Ford 6.7L Power Stroke Diesel :: 2013 - Low Pressure Fuel Pump Housing Cracked?
Oct 4, 2016
This pump hangs down fairly low and appears easy for ice and rocks to hit on my 2013. Something hit mine and took a chunk out of the drain tube. No leaks yet but I am looking to get a new one and keep this as a spare, or just JB weld it. Can I just buy the lower section, or do I need to get entire pump?
Any creative protection bracket made? Would just have to take it off to change filter though. Any leak in this housing is a major show stopper when in the middle of nowhere! Maybe why it is getting brought into the tank on new models?
View 6 Replies
Advertisement
]I am in the process of swapping my oil cooler. When i pulled the smaller cover off of the cover that goes over the oil cooler, i heard a pop. The cover, not the one that bolts onto the motor the one that bolts to that, is cracked...bad. is there a place i can get one? need to know parts illustration with numbers?
View 14 Replies
So, I just had the fuel pump replaced on my '15 6.7 a month ago and it just died again. (next day edit: it didn't actually die, it showed all the same symptoms)
Same symptoms: whining sound, low fuel pressure warning, reduced power warning.
This time I'm 50 miles from home so I pulled off the road before it shut off. Interesting, I was in a hilly area and my low fuel warning came on too. We are waiting for a tow. I was considering trying to push on but don't want to get stuck in a dangerous spot on the highway. We're in a church parking lot.
So, last time this happened I was on flat road with about a half tank of fuel on a lunch break. I ran a mile after the warnings came on to feel out the issue and to see what would happen. I happened to be only about a mile away from my dealer so I drove that way. I got reduced power warning and then it cut power on me (limp mode). I made it to about 100 yards away before it cut off.
This time, I was in a hilly area at night on a windy two lane road with no shoulders in the woods. I was miles from civilization and was showing below a quarter tank of fuel. ~100 miles to EMPTY. I got the low fuel pressure warning first and then the reduced power mode before the whining noise started. I was climbing a hill on a curve at the time. I drove a quarter mile and then pulled off the road into a parking lot so I wouldn't be stuck on the shoulder. It didn't actually go into limp mode.
I let it sit a few minutes, talked it over with the wife and decided to call for a tow. After talking to the tow truck driver who said he would be an hour because he had to go find a bigger truck, I decided to see what I could do while I wait. I fired it back up and the fuel level dropped to below 1/8 and I was now showing 33 miles to EMPTY. I was parked on a hill with the back end up. I had backed the truck into a space to make it easier for the tow truck driver. I let it run a minute, checked for leaks and it seemed to run fine with no studdering or additional warning lights.
CEL was on but no new warnings. I put in my code reader and pulled the P0087. Just one code. I revved it a bit to see if there were any issues. It seemed fine so I decided to try my luck. I started driving towards home with the intention to stop at the first diesel station to fill up. Truck ran fine. After two minutes of driving gently, heart racing, my fuel level came back up and it now read 88 miles to EMPTY. I drove 11 miles to the nearest station and filled up. No issues. I shut it down. I fired it back up. Still no issues so with a full tank, I drove home the remaining 30 miles without issue.
Planning to take it in to the dealer Monday to get it checked. Could this be from an air pocked due to low fuel level and hilly terrain? Is my new pump dying already? Is there something else going on inside the tank or elsewhere?
View 14 Replies
So I just replaced the low pressure fuel pump on my 14 6.7 and it seems to be running as good as it was before. I need to get an aftermarket fuel filter setup for my truck. So what are you using, why did you pick that particular system and is it working, does it really work for taking out water and other contaminates? These fuel systems don't seem to be up to par in filtering modern day fuel, I need peace of mind.
View 14 Replies
I am a new diesel owner. I bought a 2014 F250 about 9 months ago. Three times in the last 50k miles I have heard the fuel pump near the tank making noise. Twice, while making the high pitched noise I have gotten a low fuel pressure warning and reduced engine power.
The first time, I left the truck with the dealer for two days while a tech drove it around. everything checked out fine. (30k miles)
The second time I heard the noise i did not get the low fuel pressure warning. (40k miles)
Today, I heard the noise and got the lower fuel pressure warning just before the truck stalled out. Lucky for me, I was near home. After a minute the truck start and I nursed it the last mile or two. (56k miles)
The tow truck just picked it up and is off to the dealer. It sound to me like the low pressure transfer pump is bad or going bad.
View 14 Replies
I have a 2006 Sonata with 88,000 miles on it. Currently, and for the past 11 months, the CEL has been on and the code always returned is a p0456, very small evap leak.
I searched for leaks but couldn't find any. I also replaced the purge control valve, but the same p0456 continues to reappear. Of course I also made sure the gas cap was on tight.
I received a coupon from the dealer for a free diagnostic so I took the car in.
The dealer reported the code as p0455, large evap leak, and said the cause was a cracked fuel pump housing. Cost to repair $850. Seems to me the dealer just picked the most costly part to replace, although I can confirm they looked at it because they forgot to screw the access cover back on.
