Having issue with synthetic oil (Rotella T6) causing leaks in the 6.7? I'm getting ready for my first oil change and I don't want to have an issue like I did with my 7.3 leaking from the oil pan gasket when I used synthetic.
View 14 RepliesMy 2004 6.0 has lost some power and the head gasket is leaking into the coolant. How long can i continue to drive the truck before too much damage is done to the engine?
View 10 RepliesI LOVE my Super Duty and with only 15k on it (have a company truck) plan on keeping it for a long time. I've had an EGR Delete and new Oil Cooler along with some misc things done to the engine and turbo, about 6g's worth. Now my mechanic at NCB is telling me that the reason I'm loosing coolant is that my head gaskets are leaking. I'm looking at another 5-7 grand which is a no go for me. I'm thinking of doing the work myself, especially since I've seen where i don't have to remove the body to do it.
Okay, here is the question, I've been having a hard time finding a comprehensive list of the parts I should be getting to do the job. Looking for a list or link on what I need to do it correctly and anything I might want to do while my engine is apart so I don't have to do this again?
New diesel owner looking for some info? Currently approaching 9k miles. My first oil change was done by the dealer. I was looking at my owners manual on what weight of oil to use. I am thinking of going to a 5w-40 oil but all seems to be synthetic. Do i need to do anything special if i am going to change from a conventional to synthetic?
View 7 RepliesIs there a MPG gain with synthetic oil or adding a tonneau cover?
I'm planning on doing the tonneau but curious if any noticeable differences with either.
I purchased the truck over a year ago and never had a problem with the transmission. The only issue was a leaking transmission pan gasket so I changed it put the same fluid that came out back in it since it looked brand new and didnt smell burnt or anything. So fast forward time and my girlfriend was driving the truck over the winter and lost control of the truck and spun it around and hit the front end of the truck into a rock wall.I have a weston bar on the front end that took the majority of the hit.
Shortly after the transmission would start to run warmer than normal. It would be 20 degrees outside and my transmission temp sensor would be reading around 140. Now that the weather is getting warmer the transmission is heating up a lot more. I took it to a guy to have him look at it and thought maybe the cooler was clogged or something like that and possibly put a larger cooler on it. He called me up a few days later and said their was a larger cooler already on it but it was not hooked up. It is a black one mounted on the front of the radiator. He said he cut the lines off of the old one and there was a slight bend in the one line so he cut a little higher than that line and then hooked up the cooler.
He told me he blew in the lines and there was no restrictions in it, i guess no pressure when we blue on the lines. I drove it home and the temp went higher than ever before up to 220. The cooler on the front was ice cold and trans pan was hot.I am starting to think maybe the bypass is bad and the fluid isn't getting to the cooler. The fluid is still pink and does not smell burnt so I want to fix the problem before any issues arise. The truck has 137000 miles on it. I have attached pictures of the cooler that he said was already there but not hooked up.
So, I blew my head gasket and have been looking for what to replace it with. From what I've seen, just an OEM gasket would be best.? I'm also putting ARP studs in it, unless there's another brand I should put in it.
View 3 RepliesTruck is a 2006 F-350 6.0, ARP studs, Ford Head Gaskets, Bullet Proof Diesel Oil Cooler Kit and EGR with an SCT tuner on tow mode.
Towing approx 15,000 pounds noticed truck started to lose power and misfire. Pulled over and noticed engine oil all over the driver side on engine, looks like it sprayed to top of engine as well. Oil on valve cover, FICM, exhaust manifold. I looked under the truck and saw that oil is all over bottom of the truck, differential covered in oil as well. Looks like blue smoke coming from tailpipe and smells of oil burning. Cannot tell where oil originated from.
I removed the EGR Valve, to see if there was moisture on the valve and when I looked into the intake manifold there is engine oil pooled in the bottom of the intake manifold and on the EGR Valve.
This is not dirty water from soot, it is oil. Truck is misfiring, with no codes being thrown. I noticed a small amount of white residue around the radiator cap however I had just filled up the reservoir, week prior. I unfortunately do not have gauges in the truck and rely on the factory gauges; coolant temps did not rise or move at all when this happened. I am not sure if I blew a head gasket, and really confused on how engine oil got into the intake manifold. I ran the engine with the air filter removed and can see blue smoke coming out of the CCV and oil in residue in front of the turbo inlet.
Are you supposed to reuse the old metal gasket or leave it out?
