed new headlight bulbs. I have high beams, but no low beams. I have searched this topic but no one has the same prob it seems. My headlight switch has broken. Could it be the headlight switch?

In my manual, it says the 2002 has a fuse panel behind the glove box. I took glove box out but it doesn't look like a fuse panel.

View 5 Replies

Advertisement

Camry :: Headlight Bulbs - 8000K In Low Beams And 3000K In Hi Beams

I want to replace my headlight bulbs; I want to install 8000K in my low beams, and maybe 3000K in my hi beams. But all of the bulbs that I ever installed either; A the burnt out within few weeks (lost color), or B they stopped working.

Now, regular WHITE bulbs seem to work forever; but the color ones, burn out/break. Low quality?? I need a pair of very good 9006 8000K, and 9005 3000K. Again, but I don't want to change them in a week or two. I want them to last!!

P.S. 2005 Toyota Camry

View 7 Replies

Ford 7.3L Power Stroke (1999-2003) :: 2000 - High Beams Won't Stay On

First time driving my 'new' 2000 7.3 Ex and the high beams won't stay on for more than a minute or two. Playing with the switch in the driveway, they came on after a minute of not being run, but after throwing the switch a few more times, they wouldn't come on again. The indicator light corresponds with the high beam function. I'm thinking a relay is going bad? The switch is brand new and the bulbs are definitely working. Also, I did not get an owners manual with the truck, and the fuse diagram I found online did not match the box at my left knee.

View 11 Replies

Ford F-150 - 1997-2003 :: Low Beams Don't Work But High Beams Do

I recently installed new halo HID headlights in my 2003 f150 with HID bulbs and ballast the passenger side worked and the drivers side didn't nth lights wired exactly the same. I switched everything from the passenger to the drivers side still nothing I switched everything back to passenger side and they don't work now. I tired regular bulbs in the passenger side an it worked then on the drivers side and it worked for a split second and went out and then I retried t on the passenger side and it worked for a split second and went out a now neither are working. I checked all the fuses and their good. What the problem could be?

View 5 Replies

Ford Super Duty (1999-2016) :: Truck Only Has Low Beams / No High Beams

My truck only has low beams. When you move the stalk on the colum backwords it changes nothing, when you move it forwards the low beams go out but the high beams do not come on.

View 14 Replies

Cavalier :: 2003 - High Beams Not Working / Bulbs Are Good

My High beams for a 2003 cavalier are not working. I checked the bulbs and they are good, The Low Beams Work and my drls work. I switch from low to high and the blue indicator on the cluster panel comes on.

View 5 Replies

Prius (Gen 3) :: Name And Purpose Of Bulbs Right Above High Beams?

I don't know the official name, but it's right above the high beams, it stays lit if you just have your side lights on too. BTW, what's the purpose of it since we really don't have DRL's?

Modifying it with a different bulb, if so what's the size? Same ones as the interior map lights?

View 8 Replies

Ford Wiring/Electrical :: HID Low Beams But No High Beams

It ford related but I just bought a used car that has hid low beams and when you turn on high beams there is no light at all. The blue light on dash comes on and head lights go off. I just got this car 2 days ago and haven't really looked into it.

View 5 Replies

Camry :: 9011 HIR Bulbs For High And Low Beams On 2010?

So it looks like I need 9011 HIRs for my 9005 high beams, but which HIR do I use for the 11F low beams? same?

View 14 Replies

Touareg :: 2004 V6 - How To Change Headlamp Bulbs (High And Low Beams)

I know the instructions are somewhere, but I am having trouble figuring out how to change the headlamp bulbs (high & low beams) on the easy side-driver side. Do I need to loosen the headlamp assembly or can I just go into the headlamp assembly without removing it?

View 3 Replies

Lexus LS 2007+ :: High Beams Aiming Up In Trees After Replaced Bulbs

Prior to me switching out the high beam bulbs, they were both aiming correctly. After I switched out the bulbs, both high beams are aiming up in trees literally. They arent even close to lighting up the street/pavement. I was wondering if I may have installed them somewhat cockeyed but I thought it was odd that I would have done both of them the same since they are both equally up in trees/same overall height.

View 2 Replies

Prius (Gen 3) :: 2010 - Only High Beams Works / Low Beams Out

I have a 2010 prius the basic model I turned the lights and both headlights went out they only worked on high beams.

I changed the bulbs no luck they still only work on high beams checked fuses they looked good is there anything else I can check?

