Ford 6.7L Power Stroke Diesel :: Service Traction Control / Downhill Decent Control Fault Messages Showing Up
May 23, 2014
I have 2 messages showing up in the message center / control panel. I have taken the truck to the dealership and we cannot recreate them while the truck is at the dealership. How it can be resolved.
2013 Ford Superduty Platinum : 33,800 miles and the truck is stock
Messages : service traction control / Downhill decent control fault
This will happen just driving down the road or just after starting the truck and taking off.
It has happened towing my work trailer and also not having the trailer connected to the truck.
View 14 Replies
Advertisement
Is it possible to add the decent control if my truck didn't come with it? Is the harness already wired for it and the computer programmed for it or would I have to get it reprogrammed and get a new harness?
View 6 Replies
How to completely turn it off, I got nothing so far. I cant do it with my H&S, I have access to ford IDS which is also unable to turn it off. The only thing I have found to work is unplugging a wheel speed sensor, which sets off dash lights... Im thinking of finding a body control module without advancetrac.
View 14 Replies
It just came on when I ran up to the gas station followed by the airbag light and the traction control light.. truck ran fine. I've tried looking this up found some people have had this message and there truck won't start.
View 6 Replies
My right rear tire picked up a screw this evening heading back toward Seattle from Chelan. I put the spare on and continued on my way. I noticed for the first few miles the traction control warning light was on. It went off and stayed off until I stopped for fuel and again it came on for a few miles. I'm suspecting this is due to a slight diameter difference between the 20" wheels with the Michelins and the 18" spare. I really hope this didn't stress the differential (3.55 ELD). As I understand it, unless locked the ELD is open all the time..... I would assume Ford wouldn't equip the truck with an incompatibly sized spare......
View 5 Replies
Does the traction control turn off and stay off when you push the button? I read an owners manual and the way it is written makes me wonder. It makes it sound like the traction control reengages when you put the truck in reverse. Even when you had it turned off.
What are the facts? What is the real difference between an F350 SRW at 11,200 or 11,500 GVW and one with the 10,000 GVW. Is it just paperwork or do they change springs?
View 2 Replies
My 2012 F250 6.7 once again (third time in 2k miles) got stuck in park with no brake lights or traction control. I found that removing the shroud from the steering wheel allowed me to manually activate the solenoid and get into gear but could only drive in manual shift mode.
Something is causing the brake switch fuse to blow. When I replace the fuse all is well for maybe 1k miles then it happens again! After the second time I replaced the brake switch thinking it was the cause but no deal. It happened a third time. The dealer who fixed it the first time could not find the cause.
This is frustrating and downright dangerous! What in the circuit could be causing the short?
View 14 Replies
I went outside and started my car yesterday morning and it was 20-25 degrees out and the car had a hard time turning over. Upon starting the dash computer read: Fault: Traction Control. Its a 14 GTI with about 1600 miles on it, could it have been not getting all 12 volts upon start up?
View 4 Replies
Well when it rains it pours. As I was picking up my truck from the dealer for the brake master cylinder issue I noticed some faults come up on the display as I got into my truck. It was a Hill Descent Control Fault and a Service AdvanceTrac warnings on the dash. I told the service write about them and had already cleared them thinking it was a fluke alert from the servicing they did. Well they have come back in and after some searching I hear that when we get these alerts the solution was Ford having to replace the entire steering rack??!!
View 5 Replies
This is the third time this has happend in a week I used my torque app but it says no fault codes but the warning lights are clearly lit and wont turn off unless I shut down the car. Its a 2012 with 8,000 mile?
View 6 Replies
2007 F550 with the 6.0. About 2 months ago I replaced the EGR cooler with a Bulletproof cooler. Truck ran well for a few weeks. Then I started getting the "turbo fart". I stopped using the truck until I had an issue with another truck. I was stuck so I sent the 07 out without cleaning the turbo. This morning a decent amount of white smoke started coming out of the exhaust. The smoke would sometimes get a bit gray. Going up hill it didn't have much power at all.
View 8 Replies
My truck threw a CEL after the first start today. The CTS reports it twice. I noticed it about two minutes after start.
P02E1 - Diesel Intake Air Flow Control Performance
The air box gauge is green and it doesn't reset when I push it so that appears to be fine.
The one thing I can easily notice is the sound of the turbo. Typically when I stop and park, the turbo spools up, then down, then spools again and gives a sigh of relief and it's then silent. It's not doing that currently.
Now, I can hear it constantly when parked and it spools down after I turn off the engine, even two minutes later. That is not normal for my truck when I wait for the above to finish its routine. When I start the truck, the turbo immediately spools to where I can hear it which is also not normal, as if it's building 0.5 psi. I realize that's funny to say on a turbo diesel but I know the sounds of my truck. The EGT's are fine, EOT, ECT, TFT are fine and I can build boost when driving without issue. I took the drive to work easy this morning so the highest I noticed was 10 psi.
I restarted the truck after a 20 minute drive to the office and it didn't clear the CEL. The CTS squawked four times when it woke up the second time but it didn't show me which PID it was upset about.
