Ford 6.7L Power Stroke Diesel :: Flashed Message - Clean Exhaust Filter?
Mar 26, 2016
We have had our Ford 6.7 diesel for a week today and on the way home I am pretty sure it did a regen. It flashed up and said "clean exhaust filter, then the miles per gallon dropped to down around 11 from 15.5 rather quick. The truck smelled really hot and we drove it for about 35 miles to home and MPG started going up and now it's ok. The thing that stumped me was that the truck only has 620 miles on it vs 6.7 miles it had when we bought it last weekend.
View 11 Replies
Advertisement
I've been having frequent, low speed, short trips lately and have been seeing the 'Cleaning Exhaust Filter' message pop up. Given that I have only been mere minutes from my destination in each case, I thought 'good luck with that'.
Today I see the 'Drive to Clean' message, followed by the 'Cleaning Exhaust Filter' message which stayed on (I have been used to it appearing for only a second or two.)
It should all be fine tomorrow though as I have a longer trip planned.
View 6 Replies
I am at 34,600 miles and had the oil changed yesterday afternoon. My son picked the truck up for me and on his way home the "drive to clean exhaust message" came on with the "check engine light" at the same time. I get home from work, re-check owners manual and no mention of the check engine light coming on with the drive to clean message.
I called my service rep and he says drive it as per owners manual, so I head out drive about 45 miles, averaging 60 mph nothing changes, both lights/messages are still on. Truck seems to be running fine and the last cleaning exhaust message was Sunday and I believe I was out long enough for it to do its job. It will go into the shop tomorrow, but was looking for thoughts from the the rest of you pros before I go.
I mention the oil change only because after the last oil change at around 30,000 miles I drive to work 2 days after and my water pump starts leaking.. coincidence I know.. but getting freaked out as I approach 36000 miles..Truck is a 2011 and I bought it new in Jan of 11.
View 14 Replies
I got a 2 second "cleaning exhaust filter message" on my drive home tonight in my new truck with about 500km. I completed my drive and pulled off the highway into my yard. I don't know if it had finished cleaning yet but I unloaded the bed and then got back in the truck and drove another mile or two until the fuel economy was normal normal again.
The reason I did this was the underside of the truck was clicking and pinging as it cooled. You could smell the heat. Is it necessary to drive to complete this cycle? Or could I have just pulled in and shut it off. I'm sure it would finish on the highway in the morning. Other then the fuel economy increasing I couldn't tell anything else was going on.
View 14 Replies
At the end of hauling ny 5th wheel on a 2 hour drive I received the exhaust filter over limit message and engine light came on. It's a 2015 f250 super duty with 11500 miles. I called the dealer when I got home and he recommended changing the air filter. I did that and then drive 1000 highway miles on a vacation, mostly hauling the 5th wheel. The only light/message I get is the check engine light. The truck will not attempt to regen. P2002 and p24a2 problems.....
View 8 Replies
My truck started to display exhaust filter clogged and cleaning exhaust filter multiple times today. The cleaning exhaust message stayed on until I hot OK and then it comes back later. Not sure what this means?
View 14 Replies
New to Diesel trucks, have a 2012 F250 with 4000 miles on it. for the first 3000 miles I would see regular messages about "Cleaning Exhaust Filter" about every 100 miles or so, but this last 1000 miles I have not seen any?? I drive about 100 + miles a day, 55 to 65 mph so I'm sure I'm running it long enough.
The other thing I've noticed is that my MPG has gone from 17 down to 14 which is what I would normally see during a cleaning cycle. It almost seems like I'm in a constant state of cleaning as my MPG has taken a dive... Any things I should check?
Side note, I towed a 30ft RV around the 3000 mile mark, since the tow I haven't seen the message.
View 14 Replies
Last week I picked up a 2016 F-350 with the 6.7 diesel. Since then I have put about 4500 miles on it and gone through 2 or 3 regenerations. About half the miles were empty, half were with about 1500lbs of cargo in the bed. Mostly interstate driving at about 70mph.
However, every time the "cleaning exhaust filter" message comes on in the screen it feels like the truck looses all power for a second. The first time I was going up hill with cruise control set at 70 and it felt like stomping the brakes then hitting the gas all within a second maybe.
View 14 Replies
I haul a 5th wheel camper about every other month. The rest of the time, my truck is a commuter mobile. On one of the camper forums, the guys were talking about how clean their 6.7's run and how their exhaust pipes are clean. Well, the last time I camped, I walked around the campground looking at exhaust pipes on 6.7's. Most have clean exhaust pipes. Mine has dirty exhaust pipes! Does this mean mine is not running properly or is it the way I drive? Anything to be concerned about?
View 14 Replies
During a heavy rain the "water in fuel, drain filter" warning came on. I drained the filter like suggested and a water bottle full of water drained out. This is less then a week after I had the titan fuel tank installed. After I drained the fluid I restarted the engin and "reduce power an water in fuel" warning came on. I am 250 miles from the nearest ford dealer. How major is this???
View 12 Replies
I recently bought a certified used 2012 F-350 a couple of weeks ago. I was reading the diesel insert in the owners manual and came across the exaust filter cleaning notification. I have already put almost 3000 miles on the truck and have yet to see the notification. My brother has a 2013 and said that his comes on every week. I don't know what the previous owner did to the truck, if anything. It is very clean and everything else is stock. I am averaging over 19 mpg combines and it runs great. This is my first diesel truck and I am certain that I will never go back to gas.
