Ford 6.7L Power Stroke Diesel :: 2012 F350 - Oil Leaking Through Exhaust
Oct 31, 2016
This past Monday I was finally able to pick up a 2012 F350 dually and over the weekend I was able to do an EGR and DPF delete and I come to find out while under the truck that it has an oil leak I looked under the hood and it seems that there is oil around the turbo and after the test drive there is a LightStream of oil coming down the exhaust.
Another question is that I have read about the possible problem is that early build 2011's have that's why I chose to look for a 2012 so I didn't even consider looking at the build date when getting it and I come to find out it was November 2011 and this truck has a plastic oil pan should I be worried about The possibility of this engine taking a dump on me and if so what can I do to prevent it?
View 1 Replies
Advertisement
My 2012 F350 Lariat has 6100 miles on it now and on the way home tonight I got a "speed limited to 50 mph in 50 miles" message on the display. It states that there is a "diesel exhaust fluid system fault". The def was topped off about 2000 miles ago and the message center says that the fluid level is "ok". I am going to be on the phone with the dealer first thing in the morning. This is my personal/work truck and if I can't tow a trailer then I can't work. My guess would be a faulty sensor. I have no doubts that the dealer will get this resolved quickly as they have been great about everything else. I also want to say that other than this, I am sure minor issue, this truck is awesome!
View 14 Replies
Last winter I pulled something and getting out has been difficult. Climbing in my F 350 even tougher so it hasn't been used much. Now that I'm driving a bit I have not seen it regen. Truck stop regenning, is it possible? What happens if it just stops? It use to regen every 200 miles or so and I have been paying attention.
View 7 Replies
So this '06 F350 is blowing fluid from the steering pump fitting when you move steering wheel to either side all the way(lock). Is the internal o-ring blown in the fitting? Do these have the teflon seal at the pump? Pretty new to the 6.0 scene. Got a new line ordered.
View 6 Replies
I have been smelling a slight exhaust smell in the cab of the EX. I slide under the truck and looked at the up pipes and bellows. I saw a slight amount of soot on the outside of both bellows. So does that mean I have a leak? What is the most economical fix? Does the turbo need to be removed?
View 4 Replies
Took my '11 F350 CC 6.7 Lariat with 31k miles on it into the dealer to have the tranny fluid leak looked at. I noticed this leak a few weeks ago as the bell housing was damp with fluid and the bolts heads on the underside of the poly engine oil pan were pooled with fluid. It is a very slow leak as I have parked it for 3 days and there were no drips of fluid on the ground, just collecting on the grid like pattern on the oil pan. Checked Fluid level and it is also full.
Anyway, the dealer put dye in the tranny fluid and told me to drive it for a few days. I took it back in on Monday and called this morning for an update. The mechanic informed that they ordered a new torque converter and some other parts to be "proactive" because he believes the TC is the issue. I asked if the cab would have to be pulled and they informed that all the work could be done from underneath. Glad I noticed this before the B2B warranty expired because this would have been expensive. I will be THOROUGHLY inspecting the entire vehicle from top to bottom before I hit 36k.
View 11 Replies
I have a 2004 Ford F350 6.0. It is leaking diesel from the front of the engine to the ground. I have a video of this and pictures as well but I'm not sure what I'm looking at. What I can do??Puddle after about 20 min of running.
Dripping from here, left of hose....
View 11 Replies
Is the A/C condenser pretty simple to replace on the 2006 F350? Replaced the compressor but then noticed the condenser was leaking. Looks simple just wondering if there are any quirks to it.
View 14 Replies
2007 F-350 6.0L, Wife phoned and said that the truck backfired a couple of times and there was black smoke from exhaust. When she stopped at idle there is now alot of white smoke but coolant level looks fine. She has about 200 km's to go before she is home pulling a 20 foot horse trailer with 1 horse.
View 14 Replies
I have 07 F350 6.0 never heard this out of any of my 6.0s. it's almost a whine but can hear it w turbo and out of empty exhaust. Almost like a supercharger noise stumped almost leaning towards actuator for turbo? Noise got real loud swapped turbos used same actuator noise is there but much quieter.
View 1 Replies
I recently had my injectors changed at Ford and while I was driving it started dumping coolant. If the leak can be cause from the injector replacement or if they didn't put something back together right... 2005 f 350 6.0...
View 14 Replies
I have a 2013 F-350 with the 6.7L. I pull a 36' 5th wheel with a Swivel Wheel motorcycle on the back. So I'm pretty heavy. Plenty of pulling power, but going down hill, the automatic braking doesn't work anywhere near as well as the exhaust brake I had on my '96 F-250 with the 7.2L. Considering installing the BD Dual Vane Exhaust Brake. Looking for feedback about installing the BD DVEB. How well does it work?
View 2 Replies
Attempting to take this on myself. My passenger side manifold was replaced a year ago.....BTW This damn truck - all stock - no modifications of any kind - just turned 100k miles. One owner - me.
