Hearing a whistle noise after installing the Recon smoked turn signal lense? The whistle starts between 40 and 50 mph and is the driver side only. I have triple checked the installation and it has the same clearance all the way around as the left side. I sent Recon an email on Jan 5th about this issue and still haven't heard back from them.
View 14 RepliesLooking to replace my amber cab lights with the smoked lenses. For those of you that have done it, is there a certain brand that fits the OEM lights better? Seems pretty straight forward just remove one screw and replace the cover.
View 14 RepliesStarted truck, used windshield washer and noticed High Beam Indicator was lit on dash. Headlight switch not on. Drove to Ford dealer, turned off truck, high beams would not shut off. Dealer replaced the Turn Signal/wiper/High beam switch assembly. Dealer had one in stock. Service manager said they have replaced a few of these Switches. So if your High Beams come on without the headlight switch on you cannot turn them off even if you shut off and exit truck. Also the "You left your lights on warning chime" does not sound when you exit truck.
View 14 RepliesThe other day i noticed my turn signal was blinking rapidly. I found that my drivers side bulb was burned out. I am trying to convert most of my lights to LEDs on my truck and figured that I'd replaced the tail lights with LEDs. After replacing both rear taillights with LEDS I still have the rapid blinking turn signal. Whats the deal? is it just the LEDS or what?
View 13 RepliesLast night I was heading home from a two day race and found that my turn signals wasn't working. the running lights are working and obviously i could feel the brakes working.
well i hooked up some jumpers to a 12v battery and the 7 pin and the lights work. to make 100% sure it works i hooked it up to my neighbors Tacoma. it all worked. well..........
On my last f150 when it was new this happened to me too. it ended up being the turn signal fuse on my truck.
I hooked right back to my truck again and just made sure my plug was all the way in and still nothing so i know its my truck side.
Now my last f150 owners manual had a section to where it told you what fuse is what and where. well i don't even see the f250 fuse box is and don't know which one it is to see if its blown.
All of a sudden, my turn signal won't stop automatically after making a turn. I read that the multi function lever needed to be replaced. I did, and nothing changed... what is wrong since its not the lever assembly itself?
View 6 RepliesI have a 2004.5 Jetta GLi and I want to get rid of the Amber turn signal inside the headlight. Do they sell a clear or smoked lens for that, or do I have to buy new headlights all together?
View 3 RepliesI'm looking for a 3156 LED Amber turn signal bulb for the front turn signal, I've looked around haven't found anything! Any success story with this particular bulb, and does it require a load manager when installing?
View 14 Replies2004 F250 6.0L!!
An issue I noticed right off the bat was that whenever I had the driver side turn signal on, and the brake was applied, the turn signal freezes.
I took apart the tail light and found a concoction of wires...I posted a diagram illustrating what it looks like.
There is this pesky Red wire that is spliced into the tail light bulb socket wire (specifically the green wire).
There is a trailer brake installed...if this means anything. I've tried disconnecting that with no luck on fixing the issue.
How to further troubleshoot would be great...electrical work is not my forte!
I did some reading on here this morning and ended up at 1A Auto looking for mirrors. I want to make sure I get the correct thing before ordering. I have a '04 250 with factory tow mirrors that are power mirror and turn signal/clearance light. I want to upgrade to the '08 style. Which of these would work? I would think either, but I'm not sure about the wiring harness?
Search Results for 1AMRP01095 - 1A Auto
2008-10 Ford Mirror Pair - 1AMRP01096 at 1A Auto.com
2007 F250SD, R/H power mirror with LED lights no work. All other lights and L/H mirror work fine. Checked the fuse in passenger compartment, it's good. Where to start looking?
View 5 RepliesSwapping the 08 mirrors onto older trucks. Which wire I should splice into in the door sill for the right turn signals?
I have an 08, with the tow mirrors/turn signals integrated. On the passenger side, the turn signal does not work. I'm not getting power at the plug.
I traced the wire colors from the headlight and taillight turn lamps and tried splicing into the same colored wires under the passenger door sill. This didn't work (I did get it to work on park lamps though, just not the turn signal). I can't find wiring diagrams.
How to replace the turn signal bulb that is in the mirror on a 2001 f150 supercrew? My Haynes and Chiltons books dont say a thing about replacing this bulb.
View 1 RepliesI just picked up a 2004 F150 FX4 Supercab, I had a safety inspection done and am working through some of the issues.
The turn signal indicator on the passenger side mirror is not working (front and rear indicators work). I took the mirror apart and get no voltage to the led array, next I pulled the rubber boot off of the harness in the door jam and probed the wires while with a test light and found one of the wires would blink the test lest light but the colour didn't match the the turn signal array, it matched the heated mirror wire. I probed at the heated mirror connector at the mirror and sure enough it blinks! Then I notice that the heated mirror indicator light on the center dash is blinking? I push the heated mirror button below the indicator light and ALL turn signals (front and rear) stop.
I searched the forum for mirror turn signal issues and found a thread about corroded wire splice below the fuse panel. I checked and have no splice all look ok so I thought I would post and see if I can get some direction or a schematic.
The symptoms are :
- Passenger side mirror turn signal(right turn) indicator does not work
- front and rear turn signal indicators work
- power seat works
- fuses are good
- drivers side all turn signals work fine
- heated mirror indicator light on the dash blinks with the passenger side turn signal
- pushing the heated mirror button when turn signals are flashing (right turn) results in a solid heated mirror indicator light but all other right turn signal indicator stop blinking (off)
It seems to me that there must be a short between the two circuits but where?
I've done a bunch of searches and can't really find much. The turn signal in my 03 SD doesn't work, and the back side is loose, probably a broken tab. I have cranked the mirror up, down, right and left, popped the tabs loose yet it feels like I'm missing one or a screw. I read that I may have to "Pop" my mirror off to get to stuff. The dealer said I have to buy a complete mirror assembly just to change a freaking bulb on an 03?
View 1 RepliesMy truck has done this since I got it and it's pretty damn annoying. While at idle the rear view mirror vibrates slightly and drives me nuts. If you give it any gas at all it stops. Like I said its super slight but it's enough to notice for sure and makes stuff look blurry if your looking through it.
View 5 RepliesCouldn't make it 10,000 miles........without a failure.
My driver's side mirror finally broke. It will no longer power fold. It's been slowly dying over the last few weeks, getting slower and slower. Now it won't move on it's own and the electric motor hardly makes any noise/effort trying to move the mirror.
I would assume that should be replaced under warranty but who knows... We'll see what service says about it tomorrow.
I have a 2003 F250 Lariat with the OEM power mirrors with the turn signal on them. I let someone drive my truck and they hit something with the mirror and broke the plastic lens. The mirror housing itself is fine. I can't find just that lens anywhere!
View 7 RepliesI have a 2007 Envoy SLT. The turn signal bulb that is located on the driver's side mirror is burned out. How do I replace the bulb?
View 1 RepliesMy folding mirror on the drivers side folds out good but when bringing it back there is a clicking sound and it doesn't move, a slight pull on it and it comes back ok. 2011 F350 SD.
View 7 RepliesHaving issues with their mirrors folding in? One of mine makes a popping sound and will not fold in or out. I can hear the motor running, sounds like a gear is out of alignment. Have tried to reposition manually with no luck. Is there a rebuild kit for the internals or will I need the entire mirror assembly?
View 14 Replies