View 2 Replies

Golf IV / Jetta IV :: Low Beams Went Out / High Beams Functional

After spending weeks ordering parts and doing research on this issue all my attempts have not solved the issue. To reiterate the issue, the high beams work, and the low beams do not. Thus far I have attempted the following without the desired result-

1. Changed the headlights out just in case both bulbs burnt at once.

2. Changed the blinker stalk in hopes of a faulty switch.

3. Changed the headlight switch to a brand new OEM Euro style switch.

4. Checked all fuses (did this first actually).

View 6 Replies

Accent RB (2012+) :: Low Beams Stay On With High Beams

The other night on my way home, I flipped on the high beams and the low beams didn't shut off. Flash to pass still works, and pushing in on the end of the stem turns the low beams off as well.

Having the column switch apart, is it possible this could be fixed without having to pull the steering wheel? Or, am I better off just spending the hundred dollars of so and putting in a new part?

View 13 Replies

Ford 6.7L Power Stroke Diesel :: Wiring Some Light To Activate High Beams?

Just wiring up some light on the front and want to activate the relay off my high beams.. Where the best place to hook into... I'm running it off number 1 upfitter switch. But also want it connected to the high beam switch as well.

View 12 Replies

Caravan/Voyager :: 2007 Dodge - Passenger Side Headlight Does Not Work On High Or Low Beams

My 2007 Dodge Caravan has only one working headlight, the passenger side does not work on high or low beams.

At this time I'm wondering if the problem is in the headlight plug itself, because there are no other complications other than the passenger side not working.

The light did work at first on high beams but now not at all. replacing bulbs makes no difference. There is some brown discoloring on the white strip on the plug face, nothing like this on the driver side.

Also hoping that the problem is not the relay or front control module.

View 3 Replies

Ford F-150 - 1997-2003 :: 1998 V6 - High Beams And Coolant Gauge Not Working

I just bought a 98 F150 V6 Manual transmission 2wd truck. Its a clean truck and I'm liking it so far but its got a couple minor issues. Whats the point of buying a truck if you don't get to work on it??

The High Beams don't work at all. Low beams are fine. I've put new bulbs in, and fuse 16 in the passenger compartment has continuity. I'm suspecting the multiple function switch, because when I pull out to engage the high beams, nothing happens. The indicator on the dash doesn't come on, and the low beams don't turn off either.

The second issue is the coolant gauge doesn't read. When I turn the key to the on position, the needle on the gauge moves up just a bit, but it never moves after that. Anything to check?

There are a couple other minor things like the e-brake light on the dash doesn't always turn on, but I can deal with that.

View 4 Replies

Ford Super Duty (1999-2016) :: High And Low Beams At Same Time And Fog Lights

A good while back I seen a thread to do this , but can't locate it now. I have a 2012 F250 and looking to make my night time driving better ....... I want to run both low and high beams at the same time and getting the fog lamps to stay on when going from low to high beam.

View 14 Replies

Ford - Explorer :: 1999 XLT - Fog / Driving Lights Shut Off When Turn High Beams On

I have a '99 Explorer XLT and when I turn the high beams on, the fog/driving lights shut off. Is this normal? Is there a way I can keep the fogs on while the highs are on?

View 1 Replies

Ford - Explorer :: 1997 - High Beams Don't Work - No Power On Wire At The Bulb Socket

I have a 1997 Explorer XLT. The high beam have not worked since I got it and now living in Virginia they are needed to pass inspection. When turned on (pushed forward) lights go out, high beam indicator comes on. When flash to pass (pulled back) lows stay on and indicator comes on. It does not have auto lamps.

What I have done:
Replaced MFS
Verified power from GRY/ORG wire on MFS when turning high beams on.
Verified power across fuse #33 when switch turned on.
Had bulbs tested, Good.
No power on high beam wire at the bulb socket.

The only thing I have not checked is what several people have referred to as a "splice" I think someone referred to it as S111? Where this is physically located or am I going to have to start the chore of tracing the wires?

View 11 Replies

Ford Super Duty (1999-2016) :: 2006 F250 - High Beams Will Not Shut Off

I have a 2006 F-250 Super Duty (6 liter diesel). The high beams stay on unless I pull the fuse (fuse 30). It doesn't matter what position the headlight switch is in. It is like the high beam flash on the multi-function switch is stuck. It feels fine, but high beams stay on regardless of position, even with the truck off. The low beams (if in low beam when the truck is shut off) do go out as do the running lights after 15 or so seconds (normal) it's just the high beams. Also the high beam indicator light is on all the time (until I pull the fuse) and the fog lights will not come on until I pull the fuse. Should I replace the multifunction switch or look elsewhere?

View 10 Replies





Copyrights 2005-15 www.bigresource.org, All rights reserved