Ford 7.3L Power Stroke (1999-2003) :: Block Heater Won't Working?
Jan 3, 2016
I don't think that my block heater is working correctly if not at all.
View 14 RepliesI don't think that my block heater is working correctly if not at all.
View 14 RepliesI can't get my truck to start. The block heater isn't working and I previously put flush and water in it, intending to drive it and flush it directly after. Well I never really could drive it and now it won't start again. The weather is going to turn off cold, around zero this weekend. I need to know how to keep the block from freezing and cracking!
View 11 Replies I wanted to specifically ask about the block heater though. Since I bought this truck I never was able to start the truck without plugging it in. Now that it's not running I'm thinking much more about the block heater.
Is 56 too low for this old truck to start? What temp should a block heater have the oil temp as seen by AE be?
I live in the southwest so it's not very cold here. plugging in the heater was even required in the summer unless the truck had been running. What kinds of engine trouble would require being plugged in in warm conditions?
Doing oil cooler. Block heater plug is very tight. Is it reversed threaten?
View 1 RepliesWhen the block is cold my truck will not start. If i keep the block heater plugged in it will crank but is still a long start. I have tried just about everything i can think of and it is way too much to list so i will give as much info as i can.
New- gpr, glow plugs, HPOP, batteries, starter, fuses, valve cover harness/ injector and glow plug wiring, vacuum lines. I have checked out just about everything remotely possible.
I didn't have time to trouble shoot but heres my problem. I plugged my 2016 6.7L in last night and when I checked it this morning the block was still ice cold. I didn't have time to investigate but i did make sure i had power up to the truck. And i noticed there's a connector just after the truck plug as well.
View 14 RepliesDoes the block heater come with some kind of a cord? I found the Box Link stuff under the back seat finally, the dealer said the block heater should be under there too? But it aint there?
View 6 RepliesI have had this happen twice now. Starts fine, idles fine, then either sitting or just driving a block or two it starts running very rough, no smoke that I remember seeing, and now no power. Barely makes it up a hill. The first time I thought is was related to the heavy rain the night before. I had the tow truck coming and decided to try it again, this was after a few hours sitting. Ran perfectly. The second time, no wetness/rain, pulled away from the house and in a block or two, same thing ... rough, no smoke, no power. Pulled back into driveway, turned off for a minute, restarted and ran fine. Ran perfect today. What is the best injector cleaner to use in the fuel?
View 3 RepliesDon't drive the truck but once a week but since its gotten colder here than usual is been harder to start when cold. Of-course I go thru the glow plug wait and then it kinda stumbles when its about to start. I do it again and most of the time is starts but seems rough for a few seconds. Once the truck is warm, no more problems starting.
I'm wondering if I have a glow plug gone bad and that cylinder is not warming up for me. Today I plugged in the block heater for maybe 2 hours and it started first time. Also, if just leave the block heater plugged in for long periods of time.. would it get to hot?? and wonder how expensive that is, most heater are costly to run. I have a timer but just wondering.
Well, I swapped a 2011 F250 SC for an F350 CC and I really enjoy driving it. 300 miles on the clock. My old 250 had the block heater and the pigtail to plug it in was low in front of the radiator. This truck also has the block heater, but I cannot find the pigtail to plug it in. In 2016 where Ford hid it at?
View 14 RepliesOk, is it possible to blow a fuze if the block heater is still plugged in when starting? Almost did this the other day and wondered if its possible to cause a short or something.
View 6 RepliesWhat the coolant temp should be around after plugging in the block heater overnight? Not looking for an exact measurement since this can be affected by OAT and the length of time it has been plugged in. But when it's -15 to -20F this weekend I was wondering what to expect.
View 13 RepliesIs this common? No coolant in the oil-YET........
Any way to fix it without pulling the cover?
2002 7.3L SD ... He told me when he was taking his son to school he turned on the heater. When he did this he could feel the truck lose power, he turned the heater off and it drove fine. Turned it back on and power loss happened again. I haven't driven it to test yet or see what is happening but I also don't understand how this can happen. The heater did get warm, and he does not have to add coolant to the system.
View 13 RepliesThe heater fan stopped blowing the other day. The fuses check out ok. What would be the most likely culprit after that? relay? Switch? Blower motor?
View 7 Replies2003 CC 4x4 ... I am pretty sure I know what is going on, but I wanted to start a thread for when I confirm it. I am driving to work this AM and I hear the door ajar chime and I think to myself, uh oh...gauges all look good, there are no lights illuminated on the dash. I get to work and turn the truck off and my fan stays on. I think the ignition module is going bad. Either that, or my remote start is going on the fritz. I will update when I find out more.
View 3 RepliesHeater control will not adjust, the one in the middle. I can turn it up and down, but it doesn't affect how much heat the heater is putting out. The other two work correctly. Do I have a bad switch or is the blender valve sticking? How can I tell? '99 F350, 1.25M miles.
View 1 RepliesHow can I tell if the engine block heater in my 2010 Prius is working (dealer installed)? The one on my old Subaru made a hissing noise; the one on the Prius makes no noise.
View 19 Replies2003 Ford excursion 7.3L powerstroke eddie bauer edition, vehicle wont start unless the block heater has been plugged in and the block is good and hot. This is its only symptom. It is throwing the following codes when i try to start it. Mind you it is 70 degrees so it shouldnt have to be plugged in to start
P0470 : Exhaust Pressure Sensor. P1000 : OBD System readiness test not complete
replaced heater core because when pulling a trailer it would admit steam out the defrost vents and the smell of antifreeze, what it could be?
View 8 RepliesAir Intake Heater Plug Code Eliminator P0541
In conjunction with the AIH Delete Plug??