on my 2002 lariat.. Crew Cab dually. 7.3.. it will go into programming mode after 8 cycles.. Door locks actuate, but fob wont program. I checked the fobs and they are sending signals. What could be problem?
View 8 RepliesI have an '02 X. I have re-programmed the seat belt alarm setting per the owners manual and set the "lights on after ignition off" to suit my needs.
The one thing that is driving me nuts though is that when I turn the ignition off and get out only the driver's door is unlocked. I want ALL locks to unlock. I haven't seen anything in the manual about this. How to re-program the locks so that they all unlock when the ignition is switched off?
I've put put about 2000 miles on the X now, towing my 5000lb trailer, mild offroading and running around town. It sure puts a smile on my face!
The power locks started locking themselves randomly while I'm driving. First, the CARGO DOOR AJAR warning light comes on, then the locks click. They don't unlock, just lock. I've hit the unlock button, then they lock by themselves again. The dome light was also coming on, until I pressed the DOME LIGHT OVERRIDE button.
View 9 Replies2003 F250 extended cab .. I've only had the truck a couple of weeks... While I was check out some lighting issues I noticed that the power door locks are operating backwards (unlock is locked and locked is unlocked) is the a simple explanation or has someone wired them reversed???? If you wired the driver's door backward would that effect the passenger door??
View 5 RepliesI don't know if it's a new thing or if I've just noticed it but when I activate the OD off function the tranny drops into 3rd and the TC remains locked. This continues until/unless I slow down enough to drop into 2nd gear, then no TC lock when it upshifts to 3rd. There is a live tune in the PCM that came with the truck if that makes a difference. Is this a problem waiting to get worse?
View 5 RepliesI have a 2009 Corolla with no power locks.
All key programming sequences that I have found reference using the key fob and power locks cycling.
How can I program a new key with this base model car?
Vehicle: 2002 f250 xlt 7.3 powerstroke reg. Cab
Issue: door ajar light stays on, power locks on driver and passenger door don't work, radio stays on after truck is off an door is opened.
Events leading up to issue: went to temporarily hook up a wolo dixie horn to see if it worked. Wanted to do it fast so I took + cable, tied one end to the battery terminal and then connected other end to dixie horn relay. I then grounded both negative wires to the truck. One ground on the frame the other I temporarily wrapped around a one of factory ground mounts under the dash. Immediately after doing this the problems stated above started.
How can I fix this. I need to fix this by tomorrow. I have a guy from Craigslist coming to look at the truck. Now the 4x4 issue.
Truck has zf6 manual and the electric 4wd select ****. Just thought I'd list this if it was needed to be known for solutions.
4x4 high light stays on in while 2wd all the time. 4 low will stay on after switching back to 4 high and 2wd but it goes out if I ether stop the truck shut it off then restart it. or back up and slam on the brakes. Also when in 4 high the front driveshaft won't spin. However It will spin when in 4 low.
Another random issue I'd thought I'd just list while I'm writing this.... Cruise control does not work. And when I press the "on" button and the "coast" button at the same time the horn honks.
My truck would not open door locks for like ten minutes or do anything. then all off sudden it worked again its this twice...
View 9 Replies2003 f-150 Supercrew 4x4 ... I have no power to my windows door locks, power seat, mirrors a/c, anything is the a module that controls all of that stuff? Where is it?
View 2 RepliesThis is the it's always something post. Alternator rebuilt to 185. Batteries tested by AAA. When I went into the truck tonight the door locks made a clicking sound like the battery was going dead. Truck fired right up at 0 degrees.
I just installed WARN locking hubs and now I only have a defroster blower that works. Is there anything else besides a vacuum leak that might cause that?
6 CD Player has had problems loading and unloading for a few years but now it just says initializing and goes right back to radio.
I am really regretting doing the right thing two weeks ago and not letting this truck burn when it caught on fire on the Turnpike.
Driving today I noticed a hot smell, it went away shortly after. When I got home I noticed the electric door locks no longer function. I guess this will be a test of my 3rd party warranty!
View 10 RepliesI have a 2002 f150 supercrew, 4wd. The power door locks stopped working the other day and I am trying to fix it. So far I have checked the fuse in the power distribution box, good. I have checked the wires from the doors to the cab along the door sills to the rear doors , all good. I did find a couple of iffy grounds on the left kick panel and cleaned and repaired them. I am having a heck of a time finding the group of relays that control the lock and unlock functions. Remember , I have no power lock function at all. I would swear its not getting power to the relays but until I find them , I just don't know. Where they are supposed to be?