So what I would like to know is how the dealer would have made such a diagnosis? I cleaned and inspected the outside of the pump and saw no crack, but I also understand that the crack may be too small see.
I want to be able to confirm that the dealer's diagnosis is correct, but how can I do that? I have a hand operated vacuum pump and access to shop air to aid in the diagnosis.
I read elsewhere on this site about pressurizing the system and putting soapy water on the area to show bubbles where the leak is, but where would I connect the air hose? And more importantly, what is a safe pressure to use?
Of course tracking down the cause of p0456. I know the charcoal canister could be problem as well, but I'd like to find some way of isolating down the failing component.
View 9 Replies
Recently my 2011 F-250 Diesel with 21,000 miles seemed to start hard one morning. After starting the truck it ran well that day and started fine. The next morning it would not start. Had it taken to the dealer and they went to work. Started at the fuel filters and replaced low pressure fuel pump. Thought a piece of the defective pump had moved up fuel line. Removed high pressure pump and found signs of rust. All regular service intervals have been met. Didn't see this coming. No water in fuel light or other warning.
View 14 Replies
I have a very slow fuel drip off the housing for the fuel filter on the engine. Can't see where it's coming from. It started sometime after I changed the filter a couple of months ago.
View 5 Replies
Within the last month I've had 2 cracked fuel filters the filter up by the engine...
View 12 Replies
This past week my wife and I took a short trip and returned on a gravel road. I went to start my truck the next morning and there was a puddle of diesel fuel on the driveway. When I looked under it, I noticed that the tip of the fuel filter housing is gone and is leaking slowly from there. I called the dealer and they would not fix it on warranty, the truck has 20k on it. The service man said he would not turn this into ford. I've had the similar problems with this particular dealer. It's obvious that a protective cover is needed for this. I kept the part and am thinking of sending it to ford.
View 13 Replies
My question is can a cracked injector tip let gases back in the fuel system?
View 4 Replies
My truck gave me low fuel pressure and reduced pressure limp mode at 21,000 miles. The fuel and air filters were changed at 16,000. The dealer said all they found was the fuel filters (at 21,000) were what needed to be changed. Also, why does my truck hum??
View 14 Replies
I've got a leak that appears to be coming from the secondary fuel filter housing (the one in the engine compartment)... It's not coming from the filter, but from the side, where there are 4 allen bolts that attach a fitting to the side of the housing...Can I change out the gasket for that piece? I've already tightened the bolts, but the leak persists.
View 14 Replies
I have my aux fuel tank pump hooked to upfitter 3. It has worked perfectly until this week. I started to transfer fuel and the aux fuel gauge and fuel pump both quit. The led on upfitter switch 3 still illuminates, but no fuel pump. I found fuse 9 on passengers kick panel is for upfitter 3. The fuse was good. Is there another fuse somewhere for the circuit I've missed? I can trouble shoot the wiring if necessary, but it's tough to do all behind the left side underbed box and not easy to get to. I've missed something simple before I go further????
View 14 Replies
no change, changed stand pipe and dummy plug on driver side, no change and guess what? Now I am stuck on the side of the road waiting to give my last $100 to a tow truck! Engine is hydrolocked, fuel pressure is low, starts off at around 20 and works up to 54 with key on engine off, and that is as much as I know from the side of the road with out my AE. Blew white smoke also. Smelled of unburnt diesel. I think it's linked to my rough running issue. Maybe a bad injector? But every time I did the click test they all passed. Idk, I'm gonna remove the glow plugs and see which hole is loaded and with what. . .
View 14 Replies
2013 6.7..46k miles.
I know we have crappy radiators. that's why I bought the premiumcare plan. had that replaced at 45k..200 miles later smelling coolant. take it in they say the water pump is leaking from a "weap hole"...great...get it back..still smell coolant. very fricken frustrated. Not what I expect from a 45,000 dollar truck. especially a 2013....
View 14 Replies
Driving to work out of town and low fuel pressure came on screen.... fuel filters??
View 14 Replies
I just installed my fuel pressure gauge, only to find out that I'm running with low fuel pressure at wot. My filters have a little over 2000 miles on them and I've had the blue spring installed for a while now. It drops to about 36psi from 61 or 62psi. What could be the culprit? Also I'm running the out of the box street tune that comes with the sct x4 because I get about 15mpg with it.
View 11 Replies
I am installing a fuel pressure gauge into my 02 7.3 I went to the thread the sensor into the plug hole on the fuel filter housing and it wasn't threaded, turns out the sensor thread is slightly smaller and a different thread ... The directions say to install it into the filter housing or the lift pump ... So I'm assuming I have to go the lift pump direction of installing it but where the lift pump is or how to install the sensor into it while not throwing a code or causin problems ... A step by step and even pictures.
View 14 Replies
So I'm stumped I have an 04 6 liter and I have no power to my fuel pump. My fuse under my Dash is good which is a 20 amp fuse which is number 40. My inertia switch is not tripped and I have power to it however my fuel pump does not have power what else could it be? Is there a relay somewhere else?
View 5 Replies
truck runs fine changed fuel filters could it be bad sensor .no cold weather
View 2 Replies