2006 F350 4X4
I just did head studs, gaskets, egr delete, oil cooler, hpop, up pipes, exhaust, and turbo rebuild on my 03' 6.0. I started the truck and it ran kind of rough but I figured it was air in the oil. Then I heard a choppy sound from the tailpipe and my first thought was bent pushrod. I let the truck run for a couple of minutes while I looked and listened to the engine and it seemed alright but I shut it down to pull valve covers. I had a code for cylinder 5 contrabalance so I started there.
The pushrod was definitely bent so I ordered one and threw it in. The truck runs amazing now compared to anytime I have ever heard it run, and all rockers move as it looks like they should but I still do have popping through the intake. I took cylinder 5 pushrod back out and I think the gasket bent from when the pushrod bent the first time. Even though the rocker is moving I think the bent gasket is pushing the pushrod on the side of the lifter maybe? The guide in the gasket is folded over and I don't know how the hell to bend it back besides a screwdriver.
Early 04 but 06 motor, Coolant filter, BPD EGR cooler, Head studs. I did use the search tool, overloaded with EGR cooler leaks and head gasket failure in the results.
Noticed ECT Spiking 217 (EOT 187)as went to post office,10 min run time from a cold start. Checked Degas a bit low, did my business and went home. Got home ECT 223 EOT(221) zero coolant in Degas and notice this mess. as well as puddling up under radiator.
I left the truck running and added some water to the degas hoping I could spot the leak, no love.
On our trucks do we have a weep hole for the water pump? I didn't notice any water or stains around it or the pulley. Nothing around the hoses either... yet.
Once it cools I am going to pull the fan shroud and look for a possible hole in radiator. Are there any other suspect areas?
What is the part number for the gasket that goes on the water separator on a 2003 6.0 diesel.
View 6 RepliesI'm going to be doing head gaskets on my 2006 F350 6.0. I know I need the head bolt tool and head lifting fixture. I have the tool to release the injector wiring plug from the head. Are there any other specialty tools I need? I saw in Hot Rod magazine a few months ago there was a new head gasket for the 6.0. Unfortunately I don't have the magazine anymore. I can't remember the brand of gasket. I know everyone in the past has said use OEM Ford head gaskets. Lastly, can I do the head gasket job and put studs in without pulling the cab or HVAC box?
View 7 RepliesI need to remove my EGR valve to clean the unit of carbon. While there I will be removing the intake elbow to check if I have the throttle plate installed on my engine. What the part number is for the gasket / o-ring that seals the elbow to the intake manifold??
View 7 RepliesMechanic at work told me to run 10-15 k.
My truck is my daily driver for work and such. Occasional 300 mile round trips to see family.
Last time I changed my oil was in June. And I've put about 6500 miles on it.
I run royal purple 15-40
I just not sure what to believe. Maybe someone has a link to an article ?
So this '06 F350 is blowing fluid from the steering pump fitting when you move steering wheel to either side all the way(lock). Is the internal o-ring blown in the fitting? Do these have the teflon seal at the pump? Pretty new to the 6.0 scene. Got a new line ordered.
View 6 RepliesIs there one thing that when broken makes both the steering and brakes lose all power? Does the power steering and hydroboost share a pressure source?
My brake pedal is dead and I get no steering boost, but the master cylinder and PSP are full of fluid. Do I replace both, or replace one first to see if that fixes both? Or could it just be a hose leaking? Not sure how to diagnose this one.
, 211,000 miles and the third radiator that was put in this truck is leaking!! Has there been a recall This is not right. I haven't even had the truck five years and this will be over 5 grand in radiators. Is a person suppose to budget an extra grand a year if they want to own a ford diesel?
View 14 RepliesLast night I noticed oil on my driveway. I got up under my truck and it was dripping at the trans. I'm not sure that's where it's actually leaking from because the other side of the oil pan had clean oil on the outside of it. What this could be?
View 13 RepliesI use motor craft filters on all my fords but I'm considering jumping ship on my 6.7l... Here's why:
Even with a small punch that is just shy of the total length of the filter, I still get a boat load of oil leaking out the side of the filter when I unscrew it. I'm pretty sure the anti drain back valve is still holding oil in the filter mount...which is what it is supposed to do.
looking at a 2006 180,000 miles in super condition except for a bed plate leak that was identified by a dealer and quoted $4200 to fix it. Owner elected to not fix.
Doesn't drip much at all, couple drops over the coarse of a day perhaps. What happens if you let this leak go?