So I have removed everything I think I need to to gain reasonable access including the fenderwell and all the intake tubes and battery and coolant reservoir. I want to use some heat and try not to break the bolts but there is a thin wiring harness just above the exhaust manifold. I can't find it in any diagrams on the ford parts site. It looks like the glow plug and injector harnesses are up above near the intake manifold but this one is down below all that. It connects to small rubber thing - 1 for each cylinder. There is nothing else electrical near it - everything else is up top.
Now my rant - look away if you are a die hard ford truck fan or 6.0L powerstroke fan.
So far I've had to replace both exhaust manifolds because they burned and rusted right through. New transmission cooler lines -yes - rusted through and cooler (because we couldn't get the lines off without destroying the cooler). Cat got clogged (that was fun to find and fix). All 4 front ball joints replaced. Transmission dip stick tube rusted through. Several brake lines had to be replaced due to rust. The air conditioner quit with about 80k miles. I haven't fixed that yet. My oil pan is rusting through and needs replacement. Friggin oil pan! I have never in my long life experienced that. I know of other diesel pickups that are older with far more miles that live in the northeast, used for plowing and never garaged that don't have their oil pans rusting through. Just had to change both power steering lines that go to the gearbox due to leak caused by rusting through. EGR needs to be cleaned or replaced almost as often as the oil need changing. This POS needs to be out of my life!
Too bad because if it was dependable and wasn't made out of the cheapest crappy metal Ford could find it would be a great truck. Rides and hauls great. Plows great. Good looking truck, too. Standard cab 8 foot bed. Dark green. Just can't keep doing this.
View 13 Replies
Well at 200,008 miles it's time to change my newly leaking EGR pipes. Is there gaskets that goes with these parts? difficult to install? Part numbers? no "installation kit".
View 14 Replies
Read that this is a common issue, leaking out crimped seam on lower LH (2012 F250 King Ranch). I have called Ford customer service twice, they said "we do not have any recall or programs to cover the out of warranty repair". I keep adding coolant and thinking eventually Ford will address this problem. They did cover my bad EGT sensor....
View 9 Replies
Is there a way to reset the CEL on a 2012 F350? I've tried unhooking the battery, but that didn't work. I know exactly what it is, one morning I was running late for work. And forgot to unplug my heater core plug. I know, I know, Just forgot about it when I was in a hurry. I just don't wanna pay the Ford house to reset it.
View 1 Replies
The truck (2012 f350 6.7 lb cc 131,600 miles) started fine. Then while i was setting up the defrost i accidentally hit the ac button. Well I then hit it again to turn off. At that point the engine stalled. Which has never happened to me before. I started it back up which took a bit longer to get it to fire. It now says "Reduced engine power" and runs kinda rough. I thought well im at the end of my fuel filters life so why not change it since i had one. Well the. The FF housing broke. After replacement FF housing and filter it will no longer start. I took the filter back off and checked to see if it was cross threaded or sucking air. I checked that twice. Still no start cranks fast and strong. Codes are
P2138 something to do with the gas pedal
P0193 fuel rail sensor A high
P06A6 voltage on circuit A is whacky (paraphrasing here)
P0532 ac pressure sensor low
View 7 Replies
I just took my new (to me) 2012 F350 out for it's first real tow job; pulled our 9,500lb travel trailer up and over the Sierra Nevada Mountains for a week long camping trip.
Under load, I started to smell a burning metal/paint smell in the cab, to the extent that I was wondering if something was wrong. All of the gauges were fine, and there was no unusual smell under the hood.
My wife discovered the floor on the passenger side was hot to touch (directly above the exhaust), and it actually started to melt a few plastic items in her purse.
I did just have the EGR valve replaced after it threw a code; not sure if there's some coating on the new one that could be burning off.
Isit normal for the floorboard to be that hot when working thes trucks?
View 14 Replies
I own a 08 F350 which has 4:10 gears. After this last trip to AZ pulling 5th wheel and only getting 7 - 8.5 mpg driving 65 most of the trip, I'm seriously considering a new F350. Switch from 2008 to 2012 with about the same truck? I'm thinking of going back to 3:73 which I know works a bit. But if someone did switch what was your mileage difference. I have been also tossing idea of replacing my 4:10 with 3:73 to improve mileage. My 08 only has 24k on the clock.
View 14 Replies
I have a 2012 f350 srw that I'm trying to rectify an intermittent p1249 dtc. What I found initially was a broken vacuum line from the egr solenoid valve to the activator. This made the truck run good and the dtc code cleared. It came back two weeks later, the truck did not go into the reduced power mode. I pulled the MAP sensor to test it and it was completely plugged with soot.
I replaced the MAP sensor and removed the upper intake, cleaned out the soot, which was considerable, vacuumed out the lower manifold cleared the code. It went without a cel for about 1000 miles and came back. My questions are: where to go next and if the soot is normal for a 116K engine would I be better served by deleting the egr/dpf/def?
View 11 Replies
I was getting ready to replace the carrier bearing and noticed the rear pinion seal is leaking. Before attempting the replacement myself, I would like some opinions on the noise in the video below. Is this normal? I am confidant I can replace the carrier bearing and pinion seal, but not sure I have the tools for anything else.
YouTube ...
View 4 Replies