View 5 RepliesI have a 2004 F250 Super duty that had a battery die (I left the keys in the ignition switched on overnight) and after jumping the battery off the vehicle started up but now I have no power door lock or window functions. Any reason a dead battery issue might affect the power locks and windows?
View 10 RepliesI'm finally bringing my 99 regular cab to Texas next month and I'm putting together my first list of upgrades to do it. On the top of that list is a remote start system. I am considering installing power door locks so I can install a nicer RS system. It would allow me double my starting distance and take strain off my already bad back since I won't have to lean across the cab to let people in.
View 2 Replies2000 superduty. When you hit the door lock/unlock button, they try but won't move up or down on any of the 4 doors. The switches no longer are illuminated either. Where or have a wiring schematic for the drivers door with power windows/locks? I have done some testing for power, which seems to me there isn't enough voltage going to the actuators, but I can't seem to find power anywhere. The power mirrors don't work either. All fuses are good.
View 8 RepliesI am switching over to 08 door panels so in my attempt to rewire the door locks I crossed a bunch of wire that I shouldn't have because I had the wrong pin out and I shorted out the circuit. I rebuilt my 08 switches with the 04 parts so now I can reuse my old wiring connectors. I just soldered the old connectors back on and replaced the 30 amp fuse for the power locks. for some reason only the lock function on the passenger side works and it locks both doors but I have no unlock function on the passenger side or anything on the drivers side. Are there any other fuses that I could have missed? I don't have long to do anything invasive but as far as fuses I have all day to replace them. Basically I shorted stuff then I put everything back to the way it was stock and now my locks no worky
View 14 RepliesI have a 2003 6.0l f250 disel and when I am driving and get up to around 45 mph it will shift and start to shake the whole truck and even if you mash the throttle RPMs won't move and will not gain speed until you let off the throttle and then re engage but it will continue to do this and I cannot seem to figure out what is wrong.
View 13 Replies2000 crew cab powerstroke 4x4... It's a XLT, six inch lift, weld wheels, BFG all terrain (50%). 277,000. One owner. Clean Carfax. All service done by purchase dealer. Mostly stock other than that. Dealer just replaced AC compressor and charged system. Interior is good, except for driver's edge seat. Good cleaning and ok.
The (my?) Truck.Downside. Power door locks make noise but don't work, remote mirror switch intermittent, stereo broken. During my test drive (alone) it drove straight, stopped straight and hard. 4x4 engaged and worked well. No noise in system. Good acceleration. No rattles or noises. Doesn't drip anything on the ground. Cruise and all accessories work.
I'm supposed to go in Monday. My girl is afraid of the mileage. But it seems well maintained for 17 years old. Is 10k an acceptable price? They wanted 11,900. Anything I should be looking for?
The power door locks on my '99 Tahoe do not always work. Most of the time they all operate except for the front passenger door. It attempts to move, maybe halfway, but doesn't lock or unlock all the way. It works fine manually. The keyfob works the same way as the door switch. About 10% of the time they all work fine including the passenger door.
I've been told they might not be getting enough voltage due to loose connections. The connections look good as far as I can tell. What should I look for on my multimeter and where should I test it?
So my red door open light started staying on. Along with all the lights associated with the doors being opened. The lights don't always come on, but the dash lights stays. As a quick fix I just popped the bulbs out and went on my way. Tried lubing the doors. That didn't work. I started noticing it seemed to be related to when I was slowing down or turning.
I thought maybe it's my passenger leaning on the door around the turns. So I inspected all the doors, they latch fine and don't feel like they're open. Last night I was riding by myself, and I realized that it wasn't anyone leaning on the door. When I would slow down, at the same spot. I would hear a click and the lights by the doors would come on, as well as the light on the back of the cab over the bed.
It did it every time the whole way home. It was approx. 16-18 mph when it would click. It was the same spot each time but I couldn't really nail the exact speed and watch for deer. I originally thought I'd just replace the sensors in the doors, but idk if that'll work anymore since it seems to be affected by other factors.
My driver side back suicide door won't open. It is the top latch that is not disengaging. I think I heard something loose in that door over the past month. Am I going to have to take off the inside panel to fix it?
View 14 Replies