Ford 6.7L Power Stroke Diesel :: Paint Damaged On Arm Rest - Repair?
Feb 23, 2017
So my dog was riding in the back seat of my 2011 SD with covers when he suddenly went nuts over seeing a bunch of Prong Horn running along the road and jumping a fence. It was pretty cool to see, but he scratched the heck out of the arm rests.
How the scratched dark grey color can be repaired? Everything about the truck has remained pretty pristine inside and out, but this is really bothering me and I can find no information.
I'd even consider recovering all 4 with some sort of kit, if available like they have for some dashes and interiors.
View 5 Replies
Advertisement
I recently picked up a 2005 F350 6.0. I got it cheap with a plugged oil cooler, and went in planning to do studs, gaskets, and all the Ford updates just to have it out of the way. When taking it apart, I quickly noticed that the compressor was damaged. Looks to me like some foreign object(s) entered the turbo, would bounce off the wheel, impact the cover, and repeat.
Engine seemed to run great. Turbo spooled quickly and while I wasn't paying close attention, I'd glance when accelerating and it'd be in the neighborhood of 27 PSI. Engine cranks evenly and starts well, so there's no obvious engine damage. I'll inspect the bores closely with the heads off.
So my main question: Assuming no damage elsewhere, Do I need just a wheel? There is some pitting and high spots on the cover, but could it be carefully worked down with the cover removed? Do I just need to get a wheel and a cover? Or just a whole new turbo? Looking for a budget-friendly option to remedy this properly.
View 7 Replies
Had oil seal failure on the rear differential at 35,000 miles?
View 6 Replies
I own a 2011 f350 diesel. So 2 weekends ago when it iced over in DFW I ended up doing a bunch of driving in 4wd. I pulled out a couple people, even pull out a semi.
After this the truck went on the fritz and gave me a CEL regarding the tcm losing communication with the rest of the electrical system. The truck was stuck in 6th gear and all things related to the tcm gear indicator didn't work. (remote start, backup camera, traction control, stability control and trans temp gauge). I did have drivability issues with the trans when it would sometimes bang gears when i would get on it suddenly and it could get generally confused at times, so generally I drove it pretty gently. The truck had to be towed to the dealer because after a while it would only get neutral of 1st gear and obviously it shouldnt be driven like that. They replaced the tcm under warranty.
The kicker is that all of that trans bs is now gone, there's no more confusion and gear banging.. drivability improved 10 fold. Obviously they updated the software but i was wondering if that was all that was needed to get this trans in gear? (pun intended) maybe they did something else?
View 5 Replies
I am doing heads studs and gaskets on the truck. I forgot to remove the stand pipe and started to lift the head off the truck with the engine jack. Well i bent the stand pipe and the port to the bock was a little loose. Tightened it back down and it seems ok. Could I have damaged anything by doing that? how is that all connected to the high pressure oil pump? I just want to make sure i didnt damage anything by doing that and since im already here I would rather make a fix instead of needed to tear down again.
View 5 Replies
Removing the radiator on these trucks to repair the leak? It looks pretty straight forward. Remove the fluid, grill, hoses, and the few screws on each side that connect the other cooling coils to the main radiator. then hopefully it should slide straight up and out. A radiator shop said they would replace the gasket between the plastic end caps and the radiator if I take it to them. Which brings me to my next question. Is it the gasket that is causing this notorious leak or is it a crack somewhere or a loose crimp? Mine is leaking from the usual spot. Driver side on the bottom at the seam. Then runs down the frame to the ground.
View 6 Replies
When I dropped my 2 frame rail batteries I noticed the clamp on the positive battery cable was broke. How to splice in a new clamp?
Pick and pull is an option. I would rather repair my OEM cable and be done.
View 4 Replies
2003 250 superduty 6.0 ... I had to do the icp sensor. I went in from the top and discovered that the oil cooler was failing also. Replaced the icp and the oil cooler. Got it all back together. It would crank but wouldn't fire up. it did try for a about a tenth of a second. that's as close to firing as it got. The shifter has been loose. i ran it through the gears and the back into park. now it won't even crank.
Took the starter in to have it tested. it tested fine. Went to put it back on the truck. With no real force tightening the electrical connection it just snapped off the solenoid. put a new solenoid on it. Still no crank. Checked all related fuses and relays. They all seem to be good.
When I turn the key to on I get the buzzing noise and everything. Been through a lot of the no start check list. I don't have the ability to quite test everything. But what i can check. i do have an obd2 scanner. I cleared the code for the icp. I don't have any other codes showing. I have tripled checked that. After the weekend I am going to have to give up and take it in I think.
View 14 Replies
how can you tell if your vapor recovery system is faulty? I cannot fill my gas tank unless I very slowly put gas in. It takes forever to even put in a few gallons. I think the vent is plugged or I overfilled the tank and got gas in the canister.
