So i did this with mine but friend just bought 06 6.0. How do u shut the chime off for the seatbelt again. I know parking brake on key to on position not run. How many time do u buckle and unbuckle again?
View 14 RepliesIs it possible to turn off the seat belt chime? If so how?
View 11 RepliesNeed to eliminate my seat belt chime and if you know how I could get it done.
View 5 RepliesI would love to find a way to turn off the seat belt chime off. Also would love to have the radio skip the accept screen.
View 2 RepliesWhen I purchased my new 2008 RX 350 I was able to turn off the seat belt chime using a hack. I recently purchased a 2015 RX 350 and have tried to do the same but have been unsuccessful. How to do this to the 2015 RX 350? Please note that the 2014 hack does not work on the 2015 model year.
View 4 RepliesHow to turn these off with vagcom?
View 10 RepliesI just bought my 06 Hyundai accent last night. Just today I noticed my seat belt will chime after I remove the belt, even if the car is in park. It's not a big deal but it was enough to make me look through the owners manual to see if it could be disabled. Well, I didn't find my answer so I thought maybe someone here has already done it. So, how to disable the seat belt chime?
View 7 Replies2015 AWD. How do you fully turn off the traction control?
Seems like i can press the button and it comes back in a minute. I tried holding it down.
Also, the seat belt chime. I take off my belt once I get in a parking lot, and the chime is annoying as hell.
We religiously wear seat belts on the road. BUT, on my 4WD Tacoma, driving around a farm they are not needed. Can you simply unplug the underseat sensor to defeat the annoying chime and yet not disable the airbag system?
View 3 RepliesDad's truck 2012 regular cab. Seat belt doesn't like to retract on it's own. The retracter(next to your left butt cheek) works fine, or so it seems. The belt seems to get caught in the swivel mount above your shoulder. I've tried a piece of sand paper in between the belt and the plastic but it doesn't work any better. Is there a way to adjust the retracter? Looking for a solution before we close the buckle in the door frame and have bigger issues...
View 2 RepliesHow to disable the seat belt chime?
View 10 RepliesI just got a new ( used ) 2010 F150 truck from my boss for work.
Is there a way to stop the seat belt dinger when it is not plugged in together ?
It drives me Nuts when i have to move the truck around the shop or on a job
How to disable the belt minder chime on a 2015 SD? I tried unplugging the harness under the seat, but it turns on the airbag light. No instructions in the owner's manual like there was for my 2005.
View 8 RepliesAbout 6 weeks ago my 2004 4.6 scab had a glitch in that when you got going the seat belt warning chimes came on, to clear it stop at the next junction turn off re start and away you go. Now today its moved a step further on, the airbag not working light flashes and then stops on, but no seat belt chimes?
View 2 RepliesInstructions on how to disable your seatbelt chime.
1. Buckle Seatbelt (1.1) go to ACC mode.
2. While depressing the brake, turn the key to the ON position. I Was thinking someone might experiment with in the ACC mode might work by pressing the start button w/o your foot on the brake pedal.
3. Press the trip reset button a few times, stop when the ODO is displayed (not trip distance - A or B). If the odometer starts at the mileage, cycle through anyway.
4. Turn the ignition to LOCK.
5. Unbuckle the driver's seat belt.
6. Turn the key to the ON position again. When the dash lights comes on, press and hold the trip reset button, and count to 20 (slowly).
7. While still holding the trip reset button, buckle the driver's side seatbelt.
8. The odometer display should read "b ON" or "b OFF". Depress the trip reset button to toggle.
9. Unbuckle and Turn OFF the car.
I noticed the passenger side on/off switch for the airbag doesn't illuminate anymore on my 98 Ranger. Whether I turn the key on the switch to on or off it doesn't illuminate either way. The airbag light on the dash flashes showing, counting a code 27 and then it stays on. I also noticed the seat belts on symbol doesn't illuminate and in the owner's manual it says it should illuminate and chime. I remember it use to illuminate but I don't remember a chime.
Someone with a 98 that has a seat belt reminder light that illuminates and chimes until you fasten the seat belt? I don't know if that and the airbag code is related. But I want to fix both? I guess the simplest one to tackle first would be the seat belt light/chime. I don't see a fuse for it. I guess I need to know first is it really suppose to chime.
Door chime /seat belt or key chime comes on random and frequently while driving. With seat belt attached. Bushings in shift handle are worn out. Could this be the culprit? I'd kind of prefer to fix the problem before I disconnect the chime...
View 1 RepliesBought this truck (06 F250 cclb diesel) earlier this year and (as far as the seat is concerned) worked perfectly until about 2 weeks or so ago, when I learned that the passenger power seat works in every direction except for to move the seat back. Since every one that got in the truck didn't believe me and now the seat is almost at the glove box I finally decided I should do something about it. I have removed the fuse and let is sit with the the fuse out for about an hour, no change. I had read on another fourm that if you recline the seat back a few times it resets the module, attempted with no change. It is to the point I need to get into a bit more serious diagnostic processes however I am unsure exactly where to start.
View 2 RepliesIs there a way to deactivate the seat belt chime??
View 14 RepliesOkay, it took me a while but I finally found a "chime stopper" with the correct configuration for the Gen 6. For those of you who (like me) are sick of the stealership telling you that they would turn into a frog if they disabled a safety feature, or that they want an hour of diagnostic time to do so, pick up a set of these [URL] ....
View 3 RepliesI bought my second Prius yesterday and have noticed that the driver's side seat belt sensor is finicky. Please note, I don't want to turn the warning chime off. I know how to do that, and it isn't the solution I'm looking for. I wear my seatbelt always, but in case I do forget to buckle myself (or my passenger forgets to buckle up), I want to receive an accurate warning.
So, here's what's happening. Even when the seat belt is buckled, the warning chime will sound until the buckle is clicked in *just* right. Sometimes it works on the first buckle, sometimes it takes five or six tries to get it right. I've tried the basics (compressed air, checking connections), but neither provided any solutions. What's my next step? Can I buy a new buckle assembly (or just pull one off a junker)?