View 14 Replies
I'm new to the 6.7 so I'm still learning as much as I can. I recently added the exhaust filter screen to the display using forscan. I had a regen yesterday. I drove the truck until the exhaust filter displayed 0% full. I've driven about 130 miles today and noticed the exhaust filter is now 50% full. That seems really quick to fill halfway up in so few miles. Is this normal? If not what would cause it? I'm really entertaining the idea of deleting the rocket ship under the truck.
View 13 Replies
New truck does it's first regen at 100 miles!
I Experienced my first REGEN last night. We were on the highway for about 20 minutes at 55 MPH when the dash lit up "Cleaning Exhaust Filter".. The odometer was at 100 miles and it lasted until 115 miles. The fuel economy dropped from 14.6 to 13.9 pretty fast.
There was no notification when it was done with the Regen other than the instant fuel economy gauge climbing pretty quickly.. So 100 miles on it and it was already sooted up??? Is that uncommon?
View 4 Replies
I have a 2011 f-450 6.7 - truck has 70K miles. The other day I was driving and the message said "Cleaning exhaust filter ". I usually keep it running a little to finish. Then shorty after a warning message came on which said "800 Miles to Exhaust fluid empty". So I went to fill tank and it was FULL. Now the warning keeps showing up each time I start the engine. It now says 300 miles to empty. I'm afraid it's going to go into limp mode even though the exhaust fluid tank is full.
View 14 Replies
In the last year I've had a NOX sensor fault (dealer repaired) and a DEF heater fault (I replaced). I'm now getting an EGT sensor fail. Every fault is with the same system.
I'm also realizing that while I'm getting the exhaust system cleaning message, my DEF level is not being depleted.
All the dealership wants to do is change out fault codes but I think the true issue is elsewhere.
2011 F250 SD FX4 6.7L (stock)
View 4 Replies
I'm checking my fuel filter regular (draining, examining.....basically OCD **** stuff) and I'm spilling diesel around the bowl. I've learned to put a rag around it now, but what's best way of cleaning diesel around that area? I'm tired of my wife complaining about smell. Simple green, purple power, etc???? Also, tell me what to watch out for.
View 14 Replies
My 2012 F350 Lariat has 6100 miles on it now and on the way home tonight I got a "speed limited to 50 mph in 50 miles" message on the display. It states that there is a "diesel exhaust fluid system fault". The def was topped off about 2000 miles ago and the message center says that the fluid level is "ok". I am going to be on the phone with the dealer first thing in the morning. This is my personal/work truck and if I can't tow a trailer then I can't work. My guess would be a faulty sensor. I have no doubts that the dealer will get this resolved quickly as they have been great about everything else. I also want to say that other than this, I am sure minor issue, this truck is awesome!
View 14 Replies
2015 F350 King Ranch. I am constantly getting flashed when my low beams are on. They are pretty impressive for factory headlamps but the high beams leave much to be desired. They pretty much suck.
376 mile trip tonight, 200 miles of it in the dark. I was flashed six times. I drive this trip twice a week, every week, almost always in the dark (Alaska). I'm usually flashed by on coming traffic a similar number of times each trip. The trip is usually made late at night so there is little traffic... so getting flashed 5-7 times could often mean 50% of the traffic.
Happens whether the truck is empty or loaded. Only people who don't flash me are semi trucks but cars, trucks, etc do.
Lights appear to be aimed fine and I haven't touched them since I got the truck new back in June. I find myself running the high beams, which provide less visibility than the lows, so on coming traffic can actually see me switch the high beams off in an effort to avoid getting flashed. Nope... they still flash me.
View 14 Replies
I just pulled over when my truck flashed reduced power. Pulled code and it came up poo88. What to expect?
View 3 Replies
My '04 F250 6.0L has 220k on it. I've had the EGR serviced several times and, unfortunately, the intake manifold boiled out in one of those services.
The engine light is on now and I've got "EGR Performance Problems" just below 2000RPM most of the time but not all of the time (runs better when warmed up)
I've been unemployed for quite sometime so I'm going to have to make this fix myself.
First question, of course, is should I plan to clean or replace the valve?
The second is how to clean the manifold chambers (? right word? The carbon accessible when the EGR is removed. I've seen people on YouTube scraping them with what looks like brake tools. Is there an appropriate tool or chemical?
The third question is is it going to be very difficult removing an EGR valve that may have carbon buildup on it? Too difficult for an aging seldom mechanic to think about tackling?
I guess those are good starter questions. I didn't know until today that EGR cooler may also be part of the problem. Unlike many of the people who post here, I have not kept good repair records. I don't know when I last had my EGR valve replaced at the Ford dealership but it was probably 50,000 miles ago.
View 12 Replies
Is this the same thing as the regen? Got it for the first time yesterday at 775 miles. Just curious. On a related note, I've tried to run around town some with 5th and 6th locked out (speeds of around 55-60 on a regular basis, running about 2300-2500 rpms) to try to run this process...am I doing it wrong?
View 10 Replies
