Ford 6.7L Power Stroke Diesel :: Got Message Check Coolant Additive?
Apr 5, 2014
The other day I got the check coolant additive message. I've heard that you need to test this every so often. My truck has 67,000kms. so maybe 45,000 miles ?? Anyways.. At first I thought it was a LOW coolant message not reading it thoroughly the first time.. So I was quick to check the coolant level. The level in the drivers side looks ok but the passenger side seems a bit low. I can't not see any leaks what so ever. So question 2. Are both overflow reservoirs or is one for this coolant additive.
View 14 Replies
Advertisement
OK, just about to turn over 17,000 miles on my 6.7 and got the message to "Check Coolant Additive". So I came here and did a search, read a bunch of post, gained a little information, but not enough. You know how it goes with the subject gets off track and never comes back to course many times.
So my question is, do I purchase the kits, from what I read it would appear that there are two different test kits required.
Or do I just take it to the dealership and have the test performed? Also from what I have read it would appear that this is a timed message response and not an actual computer generated test...correct?
View 14 Replies
Got a "check coolant additive" message in my message center, but the owner's manual isn't too useful explaining what it means or what I should do.
View 9 Replies
Driving to work this morning and I get a notification "Check Coolant Additive". Sure, I've got 12,100 miles on it but come on. Dealer dip a test strip in the coolant to check it out. He says it only takes a few minutes to check provided the engine isn't too hot. I guess the "coolant additive" is something that the computer monitors to make sure the coolant is still good.
View 14 Replies
I called my servicing dealer and he was unaware of the message or how to check/test this. He also did not think it was a warranty issue.
View 14 Replies
How do I reset the "Check Coolant Additive" message. Pressing OK turns it off until I restart the engine.
View 4 Replies
Got the warning on the message center.. 2011 F350 38,000 miles. I am not original owner, has lifetime POWERTRAIN so thinking of letting dealer handle this,,,but..?
With the importance of these cooling systems.. and coolant being in there for approx. 60 months.. I am thinking why pay for test kit or pay dealer to test it and add additive...
I guess I could just buy the oem coolant and distilled water and drain & fill it myself... but can I use garden hose to flush? Or just better to let FORD handle it?
View 4 Replies
How can I turn off the annoying Check Coolant Additive notification? I won't be taking the truck in for service for another week and don't want to look at and acknowledge it every time I start it up until then.
View 5 Replies
My 2015 F350 6.7 has 13,400 miles and displayed the check coolant additive warning as I pulled into town from an 850-mile round trip this weekend. If the radiator in 2015 is still the same as the one used in 2012 etc discussed in another thread?
I will call my local dealer tomorrow. I do not see any obvious leak at this point. I had the oil changed before taking the trip and assume all fluid levels were checked.
View 14 Replies
How does one clear the computer to prevent the display "Check Coolant Additive" from appearing every time I start the truck. I know that a chemical test is needed to determine the status of the coolant.
View 2 Replies
I have my check coolant message on my display again... I need to get the fuel filters changed so I'm thinking of having the coolant flushed too. 45,500 or there abouts on the ODO.
View 9 Replies
Got a warning Coolant additive low and checked the coolant reservoir is above the cold fill line on the big reservoir and on the small reservoir(near the Radiator neck) it also is above the fill line. What could the message be telling me? The second message is "Cleaning exhaust filter" and it come and goes. Is this a warning that I need to do something about?
View 7 Replies
OK, I got the message, ran the tests, all is well. Now how do I clear the message? It's a 2013 F350 6.7PSD.
View 11 Replies
A few days ago my check coolant additive message start popping up, 14k miles. After doing some reading it sounds like all I need to do is either have my coolant tested or get the test kit and do it myself. My confusion is which test kit to purchase. Since my truck is a 2015 PSD some people are saying that I need to buy a test kit that comes with test vials instead of using the test strips. Which test kit should I buy?
View 14 Replies
Someone just told me I need to put additive in coolant so the injectors don't rust. I've never heard of this.
View 14 Replies
Nothing mechanical, fuel filter change and coolant check. While its there I am going to have them look at a few things:
1. Back up sensors - they work intermittently with a message that comes up saying "check back up sensors" or something to that affect on the display. The icon on the display that lets you check off or on will not let you put a check mark next to "on" after you push the "OK" button to get out of the check message. There is nothing coating the bumper/sensors (mud or anything).
2. Blinkers - sometimes, out of the blue, my left turn signal comes on and it doesn't like to go off. I have to push the blinker wand down to the second full position then back, or repeat if it comes back on. It is almost always the left blinker. It also happens sometimes when I start the truck.
3. Windshield wipers - sometimes if I go from the remote start to key power in the morning I get the windshield wipers going. So I will turn them on with the dial and back off. This is pretty rare.
4. The Ford emblems are starting to corrode.
5. I might have them look at the cruse control - sometimes I can get the light to come on the dash and go to green when I push the + button, but it doesn't hold the speed. I have to shut the truck off and restart all the electronics for it to start working again.
How to check the back up sensors? My gut tells me with the rest of the issues that unless they can repeat and verify my "complaints" they won't be able to do anything. There probably isn't a code thrown for the blinkers going on at will. Is there anything I might be able to do to fix it? Or do these issues require parts being replaced - which we're back to square 1 with being able to verify what it's doing at the dealer?
View 7 Replies
Get the message every time at start up and won't go away. It doesn't seem to be working when I back up near something. If one sensor goes does the whole system shut down? Also It won't let me check the "ON" box for the park aid.
View 6 Replies
My low fuel light came on tonight. I drove about 2 miles, stopped and shut the truck off. When I restarted it and began to drive off to the fuel station a notice came on that isaid power reduced then a check engine light came on. I was about a mile or less from the fuel station so I filled up. I cycled the key but the engine light is still on. No low power message tho. The power is fine.
I came home and drained the water drain on the filter, didn't see any water but hoped it would solve the problem. I cycled the key a few times and started the truck but the light is still on. My truck is a 2013 f350 6.7 and has 211500 ish miles on it. I bought it a month ago with 18500 miles and haven't had any issue until tonight. My only thought is maybe the fuel filters need changed. I don't know if or when the previous owner changed them.
View 10 Replies
I have a annoying check coolant additive warning light that wont go away, is their another way to turn off the light other than the button on the steering wheel? I have searched the forum but have had no luck, my coolant level is at it's proper level.
View 3 Replies
I have coolant blowing out of my coolant reservoir when ever i hold it to the floor it does it with or without the banks programmer... 6.0L power stroke...
View 14 Replies
Well got home and the front of the truck was covered in coolant. I must have driven 2 hrs after I noticed no coolant pressure, but temperature was great so figured it was another crappy cap. Looking to get a quick turnaround. Need to go out of town for work Saturday so I have this week to get it done.
Just put a stock unit back in? I don't think I need to do anything else in that area. Belt/pulleys/radiator all done last spring.
View 9 Replies