I'm thinking this has nothing to do with the CAI and this is something downstream of there. EGR related? I haven't opened the air box yet, at work and in dress clothes so that'll need to wait. My past four or five regenerations all started between 1.94 and 1.97 soot gpl. That is also not normal and is something I have been keeping my eyes on. Currently the DPF is at 2.10 so it has made it further. Normal behavior (post emissions flash) is above 2.54 soot gpl for an AR.
View 4 Replies
Evertime I turn left the brake light, traction control and stability control lights come on and the car starts dinging. Mechanic says it could be front wheel bearings because they are tied to the ABS system??? But I have been seeing alot about wheel speed sensors?
Second, everytime I brake suddenly, a cloud of smoke comes from the front end and there is a burning oil smell. The oil is fine and no leaks. Again mechanic says it could be a cracked CV boot throwing grease?
Lastly everytime I put in reverse or when I lightly put pressure on the brakes when driving I get this noise like a humming (errrrrrr) noise. Its not the grinding/squealing noise you would get when brake pads needs replaced. I only have 60k miles on this.
View 30 Replies
My college son's 2014 Charger V6 has developed three issues since he purchased it used in late May. The cruise control has stopped working and the anti lock brake and traction control lights are constantly on. Any possible cause?
View 15 Replies
How to fix SES P0670?? I understand there's a whole procedure on checking fault.
P0670:GPCM Glow plug control module control line failure. Open/grounded circuit, open/shorted GPCM, failed PCM
But how did you resolve problem? replaced GPCM, found open circuit, short --if so where?-- or replaced with updated harness.
(4C3Z-12B568-AA connector upgrade kit as in picture)???
View 14 Replies
My 2010 Subaru Outback recently surprised the hell out of me by simultaneously turning on the brake warning light, the traction control light, the check engine light and (just for a bonus!) disabled my cruise control while flashing the cruise control light. I pulled over, quickly surmising that all of those systems could not have failed at 70 MPH without instantaneous death to either me or the vehicle. Both apparently still being alive, I tried turning the car on an off to reset the lights. No go. Subaru was not going to miss this chance to get me to the dealership! (who I had avoided to this point!) As I was far away from home and the car being very healthy, it seemed, I decided to drive on. I proceeded to put a couple of hundred more miles on the car before I got back to town.
My car had 39,000 miles on it, 3,000 miles beyond the warranty end. I learned that I have an error code of P0171, "Fuel Trim Malfunction (Air/Fuel too lean)". So I guess I'm wondering about a few things...why would this sensor set off every light on my dashboard and disable my cruise control? Seems a bit overblown for running a bit lean. My gut tells me Subaru has a sensor/software problem they are not owning up to. I'm a big fan of conspiracy theories and this really smells like one...
Second, jeez, I'm only 3K miles over warranty, don't you think they'd cut me some slack. I mean I love my Subaru, or did anyway, until this happened. Now it's just another POS car that breaks for no apparent reason...
View 10 Replies
My check engine light has came on and I received these error codes
PO441 : Evaporative emissions control system incorrect purge flow.
PO 455 : Evaporative emissions control system pressure leak-large leak.
PO 446 : Evaporative emissions control system vent control circuit fault.
Also only my driver side fan is working, may be separate issue?
View 14 Replies
I had a nice level straight stretch in front of me and engaged the cruise control. No go! I tried a few more times and it still did not engage, even with various button sequences. My thought was that this truck is a computer on wheels. So at the next opportunity I stopped and shutdown the engine, turned the ignition switch OFF and then restarted started the engine (and rebooted the computer). The cruise control works fine!
View 14 Replies
I have a 6.7 diesel extcab longbed 4wd with the 3.31 rearend. I have been experiencing a surge primarily told by the boost gauge when using the cruise control unloaded and either or both going up a steady climb in elevation or headwind. It does not surge if I shift down to 5th. Does not occur pulling a load. Still occurs in manual mode and tow-haul mode. Does not occur if your controlling throttle with your foot. I find that it happens at speed of 65-70. It will boost to about 10 pounds then fall to about 3 and will continue this until maybe a hill or change in direction. It does not occur with a tail wind. I took it to the dealer today and ford had a new flash for the pcm and the tcm. Hoping that this would fix it but I don't believe it did.
View 14 Replies
Just looking for comments on using the cruise control while towing? and what's the recommended weight for using the tow haul mode. The enclosed trailer I have is about 3300 lbs. taking it across the country empty. 2004 6 liter.
View 11 Replies
First off my vents stopped blowing completely. At this time the thermostat was still functioning. Fuse 28 was blown. I replaced the fuse and it blew again shortly after turning the heater on. I replaced the relay and resistor and still blowing fuses. For some reason I tried a 30A fuse and it didn't blow but a few minutes after turning on the heater there was a burning smell. I immediately turned it off and pulled the fuse back out, which was hot. I then replaced the blower motor and at this point there is no power at all to the control panel. The fuses are all fine as well as the relay and resistor. There's power to the fuses. So it seems like somewhere between the fuse box and the control panel I'm losing power.
View 7 Replies