View 3 Replies
I have a 2006 VW Golf with 140,000 miles. Last week took it to the shop to have a wheel bearing replaced. Mechanic also replaced the wheel hub. When I left the shop I discovered a new problem that had not previously been there. Now the Anti-lock brakes are kicking in at the very end of a soft stop on smooth, dry roads and even in my garage. This happens about 20% of the time, but never during a hard stop. I took it back to the shop on Monday and mechanic could not find anything and was perplexed. The question is whether the ABS sensor could have been damaged during repairs and is the car safe to drive?
View 14 Replies
2002 Excursion, 7.3L 375,xxx miles ... As the weather is cooling off, my excursion has a starting problem for a few years.
Replaced all the glow plugs last year. We (my brothers and I) thought it was injectors, but in the summer time or if block heater is plugged in, she starts normally and idles smoothly. And no smoke and runs fine once she warms up.
When cold, it acts like 1 or 2 injectors are not firing. Have run all kinds of cleaners through the oil and fuel.....
Don't want to swap injectors just to swap parts. Would like to diagnose problem....
View 14 Replies
Do I have to remove my fuel filter and bowl to attempt a repair on my HPOP leak?
View 6 Replies
My crew cab got T-boned last week and I'm looking for parts to fix it if insurance keeps messing around. Is it possible to use the entire cab corner from a regular cab instead of a crew cab?
View 8 Replies
Parts came from Riffraft Diesel Performance. A set of "o" rings for the injectors. High flow CVD fittings for the fuel lines. Turbo rebuild kit. (its got 210,000+ miles) Anti Surge compressor wheel.(ok its not part of the oil problem)
Photos to come. I will take during the rebuild.
View 14 Replies
I've had a CEL for awhile so I final had it checked. It is the P0605 pcm memory error. He cleared it to see if it will come back. There isn't any chip or never has been a chip in it as far as I know. If it does end up being the pcm, what are my options? can it be repaired? Do I need a new one? Can I get a used one and if so what are the criteria I need to look for, for it to be compatible?
View 6 Replies
I was hearing a clicking noise on my passenger front wheel when rotating by hand.
Paul suggested I remove the ESOF hub and see if it is the wheel hub or the ESOF hub. It's the ESOF hub.
So I'd like to rebuild it for sure, it also has a nicked o-ring, so that accounts for part of the vacuum leak
I'd like to service the driver's side, too, while I'm at it. It doesn't exhibit any issues, so just regular maintenance stuff there.
Parts lists?
As always, I'll take pics in return
View 14 Replies
Is there a way to repair an individual switch on the drivers master window switches, or do I I have to replace entire 4 switch and window lock set?
View 8 Replies
Started today. 2004 with 235k miles. Owned for last 10k miles. Engine was recently studded, has egr delete and ccv bypass. Runs and starts fine. New Ford oil cooler too. Checked for codes. None for misfires, perdel are reading 0.
If it sits, on start up clear exhaust, as it warms, more blue smoke. Smells like oil not diesel.
Researched before asking and found leaking turbo seals can cause this. So we pulled the intercooler tube in front of the engine going to the intake expecting to find oil residue. Nice and dry. Was this the correct one to look at?
When we got the truck we had the dealer do a relative compression test and was within limits, it did need 1 injector that we replaced. What would be the next logical place to look?
Couple more points:
- Just changed oil last week, checked today, it was slightly over full.
- Coolant is fresh and has not changed level since we got it.
- Pulled fuel filter to see if any oil, but it was nice and clean.
View 11 Replies
I filled up at the same fuel station I've filled up at for 6 months, never had a problem. I just bought a 6 liter and put some injector cleaner in on the last fill up. Ever since then, it's been running really rough and missing when cold, and even when it's warm if I really lay into it, it'll pop and sputter. The fuel in water lights been on since I bought it. I think I have a bad sensor, because it was running fine until I put that cleaner in. Since its been running rough I put in new fuel filters and drained the fuel water separator, which only had fuel in it. I don't really know what it could be, but I'm 99% sure it's an injector issue since it started only after I put fuel treatment in.
View 8 Replies
It only happens on a very Rare occasion.
When Cold, and when I start out as I open the throttle, it suddenly sounds like there is not a piece of quieting stuff on the engine. I mean its like I can hear right into the engine itself.
I back off, It goes away then I dont hear it again for another Month or two.
View 14 Replies
Keywords: Diesel fuel, tank capacity, 26 gallons, fuel tank, capacity, false advertisement.
On my 2012 F250 with 19k miles I have NEVER been able to fill tank with more than 22.4 gallons of diesel fuel. That was the day I ran out of diesel going to fill up thinking I had 26 gallons. Once the light comes on I'm filling up, I have every tank fill DOCUMENTED with (date/cost/gals/trip/$per gal).
Talked to local dealer Raleigh, NC , their explanation was fuel pickup was raised to prevent contaminates from getting into injectors. They advertise 26 gallons, should be able to access 26 gallons.
View 14 Replies
