Ford 6.7L Power Stroke Diesel :: Window Washer Nozzle Breaking
Aug 6, 2014
Window washer nozzle break? My passenger side broke last Friday and then today when inspecting the driver's side it broke in the exact same place. They broke near where the nozzle that is inserted into the hose takes a 90 degree turn up through the hood leaving parts of the nozzle in the hose. I was able to squeeze the rubber hose with pliers to break up the plastic nozzle so that it would fall out. Attempts to grab broken nozzle piece with needle nose pliers were unsuccessful. Of course they waited too break until 8 months after my warranty expired but not a big deal. 10 minute install. I got the last two that the dealer had in stock.
View 14 Replies
Advertisement
I have a 2004 Super Duty with a 6.0 diesel. Recently the windshield washer seems to have lost some of it's spray power. It still sprays, just not very hard. I know it's not frozen, as it started this before it got cold.
View 3 Replies
I replaced my injectors n ficm, truck runs great. Now my wipers dont work. Turn signals, hi beams work. Got power at both fuses and they have continuity but no wipers or washer pump. Looking for a diagram for this? Is the motor located under the front cowl?
View 1 Replies
If it can go wrong, it seems like it does.... Washer fluid is not pumping. The other day I am almost sure I heard the pump running but no fluid came out. Yesterday I filled the reservoir and now I don't even hear the pump. It's been very cold so I thought maybe the fluid had frozen? I can't find the fuse listed for the washer fluid pump and was going to check that first. Where is the pump even located? 2006 F350
View 6 Replies
I am a new owner of a 2006 F 250 6.0.
I need to install a new washer fluid pump. My question is what is the best way to get the old one off and the new one on? Should I go from under the wheel well? Or is there another easier way to get to it? The truck didn't come with an owners Manuel and I cant find anything about how to do this.
View 2 Replies
getting weak spray/dribble (yea, it could be a "personal problem " on the drivers side squirter. Left side great. I have replaced both squirters and blew out the line where it T's over to the drivers side.
Still weak.. I'm thinking its most likely low pressure coming off the pump and maybe it's time to replace I haven't crawled under there to inspect placement of pump. Thought while there I would also replace the reservoir.
View 5 Replies
1993 ford ranger ... Having issues with washer fluid not working. Mine has started cutting out or not even working when I push the button. But if bang it on the end of the handle with something hard it will work just long enough to clean the salt off the window.
View 14 Replies
Windshield washer nozzle stop working? Is there an easy way to unclog it or does it need to be replaced?
View 3 Replies
I removed the 4 injectors on the drivers side of my 2006 6.0 to clean them up and replace the o-rings and copper compression washer. When I put it all together (everything torqued per shop manual) I am now getting P0266,P0291, and P1000 codes. I have checked the connection on the #2 injector, it is good, and I didn't have any problems with connectors breaking or going back together on the FICM...
The truck will start after a long crank,but smokes and runs rough. It was running without codes before I messed with it. The reason for tearing into It was it has experiencing a pretty big drop in fuel milage. I had been running revx and fuel additives with mixed results...
View 14 Replies
2011 F250 with hood mounted windshield washer nozzle. How do I remove the nozzle? In a campground with basic tools.
View 6 Replies
We have a 2002 7.3 f350 2wd this darn thing is now tripping me out. At first when ou start the truck its all good but when it warms up the idle is funky when you go to stop at a lite its like im power breaking and rough idle once stopped the idle is about between 800 and 900rpms at a stop really high idle but plenty of power on take off...
View 2 Replies
How to replace the windshield washer nozzle? If it makes a difference it's the driver side one. It's clogged and I'd like to try and soak it in some stuff to dissolve the clog and/or replace it myself. The dealer was going to charge me ~$150 to do this and trying to see if I can do it myself.
View 5 Replies
What is going on. You can hear the seal in the background making racket. I just got it back from my dealer saying they fixed it and its not fixed. Why that window seal would make all that noise. Its coming from that upper corner.
F350 wind noise - YouTube....
View 14 Replies
I have an 09 Camry SE. My right windshield spray nozzle is not spraying, it's just flowing out. I ran a small wire down it and nothing changed. I called 2 dealers and looked up the part and there are 5 different angles listed the dealers said I had to remove it so they could match the angle for the pitch of the windshield. Seems ridiculous that they would not know,but the parts breakdown lists all 5.
View 4 Replies
The windshield washers of 2014 Prius v (lowercase v for the Prius v) didn't work all winter if the temp was +20F or less. I'm using -30F or -40F washer fluid. I use the same fluid in my 1995 Previa, and its washers worked all winter. A friend has a 2014 Prius, which didn't have any washer problems.
I tried pouring warm water over the nozzles, but they're location makes it difficult to reach them. Is it the nozzles or is it the rubber hose that feeds them from the reservoir?
View 12 Replies
2012 Elantra GLS ... The windshield washer spray pattern is too low. The nozzles on the Elantra appear to be entirely plastic unlike the conventional ball which I can poke a needle in to adjust it. I ran the hand under the cowl cover and could not feel any kind of adjustment mechanism. How to adjust the nozzles to aim higher.
View 27 Replies
I would like to replace my drivers side window. It has some deep scratches and with the windows tinted it really shows. Been looking for place to buy from but can't seem to find one.
The only one I found was on Amazon but was trying to find one cheaper or with no shipping charge.
View 10 Replies
2011 F350 with the rear window defroster not working on the slider window, just the glass that slides.
I had them look at when it was in for other warranty work and the dealership says it is not covered by the ESP. I looked up the ESP and it states that it covers heated back glass(electrical only). The dealership says it is considered glass and it isn't covered. If it was the outer sides of the back window it wouldn't bother me, but it is the center piece.
I had it looked at a while back when the truck was in for different warranty work and they supposedly fixed it, it was never fixed but I just thought I would get it fixed next time I was in there instead of just going in for that. Last time I was there I was under the 60K mile warranty and it is covered under that, but not the ESP supposedly. Bad dealership or just live with it?
View 12 Replies
Truck is a 2011. What about fixing?
View 10 Replies
I have a 1995 945SET the rear washer pump works but no water comes out of the nozzle, where do I find the rear washer nose and how do I get into it to repair or replace it?
View 2 Replies
Having problem with a few drops of fluid occasionally dripping from the rear hatch washer nozzle? I notice it happening once a day or every other day after accelerating. Is there a quick fix or is it going to be a take it in, order parts, bring it back sort of deal?
View 23 Replies
