Ford 6.7L Power Stroke Diesel :: Backup Camera Won't Working?
Feb 27, 2012
Went to back out of the driveway yesterday and no picture on my nav screen. It switched to the camera screen but it is just black. I unplugged the connection at the rear of the truck before the tailgate and plugged it back in. Everything seemed fine with the connection. I also have a lock pick installed but if I remember correctly the camera still plugs directly into the nav unit.
View 14 Replies
Advertisement
Was wondering if there is a way to adjust the view angle of the back-up camera? Mine appears to be a little off center.
View 6 Replies
How to fix a backup camera that quit working this morning. Never had a problem till backing into a parking spot at work this morning.
View 1 Replies
Issues:
1. Backup camera sporadically does not come on in rear view mirror. Has already been replaced by Ford dealership.
2. Backup camera settings Visual Park Aid and Guidelines sporadically are set to 'off'
3. While truck is running, start seeing warnings/hearing chimes. Emergency Brake (which isn't set), Engine Overheating, Check 4X4, etc.
4. Truck will NOT start. Won't even attempt to turn over. When this happens, I have a radio but the LED screen is usually blank.
These sporadic issues are starting to seem to be related to the use of the emergency brake. Use of the emergency brake does not always immediately cause issues. Now that I feel like there is some kind of connection, I have been setting the e-brake when I park it (even if not needed) trying to force things to happen because Ford says if they can't make it happen they don't know where to look/what to fix. I can't always make things happen by using the e brake...but am noticing things happen more often when I DO use it and when things happen (like backup camera won't work) setting the brake will make it come on and then I can release it and back up. If it won't crank while the brake is set, releasing it will cause it to crank. The other morning when I had all the warnings/chimes going off setting the e-brake made everything go back to 'normal'.
Yesterday when I came back from lunch I parked and set the e brake (on level ground). Got in it to leave work, left e-brake set, stepped on regular brake and tried to crank....nothing but radio. Called dealership. They had me try putting the key in, pressing the regular brake, and try to move the shifter from Park to N. Shifter wouldn't move. Then asked to turn key to just get it 'active' and try again. Shifter wouldn't move. Asked me to turn the key to crank and try again. Same thing - shifter wouldn't move. Truck finally cranked after I released e brake. Came home, parked and set e brake and turned it off. It re-started right up with e brake still set.
View 14 Replies
I have a 2013 F350 Lariat. Recently, the backup camera has stopped working about 1/3rd of the time. When it doesn't work, a yellow triangle icon appears on the screen with " Camera unavailable. See dealer." The dealer has checked it, twice, and is unable to locate the problem.
View 13 Replies
My backup camera is only working about 20% of the time with no pattern to it. When I shift into reverse I get a bright white screen with colorful vertical lines in it. Everything else about my display works fine. Is there a way to reset something on this? Every now and then it works but most of the time I get the white screen with vertical colored lines. It's a 2006 package #8 with 63k.
View 13 Replies
I have a problem with my Backup reverse camera, actually my tiguan not bring it with camera backup and I install and change the radio for rcd 510 bosch with backup camera port,
View 6 Replies
I have a 2006 lexus gx 470 with factory backup camera that has stopped working? Is there a way to diagnose if the camera is bad without getting new unit? Also must one remove the back panel to get to the camera?
View 4 Replies
Having problems with warning beeper staying in the "off" position?? i am going to try and unhook the battery, but if that doesnt work, then what to do...
View 12 Replies
My 16 year old F250 4X4 diesel has developed a problem with no backup lights working, and the vacuum pump is not getting power. The fuse (#28) checks out OK, and I'm told to check for a broken wire on or near the backup switch. I don't know where to locate the backup switch. I have the huge Ford Service manuals, but they are written with the perspective that you should already know where the switches are. Where to find the switch?
View 4 Replies
Last night I backed my truck up to allow another family member to leave, and the back-up sensor alarm started beeping, like it does when the tail-gate is down and backing up.
The truck had not been driven on Christmas day, but it had rained and snowed lightly (dusting), then the temp dropped to 20 degrees.
Can a light dusting/ice cause the sensor to react the same as a close object. I think it does, just trying to confirm.
View 14 Replies
So my 2012 rearview camera was super clear and this 2013 is super blurry! Only difference is that this one has has MyFordTouch with no nav. The 12 had the nav option. Camera lens its self looks clean.
Oh yeah and the thing automatically autoplays my voicemails as soon as I start the truck and I hate that it does that. Can't figure out how to get that from happening.
View 14 Replies
2013 F350 Lariat with the factory OEM rear view camera. I am replacing the tailgate with a 5th wheel tailgate for a few months and would like to still retain the convince of a rear view camera.
I have obtained a Ford camera harness to use as a jumper for a non OEM camera which comes with the standard basic RCA wiring which I plan to mount to the bottom of the 5th wheel tailgate.
My hope is to wire the camera direct to the Ford wire harness which is a 6 wire pigtail. Which wires on the camera mate to which wire on the trucks wire harness.
View 14 Replies
I recently bought aftermarket CCD camera kit from eBay for my 2014 Prius-II and got it installed by best-buy geek squad. But camera is not working due to power problem. According to best buy technician, Prius factory harness is not supplying power when car is put in reverse gear. I am not sure how to address this problem.
View 9 Replies
My backup camera (2013 KR) comes on in Neutral. Is this normal? Looks cool when going thru a car wash though....
View 14 Replies
I bought the truck in 2005 but now that my kids are driving it I need to add a rear camera or sensors.
View 3 Replies
Currently I have a license plate camera wired always on connected to a 7inch lilliput monitor infront of my center console on that hump in the floor. The monitor is connected to a 12v plug on the dash. In this configuration, I have to reach down and turn the monitor on whenever I want to reverse and im hoping I can make it turn on whenever I go into reverse. Right now, if I turn it on then turn the truck off, the monitor stays on with a bright blue no signal screen which forces me to turn the monitor on, then off, every time I reverse if I want to use it.
Any way to make the monitor turn on/off when I put my Ex in reverse?
View 14 Replies
I am having a real hard problem trying to find the ideal place to mount my backup camera on my 2004 Ford Ranger... Looking for some pics of your mounting location.. Closest to the center of the bumper would be best if possible...
View 13 Replies
Looks like a great option the Job 1 trucks missed out on. Looking into the feasibility of it. This is my first Ford so I am not really sure how the factory plans these things out.
View 14 Replies
My reverse camera goes over the mirror, its a mirror when not in use and a camera when in reverse. The way this one is set up, the camera taps switched 12 volts at the rear of the car (tapped trailer connector for these) and the video signal runs forward (ran under headliner to center console to mirror). The monitor needs 12 volts, ground, and + 12 volts when I shift into reverse. I just read a half dozen threads where people suggested tapping into a black wire with pink stripe in the driver's kick panel. Just checked, no such wire on mine. I do not want to run a wire back from the taillight, this seems backwards since the power goes from the front of the truck to the reverse light in the taillight I just need to find the right wire. I checked the reverse relay and the fuse in the fusebox and they are both 12 volts when the truck is on, so they must be prior to the reverse switch.
View 14 Replies
Lately my backup camera doesn't turn off when I shift from Reverse to Drive, I have to put the truck in Park and then go to Drive to make it turn off. Is this a software update problem?
View 10 Replies